When do ipv6 ready test, some DAD (duplicate address detect) tests failed
since it expect IPV6 will be disabled, but not. even accept_dad has been
set to correct value 2. Further investigation shows the root cause is that
setting the kernel parameter happens after the NIC is upped.
Make kernel parameters be configured before the interfaces is upped, and
duplicate setting the kernel parameters does not have negative effect.
Paul Eggleton [Tue, 2 Jul 2013 13:46:48 +0000 (14:46 +0100)]
ghostscript: fix patch failure with some versions of patch
Some versions of patch (e.g. 2.6.1.136-31a7 on OpenSUSE 12.2) will
refuse to patch a file via a symlink (probably a fairly sensible
security precaution). The "base/" subdirectory specified within the
ghostscript-9.05-NOT-check-endian.patch file was being lost by the
default application with -p1, but this was not caught on most systems
due to the symlink. Fix the path so that we always patch the file
directly.
Fixes [YOCTO #4773].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Paul Eggleton [Tue, 2 Jul 2013 12:19:10 +0000 (13:19 +0100)]
classes/package: print command output when commands fail
When external commands such as debugedit fail, it can be useful to see
their output, so use oe.utils.getstatusoutput() instead of
subprocess.call() to capture this and print it on failure.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Saul Wold [Fri, 28 Jun 2013 18:46:03 +0000 (11:46 -0700)]
security_flags: Add the compiler and linker flags that enhance security
These flags add addition checks at compile, link and runtime to prevent
stack smashing, checking for buffer overflows, and link at program start
to prevent call spoofing later.
This needs to be explicitly enabled by adding the following line to your
local.conf:
Jonathan Liu [Sat, 15 Jun 2013 00:06:31 +0000 (10:06 +1000)]
qt4e.bbclass: export OE_QMAKE_QT_CONFIG
The class is inheriting qmake2.bbclass which exports OE_QMAKE_QT_CONFIG
pointing to the qt4 qconfig.pri when it should be pointing to the
qt4-embedded qconfig.pri.
Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Note that this alone is not enough to fix the TmuxRunning devshell when
using pseudo because tmux does not preserve the environment that pseudo
requires.
Signed-off-by: Tyler Hall <tylerwhall@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Tyler Hall [Sun, 30 Jun 2013 20:16:19 +0000 (16:16 -0400)]
terminal: Run command using a wrapper script
Some terminals may not pass the environment into the child process. This
is true when using "tmux split-window." If tmux is already running, it
will start the command with the tmux session environment, ignoring the
environment where the command was issued.
This could possibly be worked around when launching tmux by injecting
variables into the user's session environment or adding the variables to
the "update-environment" tmux setting. However, both methods would
permanently alter the user's session, which is undesirable.
By using a wrapper script, we have full control over the final
environment. Replace the env dictionary with an empty data smart that
will contain the exported variables and a wrapper function that execs
the original command.
Signed-off-by: Tyler Hall <tylerwhall@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Paul Eggleton [Fri, 28 Jun 2013 16:09:46 +0000 (17:09 +0100)]
lib/oe/lsb.py: fall back to /etc/os-release for host distro ID
The new standard for host distribution identification [1] is
/etc/os-release, and a number of newer distributions provide this file,
so add support for this in order to pick up more distributions.
Additionally, handle "rolling release" style distributions that don't
report a version number, e.g. Arch Linux.
With this change we can identify the most common distributions, so this
should satisfy [YOCTO #4271]. Note that this doesn't imply support for
these distros as build hosts, just that we can identify them.
Chen Qi [Fri, 28 Jun 2013 07:48:22 +0000 (15:48 +0800)]
udev-cache: take a read-only rootfs into consideration
In case of a read-only rootfs, we skip the process of generating
udev cache, as the data cannot be persisted between reboots.
However, it's possbile that the $DEVCACHE (default to /etc/dev.tar)
exists in a read-only rootfs, no matter how it's generated or installed.
In such situation, we try to use $DEVCACHE if possible.
Besides the basic changes in the logic of udev cache handling,
this patch also adds code to output more information if the udev
cache is not used and VERBOSE enabled.
This patch also changes the readfile function to readfiles function
so that it could handle more than one file at once.
Ionut Radu [Thu, 27 Jun 2013 10:22:38 +0000 (13:22 +0300)]
gpgme: Updated from 1.4.1 to 1.4.2
Signed-off-by: Ionut Radu <ionutx.radu@intel.com>
License md5 was changed for src/gpgme.h.in:
"File: @configure_input@ */" was replaced by "Generated from gpgme.h.in for @GPGME_CONFIG_HOST@. */"
Ionut Radu [Wed, 26 Jun 2013 13:59:44 +0000 (16:59 +0300)]
libxext: Update from 1.3.1 to 1.3.2
Signed-off-by: Ionut Radu <ionutx.radu@intel.com>
Line "Copyright (c) 1999, 2005, 2006, Oracle and/or its affiliates. All rights reserved."
in COPYING was changed into "Copyright (c) 1999, 2005, 2006, 2013, Oracle and/or its affiliates. All rights reserved."
in 1.3.2
Paul Eggleton [Wed, 19 Jun 2013 17:01:31 +0000 (18:01 +0100)]
buildtools-tarball: add python-git
python-git is needed by buildhistory-diff and the OE layer index update
script, and on machines where buildtools-tarball is necessary given we
are providing python we must provide this module as well.
Fixes [YOCTO #4747].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Paul Eggleton [Fri, 28 Jun 2013 15:10:25 +0000 (16:10 +0100)]
classes/insane: remove la2 check which no longer exists from ERROR_QA
This check was actually removed a very long time ago in 6656381714c5956f71ca634f5a5f4aa4661bbf7e, before we even changed the QA
checks to use names instead of numbers - the name was probably added
ERROR_QA mistakenly because it hadn't also been removed from the comment
listing the QA checks or the function that determined which ones were
errors.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Kai Kang [Fri, 28 Jun 2013 07:48:47 +0000 (15:48 +0800)]
Disable build qt related packagegroups on mips64 with 64 bits userspace
Because qt could not be built on mips64 with 64 bits userspace, set
COMPATIBLE_HOST for qt related packagegroups to disable them on mips64
with 64 bit userspace too.
Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As python-multiprocessing requires python-threading and
python-pickle, this commit adds them as runtime dependency.
The observed behavior was:
When typing 'import multiprocessing' in the python shell on a
minimal image with only the python-multiprocessing recipe installed,
python reports at first:
Python 2.7.3 (default, Jun 27 2013, 08:26:25)
[GCC 4.7.2] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import multiprocessing;
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib/python2.7/multiprocessing/__init__.py", line 65, in <module>
from multiprocessing.util import SUBDEBUG, SUBWARNING
File "/usr/lib/python2.7/multiprocessing/util.py", line 38, in <module>
import threading # we want threading to install it's
ImportError: No module named threading
After adding python-threading as runtime dependency and rebuilding
the image, python reports:
Python 2.7.3 (default, Jun 27 2013, 08:26:25)
[GCC 4.7.2] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import multiprocessing;
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib/python2.7/multiprocessing/__init__.py", line 84, in <module>
import _multiprocessing
ImportError: No module named cPickle
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@oss.bmw-carit.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Lukas Bulwahn [Fri, 28 Jun 2013 09:57:11 +0000 (11:57 +0200)]
python-argparse: adding runtime dependency on python-codecs
When typing 'import argparse' in the python shell on a minimal image
with only the python-argparse recipe installed, python reports:
Python 2.7.3 (default, Jun 27 2013, 08:26:25)
[GCC 4.7.2] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import argparse;
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib/python2.7/site-packages/argparse.py", line 91, in <module>
from gettext import gettext as _
ImportError: No module named gettext
The python-argparse recipe requires the python gettext module,
which is currently provided by python-codecs.
Hence, this commit adds python-codecs as runtime dependency to
resolve the issue.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@oss.bmw-carit.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Chen Qi [Fri, 28 Jun 2013 07:48:53 +0000 (15:48 +0800)]
init-live.sh: try to make a union mount when possible
This patch tries to make a union mount in live image. For example,
if aufs is enabled with the aufs-enable.scc configuration fragment,
the init-live.sh script will use aufs to make a union mount.
Although overlayfs is not supported by Yocto kernel yet, this patch
still takes it into consideration with the expect that the related
code should at least serve as a placeholder.
[YOCTO #1487]
[YOCTO #4761]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Kai Kang [Fri, 28 Jun 2013 07:48:46 +0000 (15:48 +0800)]
qt4*.bbclass: disable build qt on mips64 with 64 bits userspace
Qt/qt-embedded build fails on mips64 with 64 bits userspace. Set
COMPATIBLE_HOST in qt4e.bbclass and qt4x11.bbclass to disable build
qt/qt-embedded and packages which inherit these two classes on mips64
with 64 bits userspace.
Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 28 Jun 2013 08:30:59 +0000 (08:30 +0000)]
packagedata: Show error when trying to change PE/PV/PR from runtime/pkgdata
PN/PE/PV/PR should never change between do_package and the following do_package_write_*
tasks. If any do change you would see build failure due to the wrong WORKDIR being
used for example.
This patch ensures that if something is going wrong we see the error earlier and
with some better warning about what the real problem is.
[YOCTO #4102 partial]
This is a rewritten version of a patch from Martin Jansa <martin.jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 30 May 2013 12:28:05 +0000 (12:28 +0000)]
package: Ensure we iterate all the pool objects
There is the possibility that if we don't iterate through the multiprocessing
pool objects we might not catch return codes and this could lead to hung/zombie
processes either temproarily or on a wider scale. Adding this certainly doesn't
hurt anything and is better practise so we might as well do it.
Its not 100% clear if this fixes some issues or not.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mark Hatle [Thu, 27 Jun 2013 14:08:33 +0000 (09:08 -0500)]
sanity.bbclass: Check for the known broken version of make
See GNU Savannah bug 30612 -- make 3.82 is known to be broken.
A number of vendors are providing a modified version, so checking
for just the version string is not enough. We also need to check
if the patch for the issue has been applied. We use a modified
version of the reproduced to check for the issue.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Saul Wold [Tue, 25 Jun 2013 22:14:48 +0000 (15:14 -0700)]
systemd: Ensure that we mount devtmpfs
Since systemd also used tmpfs we should make a similar patch for
the systemd-udev script
Fix for bug: https://bugzilla.yoctoproject.org/show_bug.cgi?id=4632
Since udev 172, the 'mknod' logic was removed from udev. Yocto Dylan
is now using udev 182. This means /dev is now required to be a
devtmpfs filesystem (maintained by the kernel). If the root
filesystem is a ramdisk, the kernel's auto-mount of /dev doesn't
activate since there is no rootfs to actually mount... The bug causes
an unusable system as /dev doesn't contain even basic nodes required
to even get a login prompt.
The Yocto udev/init script mounts tmpfs if it does not detect tmpfs
or devtmpfs mounted at /dev. This appears to be outdated logic that
is no longer correct. I believe the Yocto udev init script should be
checking and mounting only 'devtmpfs' on dev.
Signed-off-by: Alex Olson <alex.olson+yocto@gmail.com>
[YOCTO #4632]
Mikhail Durnev [Wed, 26 Jun 2013 02:54:36 +0000 (21:54 -0500)]
useradd.bbclass: Add members to a group
useradd.bbclass supports adding new users and new groups. But it does not
support adding existing users to existing groups.
There is a need of adding users to some groups (e.g. audio). The class was
extended to call groupmems utility with arguments passed via GROUPMEMS_PARAM.
Mikhail Durnev [Wed, 26 Jun 2013 02:54:35 +0000 (21:54 -0500)]
shadow-native: Add --root option in groupmems
Patch add_root_cmd_groupmems.patch that we apply to shadow-native
allows program groupmems from the shadow utility package to chroot()
so it can be used to modify etc/passwd and etc/group if they are
located in a sysroot.
The --root option in groupmems is needed for class useradd.
Hongxu Jia [Wed, 26 Jun 2013 04:38:47 +0000 (12:38 +0800)]
adt_installer_internal:fix perl lib version mismatch
When run "autoreconf" in toolchain, there is an error if the host's perl's
version is not the same as the one in the SDK, the error says that the
executable perl mismatches the perl lib's version.
This is because most of the autotools' scripts use the "#!/usr/bin/perl -w"
which is host perl, but the gnu-configize uses "#! /usr/bin/env perl" which
invokes the perl wrapper in the SDK, and the wrapper will set the PERL5LIB to
the SDK which causes the mismatch. We can make all the perl scripts to use the
host perl or the SDK perl to fix this problem.
Hongxu Jia [Wed, 26 Jun 2013 04:38:46 +0000 (12:38 +0800)]
adt_installer_internal: fix perl modules relocated failed on older distributions
The perl module for automake has an embedded path in it, this needs
to be relocated.
Older versions of 'file' do not return the "ASCII" text in the output for
a perl module file. Hence, the regex pattern didn't match perl module and
they were not getting relocated at all on older distributions.
1) On CentOS release 6.4, the version of file is 5.04
$ file /usr/lib/perl5/Config_heavy.pl
$ /usr/lib/perl5/Config_heavy.pl: Perl5 module source text
2) On Ubuntu 13.04, the version of file is 5.11
$ file /usr/lib/perl/5.14/Config_heavy.pl
$ /usr/lib/perl/5.14/Config_heavy.pl: C source, ASCII text, with very long lines
Enrico Scholz [Wed, 26 Jun 2013 12:10:25 +0000 (14:10 +0200)]
image_types.bbclass: set 'filetype' ext4 feature
Generating filesystems with this flag allows more efficient directory
traversals because getdents() returns the filetype in 'd_type' which
allows to avoid an extra lstat() call.
Creating ext4 filesystems with 'mkfs.ext4' sets this flag by default
too.
Martin Jansa [Wed, 26 Jun 2013 17:19:32 +0000 (19:19 +0200)]
boost: Limit PARALLEL_MAKE by -j 64
* greater paralelism isn't supported by bjam and causes segfault or ignoring -j
* PARALLEL_MAKE was enabled for boost in
http://git.openembedded.org/openembedded-core/commit/?id=9b9cfc1dfe5e3b8f89b7a8508537166d0f23935e
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Bruce Ashfield [Tue, 25 Jun 2013 20:39:46 +0000 (16:39 -0400)]
linux-yocto/3.8: add USB screen configuration and net sched options
Bumping the meta branch SRCREV for the followiong commits:
meta: enable additional NET_SCHED options
This change turns on NET_ACT_MIRRED (packet redirecting and mirroring)
and NET_CLS_U32 (universal 32bit comparisons w/ hashing classification).
Signed-off-by: Michael Barabanov <michael.barabanov@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
meta: add BSP-specific touchscreen support
Add touchscreen-composite support to machines based on common-pc and
common-pc-64, along with several other Atom boards that don't inherit
from those, thus providing those machines with the out-of-the-box
ability to make use of the set of USB touchscreen devices supported by
the composite USB driver.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
meta: add usb/touchscreen-composite feature
Add support for the 'composite' USB touchscreen driver.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
meta: add features/input/touchscreen
Add a feature enabling basic support for touchscreen input devices.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Michael Barabanov <michael.barabanov@windriver.com> Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Bruce Ashfield [Tue, 25 Jun 2013 20:17:10 +0000 (16:17 -0400)]
linux-yocto/3.4: allow kernel feature _appends to be overriden
Updating the linux-yocto 3.4 recipe's feature flags to match the 3.8
recipe, which has the following change:
It was pointed out that the current way the KERNEL_FEATURES variable
is appended in the base linux-yocto recipe doesn't allow the appended
features to be prevented in a layer without using python code and
a recipe finalize hook.
To allow easier overriding of 'extra' or 'optional' features that are
defined in the linux-yocto recipe, we create a KERNEL_EXTRA_FEATURES
variable. This variable can be set in a layer to define extra features
or cleared to prevent the recipe's extra features from being appended
to the core functionality.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Alex Olson [Tue, 25 Jun 2013 20:10:48 +0000 (15:10 -0500)]
udev: only use devtmpfs for udev
Fix for bug: https://bugzilla.yoctoproject.org/show_bug.cgi?id=4632
Since udev 172, the 'mknod' logic was removed from udev. Yocto Dylan
is now using udev 182. This means /dev is now required to be a
devtmpfs filesystem (maintained by the kernel). If the root
filesystem is a ramdisk, the kernel's auto-mount of /dev doesn't
activate since there is no rootfs to actually mount... The bug causes
an unusable system as /dev doesn't contain even basic nodes required
to even get a login prompt.
The Yocto udev/init script mounts tmpfs if it does not detect tmpfs
or devtmpfs mounted at /dev. This appears to be outdated logic that
is no longer correct. I believe the Yocto udev init script should be
checking and mounting only 'devtmpfs' on dev.
Signed-off-by: Alex Olson <alex.olson+yocto@gmail.com>
[YOCTO #4632]
Otavio Salvador [Tue, 25 Jun 2013 17:56:27 +0000 (14:56 -0300)]
alsa-tools: Pass ACLOCAL_FLAGS so aclocal uses the right params
The compile step ends regenerating the configure scripts included in
the source subdirs, for it to properly work we need to pass the
ACLOCAL_FLAGS or the .m4 files won't be found.
,----[ Build error ]
| ./ac3dec
| aclocal: warning: autoconf input should be named 'configure.ac', not 'configure.in'
| configure.in:18: warning: macro 'AM_PATH_ALSA' not found in library
| automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
| configure.in:9: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see:
| configure.in:9: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_INIT_AUTOMAKE-invocation
| automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
| test/Makefile.am:1: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS')
| configure.in:18: error: possibly undefined macro: AM_PATH_ALSA
| If this token and others are legitimate, please use m4_pattern_allow.
| See the Autoconf documentation.
| make: *** [all] Error 1
| ERROR: oe_runmake failed
`----
Jonathan Liu [Thu, 20 Jun 2013 01:54:56 +0000 (11:54 +1000)]
libx11: enable Xcms by default
The following do not work if Xcms is not enabled in libx11:
- starting xterm and doing ls --color / fails to color code the
directories:
xterm: Cannot allocate color "rgb:5c/5c/ff"
- xsetroot -solid rgb:5c/5c/ff fails with the following error:
xsetroot: unknown color "rgb:5c/5c/ff"
- xsetroot -solid rgbi:1.0/1.0/1.0 fails with the following error:
xsetroot: unknown color "rgbi:1.0/1.0/1.0"
More specifically, applications that pass Xcms color names to
XParseColor do not work properly.
[YOCTO #4576]
Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Hongxu Jia [Tue, 18 Jun 2013 12:14:14 +0000 (20:14 +0800)]
init-live.sh: fix automount failed occasionally
Reboot system repeatedly, occasionally found usb automount failed, a
low probability but it happens.
$ df
Filesystem 1K-blocks Used Available Use% Mounted on
none 1024972 4 1024968 0% /dev
/dev/sda3 768938435409403757840 49% /media/sda3
/dev/sda2 1461274241238432137466120 1% /media/sda2
/dev/sda1 17845 14570 2354 86% /media/sda1
/dev/sdb 293400 288560 4840 98% /media/sdb
/dev/sdc4 457632 32 457600 0% /media/sdc4
/dev/sdc1 475018 2321 447749 1% /media/sdc1
/dev/sdd 13822981382298 0 100% /media/sdd
/dev/sdc2 475694 2320 448374 1% /media/sdc2
/dev/loop0 270649 181249 75644 71% /
df: /media/sdc3: No such file or directory
tmpfs 1029352 0 1029352 0% /dev/shm
tmpfs 1029352 2816 1026536 0% /run
tmpfs 1029352 0 1029352 0% /sys/fs/cgroup
tmpfs 1029352 4 1029348 0% /tmp
tmpfs 1029352 0 1029352 0% /media/ram
tmpfs 1029352 116 1029236 0% /var/volatile
When boot media has been found, udev will be killed. If udev is busy
to mount other medias at the killing time (especially medias is many),
the above issue will occur occasionally.
Invoke `udevadm settle' before killing udev will resolve this
issue, it watches the udev event queue, and exits if all current
events are handled.
Use variable `_UDEV_DAEMON' to replace hardcoded `udevd' to keep
consistent with previous.
Richard Purdie [Tue, 25 Jun 2013 17:08:01 +0000 (18:08 +0100)]
sanity.bbclass: Add check for @ character in build directory name
The @ character is not escaped properly in too many places within the system
to easily support it so add the character to the list of blacklisted characters.
Also tweak the other messages and ensure that all appropriate error messages
are disabled in one go.
[YOCTO #4772]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Laurentiu Palcu [Tue, 25 Jun 2013 11:59:05 +0000 (14:59 +0300)]
populate_sdk_base, adt_installer: abort install if path contains spaces
Spaces are not handled properly in some parts of oe-core and it's safer
to abort toolchain installation if path contains spaces. Even though
we fix space handling in the toolchain installation script, there are
various other parts in the toolchain (perl scripts, sysroot path passed to
toolchain binaries, shebang lines) that would need special handling. So,
for now, just bail out if path contains spaces.
The checking for spaces in the path is done after expanding relative
paths to absolute and tilde conversion.
[YOCTO #4488]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mark Hatle [Mon, 24 Jun 2013 14:45:49 +0000 (09:45 -0500)]
buildtools-tarball: Add nativesdk-make
Recently it was discovered that many Fedora hosts have a broken version of
make 3.82. Add make to the buildtools-tarball, as well ad modify make to
support building a special nativesdk version.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Mark Hatle [Mon, 24 Jun 2013 14:45:48 +0000 (09:45 -0500)]
make: Fix second part of bug Savannah 30612
The Savannah bug 30612 describes two different issue. The first,
previously fixed, errors parsing multiple objects in parenthesis.
The second, (this issue), extra white space contained in the
parenthesis.
Mark Hatle [Mon, 24 Jun 2013 14:47:15 +0000 (09:47 -0500)]
buildtools-tarball: Change the way the SDK is sanitized
The previous method of shrinking down the scale of the environment-setup
file would not work properly when the target is configured with multilibs.
In addition, the configured machine name and similar settings could leak
into the SDK naming. This was resolved by clearing the SDK generated
files and generating our own custom files.
Note, the name of the environment-setup now is suffixed with the SDK_SYS.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Mark Hatle [Mon, 24 Jun 2013 14:44:30 +0000 (09:44 -0500)]
gcc: When cross compiling a target gcc, target flags may be used on the host
The original fix worked some of the time, but not on all machines. Fix
this by applying the change in a different way. Following the example of
the existing BUILD_CFLAGS.
Below is the commit message from the original change to help explain why
this is needed:
Configure identifies a number of warning flags (WARN_CFLAGS and
WARN_CXXFLAGS) from the $CC value. The cross compiler may be different
from the host compiler and may not support the same set of flags. This
leads to problems such as:
cc1plus: error: unrecognized command line option "-Wno-narrowing"
cc1plus: error: unrecognized command line option "-Wno-overlength-strings"
Work around this problem by removing the warning flags from the
BUILD_CXXFLAGS value, in a way similar to the BUILD_CFLAGS.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Björn Stenberg [Mon, 24 Jun 2013 07:45:52 +0000 (09:45 +0200)]
bash ptest: Sed away the Makefile dependency to remove error messages.
The bash Makefile defines a dependency on itself and tries to run configure,
causing error messages when running ptest on target:
make: *** No rule to make target `configure.in', needed by `configure'.
make: *** No rule to make target `aclocal.m4', needed by `configure'.
make: *** No rule to make target `config.h.in', needed by `configure'.
make: *** No rule to make target `Makefile.in', needed by `Makefile'.
make: Failed to remake makefile `Makefile'.
This patch edits out this dependency in the Makefile installed for ptest,
to get rid of these messages.
Signed-off-by: Sona Sarmadi <sona.sarmadi@enea.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Roy.Li [Mon, 24 Jun 2013 05:08:03 +0000 (13:08 +0800)]
qt-mobility: remove /usr/lib from ld rpath-link option
Remove /usr/lib from ld rpath-link option to fix the below build error:
bitbake_build/tmp/sysroots/x86-kvm-guest/usr/lib/libpng16.so.16:
undefined reference to `inflateReset2@ZLIB_1.2.3.4'
since sysroot seems not work for rpath-link, and "rpath-link,/usr/lib" makes
ld to search host libraries for target libraries, once host has different
version zlib, the error will happen.
qmake uses QT_MOBILITY_LIB to generate "rpath-link,/usr/lib" when do_configure
but we can not add sysroot into QT_MOBILITY_LIB, since QT_MOBILITY_LIB is dir
which libraries will be installed to, so I remove this dir from rpath-link
before do_compile
Khem Raj [Mon, 24 Jun 2013 03:10:05 +0000 (20:10 -0700)]
libbsd: Add recipes for libbsd - utility functions from BSD systems
When building BSD programs this library provides common
BSD functions that are missing on other OSes e.g. Linux
This library is elemental for porting large set of BSD applications
current consumer of this are in meta-networking/openbsd-netcat
but once we have it in OE-Core more recipes depending on it in different layers
can be added.
