Mark Hatle [Mon, 21 May 2012 17:42:34 +0000 (12:42 -0500)]
util-linux: use new update-alternatives
In addition to switching to the new update-alternatives, it was discovered
that the sln, shutdown, halt, reboot and related commands were never generated.
Remove these from the list. (These appear to have been removed from util-linux
some time ago.)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Mark Hatle [Tue, 15 May 2012 16:06:22 +0000 (11:06 -0500)]
update-alternatives.bbclass: Refactor the implementation
Refactor in order to:
* Deprecate the old interfaces, but keep them for compatibility
* Provide a new, interface -- capable of working with split packages
* Each update-alternative will now set proper "per-file" provides
Note: this adds a warning message when the older deprecated behavior is
used. The older behavior has been fully tested using oe-core.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Richard Purdie [Fri, 11 May 2012 14:16:07 +0000 (14:16 +0000)]
image.bbclass: Ensure ${S} is cleaned at the start of rootfs generation
Some image classes such as bootimg save files into ${S} as part of rootfs
generation. For correctness we should therefore clean this at the start of
image generation to ensure reproducibility.
I found this issue when some files I thought should disappear from my rootfs
would not disappear.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 25 May 2012 07:59:02 +0000 (07:59 +0000)]
glib-2.0: Clean up OECONF flags into one variable
Without this change, libelf was "floating" for linuxstdbase for example,
leading to build failures. This patch moves all the common options
into a common variable.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Thu, 24 May 2012 20:51:37 +0000 (22:51 +0200)]
wpa-supplicant: don't let postinst fail when dbus-1 reload fails
* e.g. when upgrading in chroot
Configuring wpa-supplicant.
Reloading system message bus config: Failed to open connection to system message bus: Failed to connect to socket /var/run/dbus/system_bus_socket: Connection refused
but that shouldn't be fatal
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Mark Hatle [Wed, 23 May 2012 20:24:37 +0000 (15:24 -0500)]
package.bbclass: Add additional debugging for dependencies
When trying to understand why a QA wanring such as:
ERROR: QA Issue: foo rdepends on bar-dev
it is very difficult to figure out where the bar-dev dependency
comes from, since many of them are added dynamically.
This adds a debug statement that says which dependency adds an
rdepends to the system.
Also, while doing this work, it was noted that the same dependencies
were being scanned for over and over. Instead we shorten the list
by only added to the dep list if the dependency was not already there.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Bogdan Marinescu [Thu, 24 May 2012 19:49:19 +0000 (22:49 +0300)]
lttng-tools: updated to 2.0.1
Removed patch for ARM compilation, as it seems that the upstream fixed
the ARM compilation problem in a slightly different way (tested by compiling
lttng-tools for MACHINE=qemuarm)
Martin Jansa [Thu, 24 May 2012 14:09:11 +0000 (16:09 +0200)]
wpa-supplicant: add wpa_supplicant.conf to CONFFILES and don't install it twice
* first we install ${WORKDIR}/wpa_supplicant.conf-sane
install -m 600 ${WORKDIR}/wpa_supplicant.conf-sane ${D}${sysconfdir}/wpa_supplicant.conf
and a bit later in do_install we were overwritting it with ${WORKDIR}/wpa_supplicant.conf
install -m 644 ${WORKDIR}/wpa_supplicant.conf ${D}${sysconfdir}
* notice that this patch also changes .conf permissions from 644 back to 600
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Robert Yang [Thu, 24 May 2012 09:08:53 +0000 (17:08 +0800)]
oe/process.py: remove it since it is unused and duplicated
The meta/lib/oe/process.py is only used by oe_run and oe_popen in
meta/classes/utils.bbclass, and they will be removed, we have a better
one: bitbake/lib/bb/process.py, which can replace of it.
[YOCTO #2489]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Paul Eggleton [Thu, 24 May 2012 16:06:12 +0000 (17:06 +0100)]
opkg-nogpg: add file path
There was no explicit path in FILESPATH for this recipe to allow it to
find files referred to in SRC_URI (files shared with the standard opkg
recipe). This problem may have been masked by the fetcher behaviour of
looking for files last in DL_DIR, thus if opkg has been fetched
beforehand there would have been no error.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Mihai Lindner [Sun, 20 May 2012 13:17:32 +0000 (13:17 +0000)]
sudo: fixed wrong `chmod` path
Placed $D between braces ${D} to be correctly expanded to the
workdir path, instead of a path relative to host rootfs.
Currently, bitbake sudo fails on host systems where sudo is not
installed.
Signed-off-by: Mihai Lindner <mihaix.lindner@linux.intel.com>
Richard Purdie [Thu, 24 May 2012 10:02:53 +0000 (11:02 +0100)]
bitbake.conf: Improve wget timeouts
The wget default is a 900 second timeout and 20 retries. This is way too long
for most of our usecases so this patch changes it to a 30 second timeout and
reduces retries from 5 to 2. We have good mirror infrastructure, this will
let us fall back to it easier.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Saul Wold [Tue, 22 May 2012 22:24:13 +0000 (15:24 -0700)]
qemu: disable vnc-jpeg compression
This is disabled by default to ensure a deterministic build, qemu
configure would sometimes detect the libjpeg and then enable this.
Since mostly qemu is used locally disable by default.
Saul Wold [Fri, 11 May 2012 17:13:06 +0000 (10:13 -0700)]
qemu.inc: Remove mesa-xlib as PREFERRED_PROVIDER
The xserver-xorg uses and depends on mesa-dri, so we should
use the default PREFERRED_PROVIDER of libgl as mesa-dri.
This resolves the following:
ERROR: Multiple .bb files are due to be built which each provide virtual/libgl (/intel/poky/distro/meta/recipes-graphics/mesa/mesa-dri_7.11.bb /intel/poky/distro/meta/recipes-graphics/mesa/mesa-xlib_7.11.bb).
This usually means one provides something the other doesn't and should.
Khem Raj [Tue, 1 May 2012 05:01:24 +0000 (22:01 -0700)]
qemumachines: Enable xserver-xorg as default xserver
For qemux86 and qemux86-64 include qemu.inc after defining XSERVER
XSERVER variable is also weakly defined in task-core-x11.bb
which means we can not use ??= otherwise when building any qemu image
that uses task-core-x11.bb will get the wrong definition
So we define the XSERVER common set for qemu in qemu.inc
and as we know x86 and x86-64 qemu overrides the default
we include qemu.inc after that definition which means that
qemux86 and qemux86-64 get their own definitions and other
qemus get the definitions from qemu.inc. other non-qemu machine
will get their defintion from task which points to kdrive
as of now.
Samuel Stirtzel [Wed, 23 May 2012 13:46:28 +0000 (15:46 +0200)]
valgrind: Enable valgrind for armv7
Valgrind supports the armv7 architecture, this patch allows armv7 users to build and use Valgrind
This patch was run-tested on a Gumstix Overo (armv7a cortex-a8)
* The test consisted of running valgrinds memcheck (memory leakage detection),
* and callgrind (profiling) on a Qt 4 application
Signed-off-by: Samuel Stirtzel <s.stirtzel@googlemail.com>
