This is necessary since the valgrind package depends on /usr/bin/perl.
This patch will fix this error while installing into rootfs:
Computing transaction...error: Can't install valgrind-3.8.1-r8@armv7a_vfp_neon: no package provides /usr/bin/perl
Signed-off-by: Felipe F. Tonello <eu@felipetonello.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Yi Zhao [Wed, 17 Jul 2013 09:06:57 +0000 (17:06 +0800)]
iproute2: Fix alternative link for ip command
In busybox the default location of symbolic link for command ip is
/sbin/ip. But in iproute2, the alternatvie link for ip is /bin/ip.
It will cause an error when running update-alternatives:
Cannot register alternative ip to /bin/ip since it is already registered
to /sbin/ip.
[YOCTO #4855]
Signed-off-by: Yi Zhao <yi.zhao@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
uclibc: Build ldd/ldcondif/iconv for main uclibc recipe
Currently these were not building as a result
uclibc based systems were missing ldd and any package
depending on ldd package were broken since the package
was empty.
buildtools-tarball: testimage needs the mmap python-module
The new testimage class needs the mmap python-module in the buildtools-tarball
on machines that use the tarball to provide the correct version of python.
Stefan Stanacar [Tue, 16 Jul 2013 11:42:35 +0000 (14:42 +0300)]
populate_sdk_base.bbclass: use new perm option for find
Old way find -perm +mode is no longer supported in newer
versions of find (Fedora 19). Man page says:
-perm +mode
This is no longer supported (and has been deprecated since
2005). Use -perm /mode instead.
[YOCTO #4853]
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Paul Eggleton [Mon, 15 Jul 2013 18:17:44 +0000 (19:17 +0100)]
classes/insane: allow libdir QA check to be skipped using INSANE_SKIP
This path check isn't handled in the normal way where a QA check
function is called for every file (there's some minor setup that we want
to avoid doing for every file) so we need to check INSANE_SKIP
explicitly.
In the process, change the code structure a little bit so that we can
report the package that contains the errant file.
Fixes [YOCTO #4822].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Simon Busch [Mon, 15 Jul 2013 18:11:44 +0000 (18:11 +0000)]
wpa-supplicant: backport patch to fix dbus interface for autoscan functionality
See https://lists.connman.net/pipermail/connman/2013-July/014871.html for details about
the issue with connman and http://lists.shmoo.com/pipermail/hostap/2013-July/028167.html
about the upstream submission of the patch.
Signed-off-by: Simon Busch <morphis@gravedo.de> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Mark Hatle [Mon, 15 Jul 2013 20:10:26 +0000 (15:10 -0500)]
sanity.bbclass: Update gcc sanity check
The gcc sanity check should be checking for the atomic function directly
instead of using the gcc macro. Older versions of gcc do not have the macro
defined, but do support the atomic operations. (glib-2.0 checks for both
the macro and the function, as long as one is available it will successfully
compile.)
Update the check to try both -mcpu=native and -mcpu=BUILD_ARCH. Tell the user
which version worked properly.
[YOCTO #4845]
Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Paul Eggleton [Mon, 15 Jul 2013 13:00:43 +0000 (14:00 +0100)]
qt-mobility: tighten up config generation and use PACKAGECONFIG
* Add DEPENDS on util-linux (for libblkid) and gstreamer (was likely
always being auto-detected since it is currently an unconditional
dependency of Qt itself in our Qt recipes)
* Use PACKAGECONFIG to allow individual configuration of pulseaudio and
bluetooth features rather than additional variables
* Generate a static platform configuration and tell the configure script
to use that instead of running compile tests during do_configure. This
should avoid the issue of camerabin sometimes being built and failing
as seen on the Yocto Project autobuilder.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Stefan Stanacar [Thu, 11 Jul 2013 19:00:51 +0000 (22:00 +0300)]
lib/oeqa/runtime/multilib.py: use readelf instead of file
file was pulled by rpm in sato images, readelf comes with binutils
so it's in ipk/deb too.
Also the test was looking at connmand instead of connman-applet
(which is what the testcase says and the AB nightly-multilib target installs)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Stefan Stanacar [Wed, 10 Jul 2013 11:33:32 +0000 (14:33 +0300)]
testimage.bbclass, lib/oeqa/utils/qemurunner.py: make boot timeout configurable and increase it
On a loaded host (such as an AB setup where multiple builds run)
the 200 seconds timeout might not be enough to reach the login prompt.
Also make it configurable so we can set it from local.conf/auto.conf
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Stefan Stanacar [Tue, 9 Jul 2013 14:52:55 +0000 (17:52 +0300)]
lib/oeqa/utils/sshcontrol.py: fix passing command to subprocess
Don't use shlex.split in subprocess call and also prepend
. /etc/profile, because PATH over ssh is always
/usr/bin:/bin which isn't what many tests expect.
Changed in v2:
We now need to use a separate call for scp command.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Stefan Stanacar [Mon, 8 Jul 2013 13:40:00 +0000 (16:40 +0300)]
lib/oeqa/runtime/dmesg.py: whitelist dmesg message for systemd net interface name
Messages such as:
"systemd-udevd[79]: error changing net interface name eth0 to enp0s3: Device or resource busy"
are harmless as systemd can't rename interfaces in qemu (the interface is already active).
Alternatively, passing net.ifnames=0 to the kernel will stop systemd renaming the interfaces.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
distrodata.bbaclass: change in git and svn package reporting
For git packages the Package Reporting System should always report the
latest HEAD.
For svn packages the new version reporting has the following format:
version+svn[r|-]revision
Mark Hatle [Fri, 12 Jul 2013 01:00:04 +0000 (20:00 -0500)]
qemu: QEMU fix libtool usage
QEMU uses the environment variable LIBTOOL by default. We want to ensure
we set it to the proper libtool version, instead of letting it default to
the host system version.
This corrects target building, and ensures we're linking properly for
native and nativesdk versions.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
This version of xdg-utils is needed by BA in order
to associate correctly types of files with PCManFM
file manager.
The release cycle of xdg-utils is very slow, so this
is the best shot of a stable version available for
YP 1.5 release.
As a reference, the previous stable version was released in 2007.
Also, desktop Linux distros use this release candidate as a stable
version, for example, Ubuntu 12.04.
Add checksum files required for the NSS softoken to operate in FIPS 140 mode.
The shlibsign is invoked to sign the libraries, and it is built for the target
architecture and doesn't support cross-compiling so far.
Invoke shlibsign at target's first boot time to generate checksum files.
Network Security Services (NSS) is a set of libraries designed to support
cross-platform development of security-enabled client and server applications.
Applications built with NSS can support SSL v2 and v3, TLS, PKCS 5, PKCS 7,
PKCS 11, PKCS 12, S/MIME, X.509 v3 certificates, and other security standards.
Darren Hart [Tue, 9 Jul 2013 22:15:28 +0000 (15:15 -0700)]
alsa-state: Provide an empty asound.conf by default
An empty asound.conf should work for most cases. The existing asound.conf
uses plug dmix which causes arecord to fail without a special -D device
specification on the command line (as no capture device is defined).
Clear asound.conf for the default case. Any needed changes should be
made in the BSP layers.
In the new stable busybox_1.21.1 default location of symbolic link for
powertop has been changed: /usr/sbin instead of /bin. This update breaks
creation of alternative links when both busybox and powertop packages are
installed on the system.
Fix: modification of ALTERNATIVE_LINK_NAME in powertop recipe.
This allows to install cogl-gles2 and cogl-pango only when needed and
enables Debian package renaming. This stops cogl-pango from dragging
in unwanted runtime dependencies, if cogl-pango isn't used.
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
package_rpm.bbclass: remove xx.spec before doing rpmbuild xx.src.rpm
If the spec file already exist, and has not been stored into pseudo's files.db,
it maybe cause rpmbuild src.rpm fail, so remove it before doing rpmbuild src.rpm.
Jonathan Liu [Wed, 10 Jul 2013 03:19:45 +0000 (03:19 +0000)]
boot-directdisk: allow specifying custom MBR disk signature
This introduces a DISK_SIGNATURE variable that allows controlling the
32-bit MBR disk signature. By default it is set to an automatically
generated disk signature but it may by overridden in the image recipe
by setting DISK_SIGNATURE to a 8 digit hex string.
This DISK_SIGNATURE variable can also be used in the image recipe to
specify the root by UUID using:
SYSLINUX_ROOT = "root=PARTUUID=${DISK_SIGNATURE}-02"
Specifying the root by UUID allows the kernel to locate the root
filesystem even if the device name changes (e.g. /dev/hda2, /dev/hdb2 or
/dev/sdb2 instead of /dev/sda2) due to differences in hardware
configuration.
Signed-off-by: Jonathan Liu <net147@gmail.com> Acked-by: Darren hart <dvhart@linux.intel.com>
Radu Moisan [Wed, 10 Jul 2013 12:24:11 +0000 (12:24 +0000)]
iputils: Upgrade to v20121221
Removed obsolete patches
Header for arping changed. New author added.
Capability support enabled by default(upstream) -> added libcap to DEPENDS
Gnutls enabled by default(upstream) -> switched from openssl to gnutls
Signed-off-by: Radu Moisan <radu.moisan@intel.com>
pango-module-basic-x has been removed from pango-1.31.0 and we're using
pango-1.32.5, so we should not refer pango-module-basic-x.
Commit 194b6ee552318ec6c494f34ed9f0979d0460fe4f
Author: Behdad Esfahbod <behdad@behdad.org>
Date: Thu Aug 16 21:48:50 2012 -0400
glib-2.0: add -march=i486 into CFLAGS automatically when needed.
glib configure will check if current gcc need -march=i486,
when gcc need -march=i486 but CFLAGS don't have,
glib configure will abort and advise the user to add -march=i486.
This will break the build process,it's not good for automatic build system.
so change this to adding -march=i486 automatically when it is needed.
Ross Burton [Thu, 4 Jul 2013 15:36:34 +0000 (16:36 +0100)]
pango: drop unexplainable elfutils dependency
In dafefa7bd4de518adb63ec19390b77a56cb65d8e elfutils was added as a
build-dependency of Pango. However there is no such linkage inside Pango, and
it builds fine without elfutils.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Ross Burton [Thu, 4 Jul 2013 14:37:50 +0000 (15:37 +0100)]
gtkdoc: set the default docdir to ${S}, not ${B}
Previously these directories were the same location, but with
seperatebuilddir.inc they are not and putting the file into ${B} means it goes
to the wrong place for autoreconf.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Paul Eggleton [Thu, 4 Jul 2013 11:26:04 +0000 (12:26 +0100)]
cmake: fix configure error if system Qt installation is broken
If the host Qt installation exists but is incomplete or the installed
qmake architecture doesn't match that of the Qt libraries, cmake was
failing at do_configure. cmake 2.8.10 failed silently here so we should
make 2.8.11 do the same.
Fixes [YOCTO #4565].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
We should create the /var/log/dmesg.log file as a default.
If we don't then a later kernel error can flush the dmesg
ring buffer, losing valuable debug information.
/etc/init.d/hostname.sh does not have a graceful fallback if the
/etc/hostname file doesn't exist. Other systems such as Ubuntu and RH
will either leave the hostname in place, if a proper hostname is
already set, otherwise it will set the hostname to 'localhost' when
the /etc/hostname files doesn't exist.
As you can see we have to add some additional handling to provide this
behavior when the system's hostname command doesn't take the '-b'
option.
Ting Liu [Thu, 4 Jul 2013 01:59:37 +0000 (09:59 +0800)]
qemu: use PACKAGECONFIG to address libaio/attr/libcap dependencies
Move to using the PACKAGECONFIG mechanism to select configure options
and dependencies. Without this the system will attempt to discover
various dependencies, and sometimes does so incorrectly.
Signed-off-by: Ting Liu <b28495@freescale.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Martin Jansa [Fri, 5 Jul 2013 01:05:22 +0000 (03:05 +0200)]
systemtap: inherit pkgconfig
* systemtap-native was failing with undefined AC_DEFINE
configure.ac:56: error: possibly undefined macro: AC_DEFINE
If this token and others are legitimate, please use m4_pattern_allow.
See the Autoconf documentation.
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Martin Jansa [Fri, 5 Jul 2013 00:49:54 +0000 (02:49 +0200)]
libpam: inherit pkgconfig
* missing dependency on pkgconfig-native was causing
that PKG_CHECK_MODULES(DBUS, dbus-1) stayed unexpanded in
configure script:
checking for dbm_store in -lndbm... no
libpam/1.1.6-r2/Linux-PAM-1.1.6/configure:
line 14217: syntax error near unexpected token `libtirpc,'
libpam/1.1.6-r2/Linux-PAM-1.1.6/configure:
line 14217: ` PKG_CHECK_MODULES(libtirpc, libtirpc,'
Configure failed. The contents of all config.log files follows to aid
debugging
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Martin Jansa [Fri, 5 Jul 2013 00:43:17 +0000 (02:43 +0200)]
quota: inherit pkgconfig
* missing dependency on pkgconfig-native was causing
that PKG_CHECK_MODULES(DBUS, dbus-1) stayed unexpanded in
configure script:
checking for ext2fs_initialize in -lext2fs... yes
quota/4.01-r1/quota-tools/configure: line 3746: syntax error near unexpected token `DBUS,'
quota/4.01-r1/quota-tools/configure: line 3746: ` PKG_CHECK_MODULES(DBUS, dbus-1)'
Configure failed. The contents of all config.log files follows to aid debugging
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Martin Jansa [Thu, 4 Jul 2013 08:14:48 +0000 (10:14 +0200)]
taglib: add missing dependency on zlib
* without target zlib it tries to use native one:
| /OE/sysroots/x86_64-linux/usr/lib/libz.so: could not read symbols: File in wrong format
| collect2: error: ld returned 1 exit status
| make[2]: *** [taglib/libtag.so.1.12.0] Error 1
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Martin Jansa [Thu, 4 Jul 2013 08:01:24 +0000 (10:01 +0200)]
gst-plugins-bad: inherit gsettings
* do_configure fails without native glib-compile-schemas:
| checking for glib-compile-schemas... no
| configure: error: glib-compile-schemas not found.
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
