gcc-4.6: Specify complete paths in require directive
This is needed for adjusting meta-linaro where linaro
gcc recipes leverage the core recipe infrastructure and
modifies minimal to keep compatibility with OE-Core
so that any changes in OE-Core gcc recipes does not
trigger changes in meta-linaro.
this option by default points to /usr/local no matter
what so we cant let it sit on sidelines otherwise it
will access host machine's /usr/local which may not
be desired. So disable this option. This also helps in making
gcc's shared state more consistent
Khem Raj [Fri, 24 Feb 2012 03:07:46 +0000 (19:07 -0800)]
gcc: Stash the gcc-cross builddir to reuse in libgcc and gcc-runtime
Currently we stash the libgcc install tree and then reuse that
to populate libgcc recipe later. This mechanism does not work
for gcc 4.7/trunk since now libstdc++ needs access to build tree
of libgcc. This patch stashes the gcc-cross build tree
and then reuses this in libgcc as well as in gcc-runtime
recipe builds.
Now we build libgcc in the libgcc recipe instead of just
using the prebuilt install tree
core-image-minimal build/run tested on all qemu machines
Khem Raj [Wed, 28 Mar 2012 14:22:44 +0000 (07:22 -0700)]
gcc-configure: Pass distinct target flags
When building gcc-cross-canadian libgcc is built using
headers from gcc-crosssdk and not the target sysroot
because we do not pass proper CFLAGS for target bits
so it ends up using CFLAGS that were meant for compiling
canadian gcc itself. It does not show up as a problem
when building SDK with eglibc because eglibc-nativesdk
and eglibc have identical headers. The problem shows
up clearly when you try to build uclibc based meta-toolchain
since then nativesdk libc and target libc are different
Khem Raj [Thu, 22 Mar 2012 22:51:29 +0000 (15:51 -0700)]
tcmode-default: Use SDKGCCVERSION ?= "${GCCVERSION}"
Usually they should be same if not defined to be different
by user. In this case if I override GCCVERSION in local.conf
then SDKGCCVERSION will also follow the suite.
Richard Purdie [Sat, 11 Feb 2012 02:58:28 +0000 (18:58 -0800)]
classes: Add recipe class to overrides
We have currently no override to detect a recipe being build cross, crosssdk
or for target at times we can use virtclass-native and virtclass-nativesdk to
override stuff in recipes but we dont have way to modify a variables
based on recipe type always.
This patch adds in such an override and in particular makes a target override
class available.
Martin Jansa [Fri, 23 Mar 2012 22:30:40 +0000 (22:30 +0000)]
bitbake.conf: use TUNE_PKGARCH instead of TARGET_ARCH in SDK_NAME
* also use weak assignment for SDK_NAME_PREFIX as suggested by khem
* TUNE_PKGARCH is not 100% right too, because such SDK image usually has few
machine specific packages included (e.g. base-files, securetty, opkg configs)
but those are not important for SDK users so it's better to have one SDK for
whole e.g. armv7a-vfp-neon then 6 SDK for each machine which would work the
same.
You can see diff between crespo and om-gta04 SDK here:
http://build.shr-project.org/shr-core/sdk/oecore-i686-armv7a-vfp-neon-toolchain-efl-crespo-om-gta04.diff
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* The location where xev was located didn't contain xorg-app-common.inc,
but still xev requires it. So moving it fixes that issue.
* File checksums and License checksums were also added.
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
While building on distros like fedora17, which has /bin/perl,
the target perl scripts get perl path also as /bin/perl.
And that is not correction path of perl on the target.
This commit avoids this error.
| error: Failed dependencies:
| /bin/perl is needed by quilt-0.51-r2.i586
NOTE: package core-image-sato-sdk-1.0-r0: task do_rootfs: Failed
ERROR: Task 8
(/home/nitin/prj/poky.git/meta/recipes-sato/images/core-image-sato-sdk.bb,
do_rootfs) failed with exit code '1'
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Mark Norman [Wed, 25 Apr 2012 10:44:20 +0000 (20:14 +0930)]
uclibc SDK not including libpthread_nonshared.a
Modified the uclibc PACKAGES list order to ensure the uclibc-dev package is
processed before uclibc-staticdev to allow *_nonshared.a libraries to be
packaged in the uclibc-dev package. The *_nonshared.a libraries are required
by the SDK.
Scott Garman [Wed, 25 Apr 2012 05:13:12 +0000 (22:13 -0700)]
libpng: upgrade to 1.2.49
License hasn't changed, just updated the md5 checksums due to trivial
date changes within the text (and the position of the license text
within png.h).
Addresses CVE-2011-3045
Fixes [YOCTO #2352]
Signed-off-by: Scott Garman <scott.a.garman@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Andrei Gherzan [Thu, 5 Apr 2012 20:54:24 +0000 (23:54 +0300)]
python: Add patch to avoid warning about _tkinter
_tkinter module needs tk module along with tcl. tk is not yet integrated
in yocto so we skip the check for this module.
Avoid a warning by not adding this module to missing variable.
[YOCTO #1937]
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Andrei Gherzan [Thu, 5 Apr 2012 20:54:22 +0000 (23:54 +0300)]
python: Add patch to search for db.h in inc_dirs and remove warning
python should search for db.h in inc_dirs and not in a hardcoded path.
If db.h is found but HASHVERSION is not 2 we avoid a warning by not.
adding this module to missing variable.
[YOCTO #1937]
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Andrei Gherzan [Thu, 5 Apr 2012 20:54:21 +0000 (23:54 +0300)]
python: Add patch for 64bit platform
This patch was added for 64bit host machines. In the compile process python
is checking if platform is a 64bit platform using sys.maxint which is the host's
value. The patch fixes this issue so that python would check if TARGET machine
is 64bit not the HOST machine. In this way will have "dl" and "imageop" modules
built if HOST machine is 64bit but the target machine is 32bit.
[YOCTO #1937]
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
{kernel, module}.bbclass: don't run depmod for module packages during do_rootfs
* depmod already gets executed by pkg_postinst_kernel-image.
* If you build a module using module.bbclass, pkg_postinst returns 1 in
do_rootfs, causing pkg_postinst to run again on first boot. To improve
this situation, I copied pkg_postinst from kernel.bbclass to module.bbclass.
This was rejected by Koen, because he doesn't like the code from
kernel.bblcass, which uses ${STAGING_DIR_KERNEL}. Richard then suggested
that calling depmod during do_rootfs wasn't necessary at all, because
it already gets done by kernel-image.
Signed-off-by: Andreas Oberritter <obi@opendreambox.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Thu, 29 Mar 2012 14:08:55 +0000 (16:08 +0200)]
kernel.bbclass: unify white spaces
* indentation was with spaces and tabs, unify to use tabs instead of
spaces, for shell code and populate_packages_preppend,
because "python populate_packages" expects tabs (or 8 spaces)
* and use 4 spaces for anonymous python
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 19 Apr 2012 21:52:10 +0000 (21:52 +0000)]
utils.bbclass: Testing via env in create_wrapper is a nice idea but breaks things
For example, pseudo-native wants to set LD_LIBRBARY_PATH but setting this
into the environment here causes the existing pseudo (running during do_install)
to poke into paths in /opt and this breaks builds.
The simplest fix is simply not to do this. Comments tweaks to match the code.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Tue, 24 Apr 2012 09:25:25 +0000 (10:25 +0100)]
dpkg-native: fix deb-based rootfs construction failure on Fedora 16
Backport a fix from 1.16.x upstream to use fd instead of stream-based
I/O in dpkg-deb, which avoids the use of fflush() on an input stream
(the behaviour of which is undefined by POSIX, and appears to have
changed in the version of glibc introduced in Fedora 16 and presumably
other systems).
Fixes [YOCTO #1858].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bootimg.bbclass: Tweak iso images to become hybrid images
This allows iso images to be written to usb keys and booted on systems which
have a BIOS which support this. There is no real down side to tweaking the iso
images in this way.
[YOCTO #1763 partial]
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove /etc since it is empty, when creating a machine that does not
deliver any module config files, the /etc is empty and is then warned
about not being shipped, so we remove it.
This occurs in the routerstationpro with the following warning:
WARNING: For recipe linux-yocto, the following files/directories were installed but not shipped in any package:
WARNING: /etc
patch.bbclass orignally pointed at /usr/bin/quiltrc for an empty
version to ensure that no user setting were picked up, change this
to /etc/quiltrc in the Native sysroot since we now have a native
sysconfdir.
Make sure that the quiltrc is actually installed in the Native
sysconfdir, not the target, so fix this after the recipe split.
gcc: Add plugins package for ARM, fix /usr/incude packaging
WARNING: For recipe gcc, the following files/directories were installed but not shipped in any package:
WARNING: /usr/include
WARNING: /usr/lib/gcc/arm-poky-linux-gnueabi/4.6.4/plugin/libgcc
WARNING: /usr/lib/gcc/arm-poky-linux-gnueabi/4.6.4/plugin/libgcc/config
WARNING: /usr/lib/gcc/arm-poky-linux-gnueabi/4.6.4/plugin/libgcc/config/arm
WARNING: /usr/lib/gcc/arm-poky-linux-gnueabi/4.6.4/plugin/libgcc/config/arm/bpabi-lib.h Signed-off-by: Saul Wold <sgw@linux.intel.com>
WARNING: For recipe xserver-kdrive, the following files/directories were installed but not shipped in any package:
WARNING: /usr/share/man
WARNING: /usr/share/man/man5
WARNING: /usr/share/man/man1
WARNING: /usr/share/man/man1/Xephyr.1
WARNING: /usr/share/man/man1/Xserver.1 Signed-off-by: Saul Wold <sgw@linux.intel.com>
WARNING: For recipe libgcc, the following files/directories were installed but not shipped in any package:
WARNING: /usr/lib/powerpc-poky-linux/4.6.4/ecrti.o
WARNING: /usr/lib/powerpc-poky-linux/4.6.4/ncrti.o
WARNING: /usr/lib/powerpc-poky-linux/4.6.4/ecrtn.o
WARNING: /usr/lib/powerpc-poky-linux/4.6.4/ncrtn.o Signed-off-by: Saul Wold <sgw@linux.intel.com>
WARNING: For recipe binutils, the following files/directories were installed but not shipped in any package:
WARNING: /usr/bin/embedspu Signed-off-by: Saul Wold <sgw@linux.intel.com>
Ken Werner [Thu, 19 Apr 2012 10:20:39 +0000 (12:20 +0200)]
bdwgc: Set ARM_INSTRUCTION_SET to "arm"
The bdwgc recipe uses a version of libatomic that fails when building in Thumb
mode. This has been fixed upstream already. The
pulseaudio/libatomics-ops_1.2.bb has the same issue and sets the
ARM_INSTRUCTION_SET to "arm" (probably until a new version gets pulled in).
This patch applies the same workaround to the bdwgc/bdwgc_20110107.bb recipe.
Robert Yang [Fri, 30 Mar 2012 01:44:47 +0000 (09:44 +0800)]
qt4-x11-free: enable -accessibility and -sm
Is it possible to enable the "-sm -accessibility" in oe-core, please?
There is a meta-kde layer which requires the "-sm -accessibility", but
they are disabled in meta/recipes-qt/qt4/qt4.inc:
QT_DISTRO_FLAGS ?= "-no-accessibility -no-sm"
I checked the log of the qt4, can't find the related log for
"-no-accessibility -no-sm".
Another way is use the bbappend, but it would be great if it can be
enabled in oe-core.
This only enables for qt4-x11, doesn't enable for qt4-embedded, and
have done testing on: qemux86, qemuarm, qemumips, qemuppc.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Mark Hatle [Mon, 16 Apr 2012 17:44:41 +0000 (12:44 -0500)]
console-tools: Use update-alternatives
Use update-alternatives and sync to the way the replace kbd package
does things. Using update-alternatives ensures that the proper provides
are setup in the packages.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
* defconfig, init.sh, wpa_supplicant-0.5.7-always-scan.patch,
wpa_supplicant-fix-deprecated-dbus-function.patch and
wpa_supplicant_default.conf are not used by the recipe.
* default-sane gets installed but is unused.
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
/home/kraj/work/angstrom/build/tmp-angstrom_2010_x-eglibc/sysroots/x86_64-linux/usr/libexec/armv5te-angstrom-linux-gnueabi/gcc/arm-angstrom-linux-gnueabi/4.6.3/ld:
error: hidden symbol '__start___debug' is not defined locally
/home/kraj/work/angstrom/build/tmp-angstrom_2010_x-eglibc/sysroots/x86_64-linux/usr/libexec/armv5te-angstrom-linux-gnueabi/gcc/arm-angstrom-linux-gnueabi/4.6.3/ld:
error: hidden symbol '__stop___debug' is not defined locally
collect2: ld returned 1 exit status
make[1]: *** [plugins/loopback.la] Error 1
Martin Donnelly [Tue, 10 Jan 2012 13:32:04 +0000 (13:32 +0000)]
augeas: Add libxml2 dependency
This patch fixes the following Augeas configure error.
| checking for LIBXML... no
| configure: error: Package requirements (libxml-2.0) were not met:
|
| No package 'libxml-2.0' found
|
| Consider adjusting the PKG_CONFIG_PATH environment variable if you
| installed software in a non-standard prefix.
|
| Alternatively, you may set the environment variables LIBXML_CFLAGS
| and LIBXML_LIBS to avoid the need to call pkg-config.
| See the pkg-config man page for more details.
| ERROR: oe_runconf failed
Signed-off-by: Martin Donnelly <martin.donnelly@ge.com>
Rebased these patches to the newer code:
automake/prefer-cpio-over-pax-for-ustar-archives.patch
automake/python-libdir.patch
Changed the tarball name from bz2 to gz, as the bz2 tar ball
is not published for the 1.11.3 version.
[RP: Fix python.m4 to preserve the tweaks that allow us to build python modules] Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Marko Katic [Fri, 16 Mar 2012 00:00:07 +0000 (01:00 +0100)]
xcb-util-render: Add recipe that provides libxcb-render-util
Xcb-util was split into separate packages in the 0.3.6 -> 0.3.8 transition.
This library was previously provided by xcb-util and is now a separate package.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Marko Katic [Fri, 16 Mar 2012 00:00:05 +0000 (01:00 +0100)]
xcb-util-image: Add recipe that provides libxcb-image.
Xcb-util was split into separate packages in the 0.3.6 -> 0.3.8 transition.
This library was previously provided by xcb-util and is now a separate package.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Marko Katic [Fri, 16 Mar 2012 00:00:06 +0000 (01:00 +0100)]
xcb-util-keysyms: Add recipe that provides libxcb-keysyms.
Xcb-util was split into separate packages in the 0.3.6 -> 0.3.8 transition.
This library was previously provided by xcb-util and is now a separate package.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Marko Katic [Fri, 16 Mar 2012 00:00:08 +0000 (01:00 +0100)]
xcb-util-wm: Add recipe that provides libxcb-icccm and libxcb-ewmh
Xcb-util was split into separate packages in the 0.3.6 -> 0.3.8 transition.
These libraries were previously provided by xcb-util and are now a separate package.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Marko Katic [Fri, 16 Mar 2012 00:00:04 +0000 (01:00 +0100)]
xcb_util.inc: Remove packaging and modify SRC_URI for multiple ${BPN} names
Xcb-util was split into separate packages during the 0.3.6 -> 0.3.8 transition.
Update xcb_util.inc to reflect that by removing the older packaging.
Libxcbatom, libxcbaux and libxcbevent are merged into libxcbutil.
Libxcbicccm, libxcbimage, libxcbkeysyms and libxcbwm are now separate packages.
Libxcbproperty and libxcbreply were made obsolete with this commit:
sanity.bbclass: add variable to disable the sanity checks
It's useful for Hob to be able to disable the sanity checks completely
without marking them as passed so that the user can get into the GUI to
configure their settings, etc.
Add a variable, DISABLE_SANITY_CHECKS, to do so.
Signed-off-by: Joshua Lock <josh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Mon, 23 Apr 2012 21:46:42 +0000 (22:46 +0100)]
python: Fix various contamination issues leading to broken/missing c modules
The move of libcrypto to /lib instead of /usr/lib has broken the _hashlib module
compilation. There were also a number of other failing modules which should
have been building correctly. This turned out partly to be the /lib issue
but also due to a number of native paths creeping into compiler commandlines.
These changes add in /lib as part of the searh directory and remove
a number of host contamination issues within setup.py. Post release we
should really further go through this file and just delete large sections
of it as its hard to be sure what strange paths python is injecting as
search paths.
This patch also fixes issues where re-execution of the compile task
would corrupt the Makefile in various ways, again leading to puzzling
paths within the configuration.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sun, 22 Apr 2012 14:47:30 +0000 (15:47 +0100)]
initramfs-live-boot: Disable unionfs until its issue with the system rootdir are resolved
There are issues with the current unionfs when making a union mount over "/".
Until these are resolved we can't use unionfs for live booting so disable this
temporarily as a workaround.
unionfs is usable in other circumstances.
[YOCTO #2331 workaround]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sun, 22 Apr 2012 14:46:17 +0000 (15:46 +0100)]
pseudo: Drop nativesdk wrapper and link against old memcpy symbol
The -nativesdk pseudo wrapper setting LD_LIBRARY_PATH turned out to be a
bad idea since it can mix up different libc and lib-dl verisons which
may or may not work depending on the phase of the moon.
As an alternative to solving the original problem, this patch drops the
symbol version requirement on memcpy which allows pseudo to work with
libc's back to 2.7 which should be sufficient for our supported targets
using nativesdk.
[YOCTO #2299]
[YOCTO #2351]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 19 Apr 2012 12:17:57 +0000 (13:17 +0100)]
package.bbclass: Ensure kernel modules get stripped
Kernel modules are not marked as executable but we do expect to strip them.
This patch adds in missing code to ensure we do this. Without this images
are getting sigificantly bloated in size.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 19 Apr 2012 07:48:25 +0000 (08:48 +0100)]
gettext.bbclass: Ensure we don't overwrite other DEPENDS_GETTEXT values
In particular, this overwrites the value from cross-canadian.bbclass in
some cases which isn't the desired behaviour and unnecessarily
complicates/breaks the dependency chain.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 19 Apr 2012 07:44:11 +0000 (08:44 +0100)]
qemu: Backport a patch to solve SSE2 instruction emulation issues
This fix addresses various issues seen in qemux86-64 images:
* scroll bars in matchbox-terminal not working
* files not appearing in pcmanfm
* warnings on the console from glib/gobject about invalid gdouble values
Its due to an emulation issue in qemu which the backported patch fixes.
I managed to debug it to a specific function, Khem found the qemu patch
to backport, thanks Khem!
[YOCTO #1906]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
packageinfo.bbclass: A workaround for RPM architecture renaming
For beagleboard platform, the PACKAGE_ARCH for certain recipes is
"armv7a-vfp-neon", however, the architecture label in RPM file name is
"armv7a" due to a potential bug in RPM backend.
This commit is a workaround to make Hob work in this case.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
