Bruce Ashfield [Sun, 3 May 2020 15:44:26 +0000 (11:44 -0400)]
linux-yocto/5.4: update to v5.4.28
Updating linux-yocto/5.4 to the latest korg -stable release that comprises
the following commits:
462afcd6e7ea Linux 5.4.28 7b2cdbd67ff0 staging: greybus: loopback_test: fix potential path truncations 8e79f440edb5 staging: greybus: loopback_test: fix potential path truncation 58ffe6b0245e drm/bridge: dw-hdmi: fix AVI frame colorimetry c965a0299c61 nvmet-tcp: set MSG_MORE only if we actually have more to send d3eb4daa333f arm64: smp: fix crash_smp_send_stop() behaviour 6080e0a9d107 arm64: smp: fix smp_send_stop() behaviour c61417fef99a ALSA: hda/realtek: Fix pop noise on ALC225 163489b64361 futex: Unbreak futex hashing 553d46b07dc4 futex: Fix inode life-time issue 66f28e110565 x86/mm: split vmalloc_sync_all() 9dfed456e1eb page-flags: fix a crash at SetPageError(THP_SWAP) 32991c960d0b mm, slub: prevent kmalloc_node crashes and memory leaks 623515739282 mm: slub: be more careful about the double cmpxchg of freelist 8e709bbe41d6 epoll: fix possible lost wakeup on epoll_ctl() path 69f434a05fb4 mm: do not allow MADV_PAGEOUT for CoW pages c3f54f0a68bf mm/hotplug: fix hot remove failure in SPARSEMEM|!VMEMMAP case 61cfbcce9e09 mm, memcg: throttle allocators based on ancestral memory.high 77c4bc4bf612 mm, memcg: fix corruption on 64-bit divisor in memory.high throttling ceca26903bd7 memcg: fix NULL pointer dereference in __mem_cgroup_usage_unregister_event 2439259c32c8 stm class: sys-t: Fix the use of time_after() f7ef7a020f3b drm/lease: fix WARNING in idr_destroy b4e798cab8e9 drm/amd/amdgpu: Fix GPR read from debugfs (v2) eaa7fe20231a btrfs: fix log context list corruption after rename whiteout error 039547fbd1e8 xhci: Do not open code __print_symbolic() in xhci trace events ac9d3279514c arm64: compat: Fix syscall number of compat_clock_getres 70ca8a95df81 rtc: max8907: add missing select REGMAP_IRQ eba75a365f55 modpost: move the namespace field in Module.symvers last 69a9b971406f intel_th: pci: Add Elkhart Lake CPU support 3bdc0f68a170 intel_th: Fix user-visible error codes 97097054a1f0 intel_th: msu: Fix the unexpected state warning 07c70054ba24 staging/speakup: fix get_word non-space look-ahead 35da67a8a50c staging: greybus: loopback_test: fix poll-mask build breakage fbe68a636982 staging: rtl8188eu: Add device id for MERCUSYS MW150US v2 5f9579641df2 kbuild: Disable -Wpointer-to-enum-cast 0f5be2f69e89 CIFS: fiemap: do not return EINVAL if get nothing 48a9bc9534f3 mmc: sdhci-cadence: set SDHCI_QUIRK2_PRESET_VALUE_BROKEN for UniPhier 8aafd5a0c63c mmc: sdhci-of-at91: fix cd-gpios for SAMA5D2 0c4e0f0d2e51 mmc: rtsx_pci: Fix support for speed-modes that relies on tuning dbb328d1a87d iio: light: vcnl4000: update sampling periods for vcnl4040 c3540b094edb iio: light: vcnl4000: update sampling periods for vcnl4200 7ad22950caf5 iio: adc: at91-sama5d2_adc: fix differential channels in triggered mode 4d71a4f76179 iio: adc: stm32-dfsdm: fix sleep in atomic context a79f53a2f5af iio: magnetometer: ak8974: Fix negative raw values in sysfs 6387b4002357 iio: accel: adxl372: Set iio_chan BE 3c69b794f96e iio: trigger: stm32-timer: disable master mode when stopping eb5f46b0cc55 iio: st_sensors: remap SMO8840 to LIS2DH12 69399842e4a9 iio: chemical: sps30: fix missing triggered buffer dependency 51d590fadc14 tty: fix compat TIOCGSERIAL checking wrong function ptr a754de70f6d6 tty: fix compat TIOCGSERIAL leaking uninitialized memory 279cdccb6dc7 ALSA: pcm: oss: Remove WARNING from snd_pcm_plug_alloc() checks 07ec940ceda5 ALSA: pcm: oss: Avoid plugin buffer overflow 59e4624e664c ALSA: seq: oss: Fix running status after receiving sysex f439c2ece795 ALSA: seq: virmidi: Fix running status after receiving sysex e2f1c2d0b6db ALSA: hda/realtek - Enable the headset of Acer N50-600 with ALC662 f0e819900968 ALSA: hda/realtek - Enable headset mic of Acer X2660G with ALC662 2d994c9cefc4 ALSA: line6: Fix endless MIDI read loop 64ab82cf614f USB: cdc-acm: fix rounding error in TIOCSSERIAL 9ed83da8cd97 USB: cdc-acm: fix close_delay and closing_wait units in TIOCSSERIAL 186b9564cf5e usb: typec: ucsi: displayport: Fix a potential race during registration ff1d876e9f4f usb: typec: ucsi: displayport: Fix NULL pointer dereference 7b5aab752efc usb: xhci: apply XHCI_SUSPEND_DELAY to AMD XHCI controller 1022:145c 6e1167db8d21 USB: serial: pl2303: add device-id for HP LD381 ade2ca96e7a6 usb: host: xhci-plat: add a shutdown bace91138933 USB: serial: option: add ME910G1 ECM composition 0x110b 2601053cafb4 usb: quirks: add NO_LPM quirk for RTL8153 based ethernet adapters d742e9874048 USB: Disable LPM on WD19's Realtek Hub 712d9c2e92ea Revert "drm/fbdev: Fallback to non tiled mode if all tiles not present" c71986d18dea binderfs: use refcount for binder control devices too 169bf660646a parse-maintainers: Mark as executable 4db2f87e15c8 block, bfq: fix overwrite of bfq_group pointer in bfq_find_set_group() 5d33ba6f385f xenbus: req->err should be updated before req->state 7a79e217e3a5 xenbus: req->body should be updated before req->state 25c3f96370a1 drm/amd/display: fix dcc swath size calculations on dcn1 46c5b0d8dfbb drm/amd/display: Clear link settings on MST disable connector e53a333014a3 drm/amdgpu: clean wptr on wb when gpu recovery b557b2f00682 riscv: Fix range looking for kernel image memblock 1c2106d2d9c1 riscv: Force flat memory model with no-mmu 0bc9de1b1c1b spi: spi_register_controller(): free bus id on error paths af7dd05d7c8f ASoC: stm32: sai: manage rebind issue a3f349393eed riscv: avoid the PIC offset of static percpu data in module beyond 2G limits 1804cdf99fdb dm integrity: use dm_bio_record and dm_bio_restore 2e7e6de9ae38 dm bio record: save/restore bi_end_io and bi_integrity 886a8fb13d0c altera-stapl: altera_get_note: prevent write beyond end of 'key' 2c4e36033ace drivers/perf: arm_pmu_acpi: Fix incorrect checking of gicc pointer 1002a094e066 drivers/perf: fsl_imx8_ddr: Correct the CLEAR bit definition 0f6ae2cba3b8 drm/exynos: hdmi: don't leak enable HDMI_EN regulator if probe fails 53138bea67b2 drm/exynos: dsi: fix workaround for the legacy clock name 41f88dc1adcc drm/exynos: dsi: propagate error value and silence meaningless warning 0c30297dddc0 spi/zynqmp: remove entry that causes a cs glitch b8ba4d74f9f3 spi: pxa2xx: Add CS control clock quirk 416e1f433c70 ARM: dts: dra7: Add "dma-ranges" property to PCIe RC DT nodes 74219d52d4e7 cifs: add missing mount option to /proc/mounts ddd8b3ed509a cifs: fix potential mismatch of UNC paths a7393e6f2ecf powerpc: Include .BTF section 9eee3e21a59d spi: qup: call spi_qup_pm_resume_runtime before suspending 1d4f214c8820 ARM: dts: dra7-l4: mark timer13-16 as pwm capable 5f657e5303d3 phy: ti: gmii-sel: do not fail in case of gmii ee1245396b6e phy: ti: gmii-sel: fix set of copy-paste errors 4d9020c3d802 drm/mediatek: Find the cursor plane instead of hard coding it 61c895d0f726 spi: spi-omap2-mcspi: Support probe deferral for DMA channels f9f635c04769 locks: reinstate locks_delete_block optimization 384e15fc4226 locks: fix a potential use-after-free problem when wakeup a waiter
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Steve Sakoman <steve@sakoman.com>
Currently only VERSION_ID field is sanitized, but os-release (5) has
more fields with the same requirement. Moreover, those fields come
unquoted in most distributions, because quotes are not needed for a
values without whitespaces.
Signed-off-by: Vyacheslav Yurkov <uvv.mail@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Steve Sakoman <steve@sakoman.com>
Benjamin Fair [Fri, 17 Apr 2020 18:58:17 +0000 (11:58 -0700)]
util-linux: fix build error in kill
Backport patches from upstream to fix a build error in the kill utility.
Fixes:
| In file included from ../util-linux-2.35.1/misc-utils/kill.c:57:
| ../util-linux-2.35.1/include/pidfd-utils.h: In function ‘pidfd_open’:
| ../util-linux-2.35.1/include/pidfd-utils.h:19:17: error: ‘SYS_pidfd_open’ undeclared (first use in this function); did you mean ‘pidfd_open’?
Signed-off-by: Benjamin Fair <benjaminfair@google.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Steve Sakoman <steve@sakoman.com>
Signed-off-by: Wang Mingyu <wangmy@cn.fujitsu.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Steve Sakoman <steve@sakoman.com>
Jan Luebbe [Wed, 29 Apr 2020 10:21:45 +0000 (12:21 +0200)]
openssl: upgrade 1.1.1f -> 1.1.1g
This also fixes CVE-2020-1967.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Steve Sakoman <steve@sakoman.com>
Initialize libgcrypt on first use otherwise
there comes below warning when check the status
of the ninfod.service.
# systemctl status ninfod.service
* ninfod.service - Respond to IPv6 Node Information Queries
Loaded: loaded (/lib/systemd/system/ninfod.service; enabled; vendor preset: enabled)
Active: active (running) since Wed 2020-04-29 05:18:21 UTC; 36s ago
Docs: man:ninfod(8)
Main PID: 347 (ninfod)
Tasks: 1 (limit: 9382)
Memory: 1.2M
CGroup: /system.slice/ninfod.service
`-347 /sbin/ninfod -d
Apr 29 05:18:21 intel-x86-64 systemd[1]: Started Respond to IPv6 Node Information Queries.
Apr 29 05:18:24 intel-x86-64 ninfod[347]: Libgcrypt warning: missing initialization - please fix the application
Richard Purdie [Thu, 30 Apr 2020 18:47:30 +0000 (19:47 +0100)]
gcc-target: Ensure buildtools-extended-tarball doesn't use arch=native
A nativesdk BBCLASSEXTEND was added to gcc-target without realising this
would pass arch=native through to it for x86-64. This heavily optimises
gcc output for the host its running on meaning it can't be reused via
sstate on other machines.
Add class-target overrides here to get the desired behaviour. All
targets have been covered for completeness.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Steve Sakoman <steve@sakoman.com>
Kai Kang [Mon, 27 Apr 2020 06:04:16 +0000 (14:04 +0800)]
pseudo: add macro guard for seccomp
It fails to compile pseudo-native on centos 7:
| ports/linux/pseudo_wrappers.c: In function ‘prctl’:
| ports/linux/pseudo_wrappers.c:129:14: error: ‘SECCOMP_SET_MODE_FILTER’ undeclared (first use in this function)
| if (cmd == SECCOMP_SET_MODE_FILTER) {
| ^
Add macro guard for the definition to avoid the failure.
Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Steve Sakoman <steve@sakoman.com>
Andrew Geissler [Mon, 27 Apr 2020 18:40:28 +0000 (13:40 -0500)]
libffi: fix v3.3 compile on ppc64le
The latest released version of libffi no longer compiles on ppc64le
based machines. Some searching found a patch that fixed our issue but
had not been submitted upstream to libffi.
It has now been submitted upstream with this PR:
https://github.com/libffi/libffi/pull/561
Signed-off-by: Andrew Geissler <geissonator@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Steve Sakoman <steve@sakoman.com>
This is needed in particular for newer versions of rpm
which would otherwise fail to build due to absence of omp.h header.
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Steve Sakoman <steve@sakoman.com>
Richard Purdie [Fri, 24 Apr 2020 12:23:27 +0000 (13:23 +0100)]
oeqa/qemurunner: Clean up failure handling
If you fail to setup the tap devices, runqemu will error quickly
however stdout/stderr are not shown to the user, instead a SystemExit
traceback is shown. This could explain some long since unexplained
failures on the autobuilder.
Rework the error handling so SystemExit isn't used and the
standard log failure messages can be shown. The code could
likely ultimatley need some restructuring to work effectively.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Steve Sakoman <steve@sakoman.com>
Richard Purdie [Sat, 25 Apr 2020 21:20:11 +0000 (22:20 +0100)]
targetcontrol: Fix leaking log handler
We had a mystery failure on the autobuilder where runqemu appeared to
be failing as a logfile directory no longer existed. The key to
reproducing was running a runqemu where the image was deleted (as
devtool does), then running another runqemu test. E.g.:
Richard Purdie [Mon, 20 Apr 2020 16:17:39 +0000 (17:17 +0100)]
staging: Fix overlapping file failures
If there are different providers of a file and they are swiched when the
recipe isn't machine specific, we can get tracebacks due to the overlapping
files. The issue is that the previous provider isn't uninstalled since
the system can't tell whether some later task needs them.
By tracking which tasks we depend upon, the code can now choose to
uninstall more things since a later task can reinstall if/as needed.
The code here was to protect against code with two different tasks
running in parallel which is still protected agaisnt.
[YOCTO #13702]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Steve Sakoman <steve@sakoman.com>
Richard Purdie [Mon, 20 Apr 2020 16:19:11 +0000 (17:19 +0100)]
oeqa/selftest: Add test for conflicting sysroot provider
sysroot-test depends on virtual/sysroot-test which we build for one machine,
switch machine, switch provider of virtual/sysroot-test and check that the
sysroot is correctly cleaned up. The files in the two providers overlap
so can cause errors if the sysroot code doesn't function correctly.
Yes, sysroot-test should be machine specific really to avoid this, however
the sysroot cleanup should also work.
This adds a test for bug:
[YOCTO #13702]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Steve Sakoman <steve@sakoman.com>
Tim Orling [Tue, 21 Apr 2020 22:25:08 +0000 (15:25 -0700)]
scripts/install-buildtools: bump to 3.1 release by default
By default, use the extended buildtools installer from the
Yocto Project 3.1 "dunfell" release.
Signed-off-by: Tim Orling <timothy.t.orling@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Steve Sakoman <steve@sakoman.com>
Alex Kiernan [Thu, 23 Apr 2020 14:12:07 +0000 (15:12 +0100)]
run-postinsts: Set RemainAfterExit on systemd unit
run-postinsts is only expected to run once, but during startup, but if
any dependency is pulled into a transaction, even once it has been
marked disabled, then it can be restarted.
This leads to occasional failures during QA if an ssh session starts
whilst the existing transaction is still running:
Finished Run pending postinsts.
run-postinsts.service: Succeeded.
Condition check resulted in Commit a transient machine-id on disk being skipped.
Condition check resulted in Bind mount volatile /srv being skipped.
Condition check resulted in Bind mount volatile /var/spool being skipped.
Condition check resulted in Bind mount volatile /var/lib being skipped.
Condition check resulted in Bind mount volatile /var/cache being skipped.
Condition check resulted in Platform Persistent Storage Archival being skipped.
Condition check resulted in Rebuild Hardware Database being skipped.
Starting Run pending postinsts...
Condition check resulted in Kernel Configuration File System being skipped.
Condition check resulted in FUSE Control File System being skipped.
Condition check resulted in Load Kernel Modules being skipped.
Condition check resulted in File System Check on Root Device being skipped.
Condition check resulted in Huge Pages File System being skipped.
Condition check resulted in Journal Audit Socket being skipped.
dropbear@125-192.168.7.2:22-192.168.7.1:44226.service: Succeeded.
Condition check resulted in Platform Persistent Storage Archival being skipped.
Started SSH Per-Connection Server (192.168.7.1:44226).
dropbear@124-192.168.7.2:22-192.168.7.1:44224.service: Succeeded.
Started SSH Per-Connection Server (192.168.7.1:44224).
Condition check resulted in Commit a transient machine-id on disk being skipped.
Condition check resulted in Bind mount volatile /srv being skipped.
Condition check resulted in Bind mount volatile /var/spool being skipped.
Condition check resulted in Bind mount volatile /var/lib being skipped.
Condition check resulted in Bind mount volatile /var/cache being skipped.
Condition check resulted in Platform Persistent Storage Archival being skipped.
Condition check resulted in Rebuild Hardware Database being skipped.
Failed to start Run pending postinsts.
run-postinsts.service: Failed with result 'start-limit-hit'.
run-postinsts.service: Start request repeated too quickly.
Setting RemainAfterExit ensures that the unit remains active and is not
gratuitously restarted, unless done so explicitly using systemctl
restart.
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Steve Sakoman <steve@sakoman.com>
Python's unittest will not propagate exceptions upside
of itself, but rather will just catch and print them.
The working way to make it stop is to send a SIGINT
(e.g. simulate a ctrl-c press), which will make it exit
with a KeyboardInterrupt exception.
This also makes pressing ctrl-c twice from bitbake work
again (previously hanging instances of bitbake and qemu were
left around, and bitbake would no longer start until they
were killed manually).
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Steve Sakoman <steve@sakoman.com>
Andrew Geissler [Wed, 22 Apr 2020 00:19:11 +0000 (19:19 -0500)]
boost: revert 1.72.0 regression
https://www.boost.org/users/history/version_1_72_0.html documents a
"Known Issue" and has a revert patch for an issue that causes code to
fail to compile that includes the coroutine function. Without this
patch, code which includes the asymmetric_coroutine.hpp will fail to
compile.
Signed-off-by: Andrew Geissler <geissonator@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Steve Sakoman <steve@sakoman.com>
Joe Slater [Wed, 15 Apr 2020 21:28:38 +0000 (14:28 -0700)]
vim: do not adjust script paths building for target
When cross-compiling, do not change scripts to use host
versions of perl and gawk.
Also, use INSANE_SKIP to suppress QA complaints if perl
or gawk are not on the target.
Signed-off-by: Joe Slater <joe.slater@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Steve Sakoman <steve@sakoman.com>
Shebang lines longer than 128 characters can give an error
depending on the operating system.
This implements a test that signals an error when locating a
faulty shebang.
YOCTO: #11053
Signed-off-by: Domarys Correa <domarys.correa@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Steve Sakoman <steve@sakoman.com>
some architectures e.g. mips complain in linking apps which have shared
libs that are linking with libiberty.a fixes errors like below
libiberty/../../libiberty/hashtab.c:285:(.text+0xf8): relocation R_MIPS_26 against `htab_create_typed_alloc' cannot be used when making a shared object; recompile with -fPIC
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Steve Sakoman <steve@sakoman.com>
gcc: Configure all gccs with --disable-install-libiberty
OE uses libiberty from binutils, since its properly compiled as pic
archive and applications and other libraries needing libiberty can
properly link with it.
With this option applied, explicit delete of libiberty headers and
libraries is not required in install step, since they wont get installed
in first place.
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Steve Sakoman <steve@sakoman.com>
go compiler is including go/src/cmd modules in -dev package which is in
conflict with go-runtime-dev which provides exact same copy of this
module along with other runtime modules, as a result when both go-dev and
go-runtime-dev are included in image then it results in rootfs failures,
here lets make go depend on go-runtime and dont install the cmd module
here explicitly.
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Steve Sakoman <steve@sakoman.com>
After below commit introduced, the LICENSE
field changed from BSD-4-Clause to bzip-1.0.6. 669600ef9b bzip2/pbzip2: Correct license information
But actually it should be bzip2-1.0.6,
update it to fix the below license warning:
WARNING: pbzip2-native-1.1.13-r0 do_populate_lic: pbzip2-native: No generic license file exists for: bzip-1.0.6 in any provider
Signed-off-by: Mingli Yu <mingli.yu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Steve Sakoman <steve@sakoman.com>
The common bzip2 license was renamed from "bzip2" to "bzip2-1.0.6" in
commit 669600ef to match the official SPDX identifier.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Steve Sakoman <steve@sakoman.com>
Richard Purdie [Tue, 14 Apr 2020 13:29:49 +0000 (14:29 +0100)]
bzip2/pbzip2: Correct license information
The license of pbzip2 looks slightly BSD like but is in fact the bzip2
license. The SPDX identifier for this is "bzip-1.0.6" since there is
another version of the bzip license out there.
To clear up all the confusion, use the SPDX license name and update
both recipes to refer to it. The copyright information is slightly
different between the codebases but the license looks the same.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Steve Sakoman <steve@sakoman.com>
Signed-off-by: Changqing Li <changqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Steve Sakoman <steve@sakoman.com>
Yi Zhao [Fri, 17 Apr 2020 10:15:27 +0000 (18:15 +0800)]
alsa-state: ignore 'No soundcards found' error in pkg_postinst
If there is no soundcards on the target (e.g. qemu), the pkp_postinst
function will report an error:
alsactl: load_state:1735: No soundcards found...
pkg_run_script: package "alsa-state" postinst script returned status 19.
opkg_configure: alsa-state.postinst returned 19.
Pass '-g' option to alsactl to ignore this error.
Signed-off-by: Yi Zhao <yi.zhao@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Steve Sakoman <steve@sakoman.com>
Tim Orling [Sat, 11 Apr 2020 01:27:02 +0000 (18:27 -0700)]
python3-manifest.json: add pathlib to core
The pathlib module is for Object-oriented filesystem paths
It also provides a lot of handy utilities for checking on
paths. This seems to justify adding it to the core package
along side os, sys, and the other *path libraries.
[YOCTO #13670]
Signed-off-by: Tim Orling <timothy.t.orling@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Steve Sakoman <steve@sakoman.com>
Wang Mingyu [Wed, 8 Apr 2020 09:00:14 +0000 (02:00 -0700)]
gnutls: upgrade 3.6.12 -> 3.6.13
Signed-off-by: Wang Mingyu <wangmy@cn.fujitsu.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Steve Sakoman <steve@sakoman.com>
Documentation says that if you exit 0 in a pkg_postinst it will marked as
installed.
If you exit 0, before running postinst-intercepts defer_to_first_boot, the
pkg_postinst_ontarget script will not be present on target.
The "exit 0" in tzdata makes it difficult to have a bbappend with a
pkg_postinst_target step when you have `INSTALL_TIMEZONE_FILE = 0`
Signed-off-by: Maxime Roussin-Bélanger <maxime.roussinbelanger@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Steve Sakoman <steve@sakoman.com>
Jeremy Puhlman [Wed, 15 Apr 2020 02:32:05 +0000 (19:32 -0700)]
buildtools-extended-tarball: Add libstc++.a
Builds like native-openjdk, really wants a to link
some tools against the static version. Since when
using the extended tarball, its the only place to
get it, add the library.
Signed-off-by: Jeremy Puhlman <jpuhlman@mvista.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Steve Sakoman <steve@sakoman.com>
Jeremy Puhlman [Wed, 15 Apr 2020 02:32:04 +0000 (19:32 -0700)]
nativesdk-gcc-runtime: enable building libstdc++.a
Signed-off-by: Jeremy Puhlman <jpuhlman@mvista.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Steve Sakoman <steve@sakoman.com>
Jeremy Puhlman [Wed, 8 Apr 2020 04:40:56 +0000 (21:40 -0700)]
qemu-system-native: Fix commented out PACKAGECONFIG
Signed-off-by: Jeremy A. Puhlman <jpuhlman@mvista.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Steve Sakoman <steve@sakoman.com>
Paul Barker [Wed, 8 Apr 2020 15:14:55 +0000 (16:14 +0100)]
kernel-yocto.bbclass: Fix deps when externalsrc is used
do_kernel_configme was recently removed from SRCTREECOVEREDTASKS so this
task still runs when externalsrc is used. This task normally runs after
do_patch but when externalsrc is used, do_patch is removed and this ordering
restriction does nothing. This allows bitbake to execute do_kernel_configme
too early, causing races with do_unpack.
This is fixed by adding in a dependency on do_unpack when externalsrc is
used.
Signed-off-by: Paul Barker <pbarker@konsulko.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Steve Sakoman <steve@sakoman.com>
u-boot.inc: install u-boot-initial-env as ${PN}-initial-env in $D and $DEPLOYDIR
The common u-boot.inc can be used by multiple recipes in the same build for
different cores and/or multiple stages of the bootloader. Naming initial-env
with ${PN} prefix avoids clashes in deploy and rootfs between those recipes.
This adds the missing feature 'negative offsets' which was present
in the orginal U-Boot based tools.
git change log:
* f4b9cde Allow negative offsets
* 45bf92a Detect sector size if not found in config
* 9f59db6 uboot_env: remove unused variables
* 65d243e README: libubootenv is now in oe-core
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Revert "dhclient: not always skip the nfsroot interface"
This reverts commit[27aec88 dhclient: not always skip
the nfsroot interface] which used to address the IP
address renew issue when boot a system in a nfsroot fs
and altogether boot with ip=dhcp.
But reported by some tester, the above commit introduces
below issue when run ltp test on a nfsroot system which
boot with ip=dhcp:
nfs: server 192.168.100.1 not responding, still trying
nfs: server 192.168.100.1 not responding, still trying
[snip]
So revert the above commit now to avoid blocking test.
Signed-off-by: Mingli Yu <mingli.yu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jan Luebbe [Mon, 6 Apr 2020 13:23:57 +0000 (15:23 +0200)]
apt-native: don't let dpkg overwrite files by default
With --force-overwrite (implied by --force-all), dpkg will not abort
when a package overwrites files from different packages. As this can
also lead to "The following package disappeared from your system as
all files have been overwritten by other packages: <package>" and
subsequently broken dependencies, this makes the simple case of
conflicting files hard to debug.
Instead of finding all possibly required force options, only disable
overwrite for now.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
systemd: Package systemd-hwdb-update.service into udev
Currently, this unit is packaged into udev-hwdb which then adds it as rdep
instead of rrecommends to systemd itself, this meant that even if we
added udev-hwdb to BAD_RECOMMENDATIONS, it would not be respected since
its a rdep, therefore move the service unit file into udev package
instead, this decouples the hard runtime dependency and restores the bad
recommendations expectations
Signed-off-by: Khem Raj <raj.khem@gmail.com> Cc: Alex Kiernan <alex.kiernan@gmail.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
pseudo: During DB fix, remove files that do not exist
If a file does not exist, either because it has been removed outside
bitbake, or because only some of the files have been moved to a
different location, delete it from the pseudo-db is the user decides to
fix the database.
Signed-off-by: Ricardo Ribalda Delgado <ricardo@ribalda.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This option adds the content of a rootfs on a specific location on the
rootfs.
It is very useful for making a partition that contains the rootfs for a
host and a target Eg:
/ -> Roofs for the host
/export/ -> Rootfs for the target (which will netboot)
Although today we support making a partition for "/export" this might
not be compatible with some upgrade systems, or we might be limited by
the number of partitions.
With this patch we can use something like:
part / --source rootfs --embed-rootfs target-image /export --embed-rootfs target-image2 /export2
on the .wks file.
Signed-off-by: Ricardo Ribalda Delgado <ricardo@ribalda.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
wic: Fix permissions when using exclude or include path
When parameters include_path or exclude_path are passed to the rootfs
plugin, it will copy the partition content into a folder and make all
the modifications there.
This is done using copyhardlinktree(), which does not take into
consideration the content of the pseudo folder, which contains the
information about the right permissions and ownership of the folders.
This results in a rootfs owned by the user that is running the wic
command (usually UID 1000), which makes some rootfs unbootable.
To fix this we copy the content of the pseudo folders to the new folder
and modify the pseudo database using the "pseudo -B" command.
Signed-off-by: Ricardo Ribalda Delgado <ricardo@ribalda.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 3 Apr 2020 12:55:12 +0000 (13:55 +0100)]
pseudo: Force seccomp to return success when in fact doing nothing
Pseudo changes the syscall access patterns which makes it incompatible with
seccomp. Therefore intercept the seccomp syscall and alter it, pretending that
seccomp was setup when in fact we do nothing. If we error as unsupported,
utilities like file will exit with errors so we can't just disable it.
This works around issues on platforms where seccomp is enabled in file
(e.g. archlinux).
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Windows: Enable Windows builds under WSLv2 and warn accordingly
Due to the architectural changes between Windows Subsystem for Linux v2,
and WSL v1 it should now be possible to run bitbake on the several distros
offered through the Microsoft Store.
WSLv2 is available on Windows 10 build number > 18917
The current build number may be checked by opening a cmd prompt on Windows
and running:
C:\Users\myuser>ver
Microsoft Windows [Version 10.0.19041.113]
If a distro has already been installed via the Microsoft Store, then we can
check which WSL version its using by opening a Windows Powershell (notice this
is a powershell and not a cmd prompt):
C:\WINDOWS\system32> wsl -l -v
NAME STATE VERSION
* Ubuntu Running 2
Debian Stopped 1
In this case it shows two distros installed, Ubuntu running WSLv2 and
Debian running WSLv1
To change the version of WSL being used by a certain distro run:
C:\WINDOWS\system32> wsl --set-version <Distro> 2
e.g
C:\WINDOWS\system32> wsl --set-version Debian 2
For more information on installing WSLv2 please look at:
There are some caveats related to the way storage is handled by WSLv2 though,
and at this point these have to be managed by the user manually, the storage
space used by WSL is not reflected immediately and since bitbake heavily uses
storage, after several builds this can prove to be a bit of an issue.
WSLv2 uses a VHDX file for storage, this issue can be easily avoided by
optimizing this file every now and then, this can be done via the following:
1.- Find the location of your VHDX file:
- Get the distro app package directory.
- Open Windows Powershell as Administrator and run:
Get-AppxPackage -Name "*<DISTRO>*" | Select PackageFamilyName
ls C:\Users\<user>\AppData\Local\Packages\CanonicalGroupLimited.UbuntuonWindows_79abcdefgh\LocalState\
Mode LastWriteTime Length Name
-a---- 3/14/2020 9:52 PM 57418973184 ext4.vhdx
The VHDX file path is:
C:\Users\<user>\AppData\Local\Packages\CanonicalGroupLimited.UbuntuonWindows_79abcdefgh\LocalState\ext4.vhdx
2.- Optimize your VHDX file (Also on Powershell):
- Make sure WSL is shutdown
wsl --shutdown
- Optimize it
optimize-vhd -Path C:\Users\<user>\AppData\Local\Packages\CanonicalGroupLimited.UbuntuonWindows_79abcdefgh\LocalState\ext4.vhdx -Mode full
A progress bar should be shown while optimizing the VHDX file.
As an example, after building core-image-sato, removing the TMPDIR did not reflect
any changes on Windows Explorer for storage space being used, after optimizing the
VHDX file, 14 extra GB were shown as free.
So, as long as the the user optimizes its storage, the builds should run smoothly.
This patch warns the user that is running bitbake under WSLv2, that they should
optimize the VHDX file eventually to avoid storage issues.
The same check previoulsy used for WSLv1 works for WSLv2, checking for the kernel
version:
WSLv1:
Linux version 4.4.0-19041-Microsoft (Microsoft@Microsoft.com)
WSLv2:
Linux version 4.19.84-microsoft-standard (oe-user@oe-host)
Builds have been tested under Ubuntu and Debian distros offered and installed through
the Microsoft Store, and other distros should be able to run builds just as fine.
Performance wise, using the same hardware, and same configuration a comparison between
builds using native Linux vs WSLv2 for the following targets has been performed:
- core-image-minimal
- core-image-sato
- core-image-sato-sdk
- meta-toolchain
No real evidence of any performance changes could be found, with WSLv2 builds running even
faster in some cases.
Running a recently built image can be done just as smoothly, if using "nographic" as
argument for runqemu, or if its a graphical image, installing an X server and running
runqemu runs just as fine.
Yi Zhao [Sat, 4 Apr 2020 09:11:08 +0000 (17:11 +0800)]
busybox: sysctl: ignore EIO of stable_secret below /proc/sys/net/ipv6/conf
Avoid confusing messages caused by EIO on reading
/proc/sys/net/ipv6/conf/*/stable_secret if those are not set yet.
Make it behave the same as procps(>=3.3.13).
Recent versions of ICU (64+) provides a tool for configuring ICU
locale data file with finer granularity [1]
Default generated size for libicudata.so.66.1 is ~27M, which is quite
large for embedded systems and all of them may not even need all locale
data.
This patch calls the icudata buildtool during configure on the icudata
and utilizes a filter called 'filter.json` ( empty by default) to
create the data, default behavior should remain same but someone can
add a filter.json in own layer to configure this data, e.g.
would only generate the locale data for english/german/italian
This would reduce the size of libicudata.so.66.1 to 12M
Ensure that icudata is generated using host-tools so it can deal with
endianness correctly, when host and target systems have different
endianness
install the icudtata file back into in/ folder so that main build
can now pickup this data file instead of regenerating it and wiping
out the filter changes that are expected to take effect
Use native compiler tools
Update the big-endian support patch to apply to latest Makefile.in
from icudata source and mark it as backport
defer applying 0001-Fix-big-endian-build.patch after moving new data/ in
binutils: Use configure options to disable gdb and dependencies
Deleting sources is a rough way of dealing with disabling components,
using configure option is elegant way and we also keep the sources
unchanged, this should not cause any funcitonal changes otherwise
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tim Orling [Fri, 3 Apr 2020 23:11:38 +0000 (16:11 -0700)]
scripts/install-buildtools: refactor for Python 3.4
Our least common denominator supported distro is debian-8
which has python 3.4. The whole point of the install-buildtools
script is to make it easier on the user to install buildtools
tarball. So it needs to run on Python 3.4.
The way we checked if the install was successful in the prior
version of the script was not workable in python 3.4. Since
the environment-setup-... script is currently just exporting
environment variables, use os.environ to do the equivalent from
values gleaned via regex from the environment-setup-... file.
Corrected a couple minor whitespace errors
NOTE: License changed to GPL-2.0-only due to inclusion of code
copied directly from bitbake/lib/bb/utils.py. This avoids the
need to depend on bitbake, which is now Python 3.5+ only.
Signed-off-by: Tim Orling <timothy.t.orling@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Gortmaker [Fri, 3 Apr 2020 16:21:58 +0000 (12:21 -0400)]
sanity.bbclass: echo current SDK_VENDOR if it is invalid
It can be frustrating if this sanity check triggers, but you
don't know why; you haven't explicitly set any SDK vars, or
similar.
At least echo out the offending value, so the end user has
a bit more information to go on.
Before:
SDK_VENDOR should be of the form '-foosdk' with a single dash
After:
SDK_VENDOR should be of the form '-foosdk' with a single dash; found '-overc-sdk'
Cc: Ross Burton <ross.burton@intel.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jeremy Puhlman [Fri, 3 Apr 2020 21:25:55 +0000 (14:25 -0700)]
nativesdk-binutils: correct path to ld.so.conf
The alternative ld.so patch is set up so the linker will search
the nativesdk sysroot before searching the host filesystem.
However the patch concatenates <sysroot>/etc and /etc/ld.so.conf
leading to a path that does not exist:
3061991 openat(AT_FDCWD, "/buildtools/sysroots/x86_64-pokysdk-linux/etc/etc/ld.so.conf",
O_RDONLY) = -1 ENOENT (No such file or directory)
In native-nspr, the build uses -lpthread, which triggers a search for librt, but because
of the above it drags in the system librt leading to errors as follows:
/buildtools/sysroots/x86_64-pokysdk-linux/usr/lib/gcc/x86_64-pokysdk-linux/
9.3.0/../../../../x86_64-pokysdk-linux/bin/ld: /lib64/librt.so.1:
undefined reference to `__clock_getcpuclockid@GLIBC_PRIVATE'
update concatenation to correctly construct the path to the nativesdk ld.so.conf
[YOCTO #13853]
Signed-off-by: Jeremy Puhlman <jpuhlman@mvista.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Thread 2 "multihandlesink" received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7ffff6bb9700 (LWP 18045)]
0x00007ffff7d65992 in g_source_unref_internal (source=0x7ffff00047d0, context=0x55555561c800, have_lock=1) at ../../../../../../../repo/workspace/sources/glib-2.0/glib/gmain.c:2146
2146 ../../../../../../../repo/workspace/sources/glib-2.0/glib/gmain.c: No such file or directory.
(gdb) bt
#0 0x00007ffff7d65992 in g_source_unref_internal (source=0x7ffff00047d0, context=0x55555561c800, have_lock=1) at ../../../../../../../repo/workspace/sources/glib-2.0/glib/gmain.c:2146
#1 0x00007ffff7d65bb6 in g_source_iter_next (iter=iter@entry=0x7ffff6bb8db0, source=source@entry=0x7ffff6bb8da8) at ../../../../../../../repo/workspace/sources/glib-2.0/glib/gmain.c:980
#2 0x00007ffff7d67ef3 in g_main_context_prepare (context=context@entry=0x55555561c800, priority=priority@entry=0x7ffff6bb8e30) at ../../../../../../../repo/workspace/sources/glib-2.0/glib/gmain.c:944
#3 0x00007ffff7d6896b in g_main_context_iterate (context=context@entry=0x55555561c800, block=block@entry=1, dispatch=dispatch@entry=1, self=<optimized out>) at ../../../../../../../repo/workspace/sources/glib-2.0/glib/gmain.c:3900
#4 0x00007ffff7d68b4c in g_main_context_iteration (context=0x55555561c800, may_block=may_block@entry=1) at ../../../../../../../repo/workspace/sources/glib-2.0/glib/gmain.c:3981
#5 0x00007ffff6be4482 in gst_multi_socket_sink_thread (mhsink=0x555555679ab0 [GstMultiSocketSink]) at ../../../gst-plugins-base-1.14.4/gst/tcp/gstmultisocketsink.c:1164
#6 0x00007ffff7d8fb35 in g_thread_proxy (data=0x55555565c770) at ../../../../../../../repo/workspace/sources/glib-2.0/glib/gthread.c:784
#7 0x00007ffff7841ebd in start_thread (arg=<optimized out>) at pthread_create.c:486
#8 0x00007ffff7aa12bf in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:95
#8 0x00007ffff7aa12bf in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:95
Signed-off-by: Daniel Gomez <daniel@qtec.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jeremy Puhlman [Thu, 2 Apr 2020 22:58:20 +0000 (15:58 -0700)]
busybox: on upgrade save busybox if it is the last shell
During a busybox upgrade on a ipk based system, it is possible
that busybox is the only shell in the system. During the uninstall
the alternative for /bin/sh is removed and everything after that
goes down hill.
* Add a check to verify if busybox is the shell, and save it to
the busyboxrm directory created in tmp. Then add an alternative
for /bin/sh that points to that busybox at the lowest priority.
* Add PATH to the busyboxrm directory using shell(as during an upgrade
busybox and its links are missing).
* When install over remove extra busybox if present.
deb and rpm are uneffected by the bug because they both drag in bash,
however neither upgrade seemed to have issue with the changes.
[YOCTO 13850]
Signed-off-by: Jeremy A. Puhlman <jpuhlman@mvista.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Kelly [Thu, 2 Apr 2020 20:56:32 +0000 (13:56 -0700)]
cmake: fix Python executable with cmake
Currently, CMake has two ways of finding Python executables:
FindPythonInterp and FindPython/FindPython3. FindPythonInterp is
deprecated and may be removed at some point. Currently, python3native
sets PYTHON_EXECUTABLE, which FindPythonInterp uses. This is a problem
for a few reasons:
- Setting PYTHON_EXECUTABLE as an environment variable doesn't work, as
CMake needs it to be set as an explicit CMake option via -D.
- Projects using the newer FindPython/FindPython3 don't pickup the right
Python, as the newer routines use Python_EXECUTABLE and
Python3_EXECUTABLE.
Fix this by setting PYTHON_EXECUTABLE, Python_EXECUTABLE, and
Python3_EXECUTABLE using -D options to EXTRA_OECMAKE.
The CMake routines are documented below:
https://cmake.org/cmake/help/latest/module/FindPythonInterp.html
https://cmake.org/cmake/help/latest/module/FindPython.html
https://cmake.org/cmake/help/latest/module/FindPython3.html
Signed-off-by: Martin Kelly <mkelly@xevo.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Thu, 2 Apr 2020 17:05:14 +0000 (19:05 +0200)]
prservice.py: fix do_package with newer Python in Ubuntu 20.04
* with Ubuntu 20.04 which is using python 3.8 I'm seeing a lot of errors like:
ERROR: libxml2-2.9.10-r0 do_package: Can NOT get PRAUTO, exception No module named '_sysconfigdata'
not sure what caused this from python 3.8, but this seems to work
* PRserv is enabled with:
PRSERV_HOST = "localhost:0"
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 2 Apr 2020 15:45:26 +0000 (16:45 +0100)]
sanity: Require gcc 5.0 minimum version
After polling various develoeprs, its clear that many layers are struggling
with gcc 4.8 and its better for the project to adopt 5.0 as a minimum
version at this point in time. We should have technology like
buildtools-extended-tarball available to ensure things still work on Centos 7
and Debian 8.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add iproute2 RDEPENDS for dhcp-client as
/sbin/dhclient-systemd-wrapper which called
by dhclient.service depends on ip command which
provided by iproute2 package when systemd enabled
in DISTRO_FEATURES.
Signed-off-by: Mingli Yu <mingli.yu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Otavio Salvador [Thu, 2 Apr 2020 00:14:31 +0000 (21:14 -0300)]
u-boot: Restore valid default environment for running system
One significant change from previous OE-Core releases was the move from
u-boot-fw-utils to libubootenv which offers a generic and not machine
specific alternative. However, it is not fully functional as currently
we don't provide the default environment nor the required configuration
file to be used by it.
This change address this and include on the default u-boot.inc the
needed code to generate, install and deploy the default environment.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
during rebuilding, when kernel version changed, some
source files also maybe changed. It could happened
that the source under ${S} messed up with some already
dropped files and also new files. Fix by clean the ${S}
before copy source files.
Signed-off-by: Changqing Li <changqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
inetutils: Use alternatives to avoid manpage conflict
Fix the following manpage conflicts:
* check_data_file_clashes: Package inetutils-doc wants to install file /usr/share/man/man1/tftp.1
But that file is already provided by package * tftp-hpa-doc
* check_data_file_clashes: Package inetutils-doc wants to install file /usr/share/man/man8/tftpd.8
But that file is already provided by package * tftp-hpa-doc
* check_data_file_clashes: Package netkit-telnet-doc wants to install file /usr/share/man/man8/telnetd.8
But that file is already provided by package * inetutils-doc
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Lee Chee Yang [Wed, 1 Apr 2020 06:39:56 +0000 (14:39 +0800)]
wic: align layer plugin path
wic look for external layer source plugin under scripts/lib/
while other tools look for lib/.
allow wic to check for source plugin at both scripts/lib/ and
lib/ to align with other tools while avoid breaking any existing
source plugin in external layer.
[YOCTO #13056]
Signed-off-by: Lee Chee Yang <chee.yang.lee@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jan Luebbe [Wed, 1 Apr 2020 14:58:04 +0000 (16:58 +0200)]
lib/oe/package_manager: avoid installing provided packages via apt
If there already is a package providing (and conflicting against)
packages what should be installed, apt will try remove the conflicting
package (target-sdk-provides-dummy) and any that depend on it (like apt
and dpkg). This usually fails because of the protection of essential
packages. In that case, no -dev/-dbg packages are installed to the SDK.
Avoid this problem by checking which packages are already provided and
removing them from the list to be installed. Also sort the list to make
it easier to read when debugging.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jan Luebbe [Wed, 1 Apr 2020 14:58:02 +0000 (16:58 +0200)]
lib/oe/package_manager: fix handling of last package
In commit 7d214b34e11dc57316ed5c1c7747c4601286f6d2, only the code in the
for loop was modified to store the pkgarch value. The code used if there
was no empty line at the end was not modified.
Instead of fixing the duplicated code, remove it and just make sure that
a final empty line is processed.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jan Luebbe [Wed, 1 Apr 2020 14:58:01 +0000 (16:58 +0200)]
lib/oe/package_manager: make sure to not remove packages in apt install
apt install can decide to remove already installed packages if there are
conflicts. Avoid this by explicitly specifying --no-remove. This will
then cause a "E: Packages need to be removed but remove is disabled."
message.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tim Orling [Tue, 31 Mar 2020 20:03:06 +0000 (13:03 -0700)]
install-buildtools: bump default to yocto-3.1_M3, fixes
Add ability to check md5sum (yocto-3.1_M2 and before) or sha256
(yocto-3.1_M3 and beyond).
Make regex for path in checksum file optional, since
for yocto-3.1_M3 the format is <checksum> <filename>,
but prior releases was <checksum> <path><filename>
Signed-off-by: Tim Orling <timothy.t.orling@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adding this code means we can increase the minimum version easily
in the future too (which will soon be needed).
RP: Change minimum version from 5.0 to 4.8 for initial patch Signed-off-by: Tim Orling <timothy.t.orling@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tim Orling [Tue, 31 Mar 2020 20:03:04 +0000 (13:03 -0700)]
lib/oe/utils.py: add get_host_compiler_version()
Add helper function to get the host compiler and version.
Do not assume compiler is gcc.
NOTE: cannot set env to d.getVar("PATH") as that does not contain
the session PATH which was set by environment-setup-... which
breaks the install-buildtools use-case
Signed-off-by: Tim Orling <timothy.t.orling@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
