Cristinel Panfir [Wed, 18 Dec 2019 08:28:16 +0000 (10:28 +0200)]
imx-parser: Upgrade to 4.5.1
- MP3 PARSER: Fix Google Play Music can't seek mp3
- FLAC PARSER: Check meta header lenght to avoid a null header
- ASF PARSER: Add protection when need to allocate large size memory
- Some other fixes for: AVI/MPEG2/MP4 PARSER
ERROR: linux-qoriq-4.19-r0 do_preconfigure: Execution of 'mp/work/ls2088ardb-poky-linux/linux-qoriq/4.19-r0/temp/run.do_preconfigure.13614' failed with exit code 2:
tmp/work/ls2088ardb-poky-linux/linux-qoriq/4.19-r0/temp/run.do_preconfigure.13614: 119: tmp/work/ls2088ardb-poky-linux/linux-qoriq/4.19-r0/temp/run.do_preconfigure.13614: cannot open tmp/work/ls2088ardb-poky-linux/linux-qoriq/4.19-r0/defconfig: No such file
WARNING: exit code 2 from a shell command.
ERROR: Logfile of failure stored in: tmp/work/ls2088ardb-poky-linux/linux-qoriq/4.19-r0/temp/log.do_preconfigure.13614
Log data follows:
| DEBUG: Executing shell function do_preconfigure
| tmp/work/ls2088ardb-poky-linux/linux-qoriq/4.19-r0/temp/run.do_preconfigure.13614: 119: tmp/work/ls2088ardb-poky-linux/linux-qoriq/4.19-r0/temp/run.do_preconfigure.13614: cannot open tmp/work/ls2088ardb-poky-linux/linux-qoriq/4.19-r0/defconfig: No such file
| WARNING: exit code 2 from a shell command.
| ERROR: Execution of 'tmp/work/ls2088ardb-poky-linux/linux-qoriq/4.19-r0/temp/run.do_preconfigure.13614' failed with exit code 2:
| tmp/work/ls2088ardb-poky-linux/linux-qoriq/4.19-r0/temp/run.do_preconfigure.13614: 119: tmp/work/ls2088ardb-poky-linux/linux-qoriq/4.19-r0/temp/run.do_preconfigure.13614: cannot open tmp/work/ls2088ardb-poky-linux/linux-qoriq/4.19-r0/defconfig: No such file
| WARNING: exit code 2 from a shell command.
|
ERROR: Task (/build/sno/sources/meta-freescale/recipes-kernel/linux/linux-qoriq_4.19.bb:do_preconfigure) failed with exit code '1'
This is caused by do_preconfigure() from classes/fsl-kernel-localversion.bbclass
expects a ${WORKDIR}/defconfig which was earlier created by merge_delta_config.
Ricardo Salveti [Mon, 16 Dec 2019 14:37:29 +0000 (11:37 -0300)]
imx-base.inc: add uboot entrypoint for mx8mm
Default u-boot load address is set to 0x40480000 but fitImage
support requires the UBOOT_ENTRYPOINT to be defined as well, so
just extend imx-base.inc to also include a default uboot entrypoint
for mx8mm.
Cristinel Panfir [Wed, 11 Dec 2019 09:54:09 +0000 (11:54 +0200)]
firmware-imx: Upgrade to version 8.5
- Exclude "easrc" as this IP is only applicable for Nano Soc
- Remove SECO implementation from firmware-imx recipe and use imx-seco
to deploy the SECO firmware for i.MX 8QM/8QXP
- Always use ipv6 address to mount rootfs
- support normal ip:nfsroot format to work with connman
- Fix upload problem
- return EPIPE status when pipe close before all data transferred
Cristinel Panfir [Mon, 16 Dec 2019 13:50:08 +0000 (15:50 +0200)]
imx-vpu-hantro: Upgrade version from 1.11.0 to 1.15.0
- [H1]: code refine for error handling to avoid blocking
- [H1]: Driver enhancement for suspend/resume
- [ION]: Enhance for 32bit compatibility for decoder and encoder
- [H264] Handle interlace video correctly
- [VC1Dec] Return error to avoid segmentation fault
- [H264]: decoder enhancment in h264bsdGetBits() for corrupted clips
- [Common]: support for security mode
I've tried build linux-variscite where the maintainers seem to have
copied the 'merge_delta_config' task from the linux-qoriq recipe from
meta-freescale.
When i tried to use that task to add some linux kernel config flags it
did not work. It seems like the 'do_preconfigure' task inherited by the
'fsl-kernel-localversion' class deletes all content of the '.config'
file AFTER it has been merged by the 'merge_delta_config' task.
I reordered the tasks so that merge_delta_config is run after
preconfigure:
addtask merge_delta_config before do_configure after do_patch
do_preconfigure
which solved the problem for me. The flags were then added and compiled
into the kernel.
With the change to linux-imx-headers 4.19.35 the build of imx-alsa-plugins
fails. Likely "linux/mxc_asrc.h" would require an include.
In the latest sources this is done in the source file which includes it.
| /workdir/oe/tmp/work/aarch64-mx8-tdx-linux/imx-alsa-plugins/1.0.26-r0/recipe-sysroot/usr/include/imx/linux/mxc_asrc.h:125:2: error: unknown type name 'snd_pcm_format_t'
| 125 | snd_pcm_format_t input_format;
ff.
From the imx-alsa-plugins commit:
Include latest asrc_pair change for k4.14 build [YOCIMX-3558]
asrc_pair: update according to latest mxc_asrc.h
The mxc_asrc.h is updated for supporting new module on 815.
The main change is the xxx_word_width is replaced by xxx_format.
As we've switched to use git fork build, change recipe PV to 'git'.
Will upstream this recipe to community later.
Signed-off-by: Yuqing Zhu <carol.zhu@nxp.com> Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
linux-imx: Update kernel recipe to version 4.19.35
- Update kernel recipe to latest revision of 4.19.35
- Sync arm architecture defconfig file with imx_v7_defconfig
- Sync arm64 architecture defconfig file with defconfig
Andrey Zhizhikin [Tue, 19 Nov 2019 22:07:53 +0000 (22:07 +0000)]
linux-fslc-imx_4.9: resolve version for cve scans
CVE scanner is unable to parse the version of linux kernel recipe, which
caused warnings to be produced during the scan task since kernel version
was not properly identified.
This was caused by the fact that CVE_VERSION is set per default to PV,
and PV of this receipe does nto resolve in a proper (and actual) kernel
version provided.
By setting CVE_VERSION to explicitly point to KERNEL_VERSION, this recipe
effectively provides a proper kernel version to CVE scanner.
Andrey Zhizhikin [Tue, 19 Nov 2019 20:02:51 +0000 (20:02 +0000)]
linux-fslc-imx_4.9-1.0.x: replace patchset to the one from stable
Replace the patchset, which resolves kernel compilation issues when gcc9
is used. Original patchset introduced here was the initial commit that
solved the issue, while this patchset is cherry-picked from stable tree
branch linux-4.9.y and included included in v4.9.188 upwards.
Once linux-fslc-imx would get updated past v4.9.188 - this patchset
should be removed from the layer.
Khem Raj [Mon, 18 Nov 2019 20:49:55 +0000 (12:49 -0800)]
weston-init: Keep the logic to edit weston.ini to meta-freescale
This logic does not work across multiple layers even OE-Core machines
dont build with it. For now its best to keep this confined to
meta-freescale machines
Idea is good but it needs to align with OE-core's methods where
currently in OE-Core we expect machines to override weston.ini
completely per machine, this logic sort of goes against it. However it
has some goodness to it, eg. adding options based on DISTRO_FEATURES
which OE-Core could have too but maybe implemented differently.
Fix the variable test condition, wich is used during inclusion of
weston.ini file in the agl and non-agl builds.
Since for non-agl build there is no algprofilegraphics in the
collection, variable expands to an empty string and test condition
evaluates to true for both agl and non-agl builds.
This causes the weston.ini file to be installed regardless of whether
the agl is found or not.
Usage of a different condition check (lenght instead of empty) eliminates
this issue.
Chunrong Guo [Tue, 15 Oct 2019 07:15:33 +0000 (15:15 +0800)]
gpulib: add recipes
*update to lsdk 1909 tag
include the following changes: 5a4f7df - gpulib: update to 6.2.4.p4 verstion bea4503 - gpu: remove gpu kernel module from library tree f175bc1 - Add GPU libraries for ls1028a
Chunrong Guo [Tue, 15 Oct 2019 06:53:45 +0000 (14:53 +0800)]
openssl-qoriq: Upgrade 1.1.0g -> 1.1.1d
*update to lsdk 1909 tag
include the following changes: 894da2f - Prepare for 1.1.1d release 1cb7eff - Update copyright year a95b081 - Remove duplicate CHANGES entry 08229ad - Fix a padding oracle in PKCS7_dataDecode and CMS_decrypt_set1_pkey 7ff84d8 - Update CHANGES and NEWS for the new release 79f5e2f - Fix a potential crash in rand_unix.c 1d36536 - Fix a strict warnings error in rand_pool_acquire_entropy 6318018 - drbg: fix issue where DRBG_CTR fails if NO_DF is used (2nd attempt) 5520695 - drbg: add fork id to additional data on UNIX systems 1b0fe00 - drbg: ensure fork-safety without using a pthread_atfork handler 73a683b - [test] ECC: check the bounds for auto computing cofactor 827eab4 - Fix build with VS2008 4bf9781 - Use BN_clear_free in DH_set0_key 8003138 - DH_check_pub_key_ex was accidentally calling DH_check, so results were undefined. 1f9dc86 - Change DH_generate_parameters back to order 2q subgroup 288241b - Fix spacing nit in test/ectest.c 9a43a73 - [ec] Match built-in curves on EC_GROUP_new_from_ecparameters ad9c296 - Configure: clang: move -Wno-unknown-warning-option to the front 9580391 - Append CVE-2019-1547 to related CHANGES entry 87bea65 - Remove x86/x86_64 BSAES and AES_ASM support a6186f3 - CHANGES entry: for ECC parameters with NULL or zero cofactor, compute it eb1ec38 - [test] computing ECC cofactors: regression test 30c22fa - [crypto/ec] for ECC parameters with NULL or zero cofactor, compute it ed0ac11 - [ec/ecp_nistp*.c] restyle: use {} around `else` too
Chunrong Guo [Tue, 15 Oct 2019 05:28:31 +0000 (13:28 +0800)]
tsntool: add recipes
*update to lsdk 1909 tag
include the following changes: 30a0320 - demos:cnc: add Qci enable/disable operations provide to yang a27ea6d - demos:cnc: fix the interfaces and bridges types xml getconfig infrormation ccfc0ae - demos:cnc:add Qci support 50d653b - libtsn: fix compile error a156db9 - tsntool: correct the command name in help info 6739dcb - libtsn: add optional function to monitor the operation of configuring TSN via libtsn eadb457 - Add version v0.3 tag 42ee8f3 - libtsn: add qbu get status showing status a22cdc8 - demos:cnc: update the get-config feedback "interfaces" to "if:interfaces" 495575c - demo:cnc: fix the get-config button out of block when brower pixel low resolution a411c7c - demo:cnc: fix config-change place and enable for port 3d28bea - qbvset: fix overflow of qbv list 1b424e9 - Makefile : add format-security to fix gcc 9.2 build error fix the below error |main/readinput.c:267:3: error: format not a string |literal and no format arguments [-Werror=format-security] 7ec5761 - cnc: fix the qbv disable setting
