Otavio Salvador [Tue, 3 Jul 2018 22:13:51 +0000 (19:13 -0300)]
image_types_fsl.bbclass: Use IMAGE_LINK_NAME for mxs binaries
The binary is generated as part of the image build so it should use
the same naming schema to provide consistency. This also fixes the wks
templates which use it.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
André Draszik [Wed, 19 Sep 2018 13:35:49 +0000 (14:35 +0100)]
libsdl2: avoid basehash changes
When adding meta-freescale, the sstate basehash of libsdl2 changes
because EXTRA_OECONF_IMX is appended to EXTRA_OECONF unconditionally,
causing EXTRA_OECONF to now depend on EXTRA_OECONF_IMX, invalidating
the sstate.
This is particularly annoying for the native flavour of this
recipe, because qemu-native depends on libsdl2-native, causing a
massive rebuild of a lot of packages for no good reason, preventing
efficient sstate re-use across different machines.
Just drop EXTRA_OECONF_IMX and append to EXTRA_OECONF using
variable overrides directly.
Signed-off-by: André Draszik <git@andred.net> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Andreas Müller [Fri, 14 Sep 2018 09:48:50 +0000 (11:48 +0200)]
linux-fslc/defconfig: CONFIG_BT_BNEP=m
This is necessary to support network over bluetooth:
| Sep 11 15:36:33 imx6qdl-variscite-som bluetoothd[281]: kernel lacks bnep-protocol support
| Sep 11 15:36:33 imx6qdl-variscite-som bluetoothd[281]: System does not support network plugin
Andreas Müller [Fri, 14 Sep 2018 09:48:49 +0000 (11:48 +0200)]
linux-fslc/defconfig: Add CONFIG_NET_NS=y
systemd in default oe-core configuration complains:
| Sep 11 15:36:33 imx6qdl-variscite-som systemd[1]: Starting Hostname Service...
| Sep 11 15:36:33 imx6qdl-variscite-som systemd[296]: systemd-hostnamed.service: PrivateNetwork=yes is configured, but the kernel does not support network namespaces, ignorin>
Otavio Salvador [Sat, 15 Sep 2018 14:00:05 +0000 (11:00 -0300)]
u-boot-fslc: Upgrade to 2018.09-based fork
This updates the fork to current 2018.09 release and apply following
changes on top:
62f2841dc4 pico-imx6ul: Add instructions for booting in Falcon mode a803c01c03 pico-imx6ul: Add Falcon mode support 3e5f58a2a4 wandboard: README: Include the mx6qp variant in the list 28b8458749 imx: imx6ull: fix pinmux input_val for uart5 rx pin 1bc802f9cc pico-imx6ul: Remove CONFIG_FSL_USDHC from .h cc97092f7c pico-imx6ul: Add new pico-hobbit config 11aaa94cd8 pico-imx6ul: Sync README with pico-imx7d 52723c960f pico-imx6ul: Improve default DFU settings c90fa9c1a2 pico-imx6ul: Add bootmenu to choose the baseboard 2141bc7952 pico-imx6ul: Sync defconfig with new changes 9ff1d5305d pico-imx6ul: Update the README file 2b0e81461c pico-imx6ul: Add support for the 512MB module e45ab0b309 pico-imx6ul: Add bmode support ad3c1b13d8 pico-imx6ul: Add fastboot support fa2c10bbac pico-imx6ul: Convert to SPL b143e3f027 pico-imx6ul: Convert to distro config a9c45f15b2 mx6sabre_common: Allow the videoargs to be passed to bootargs b584b845b1 mx25pdk: Change root to use a single partition layout 146e490814 mx6sabre_common: Dynamically change the video output a278950282 mx6sabresd: Enable video interfaces in bootargs 77cac8a16e mx6sabresd: Use LDO dtb file until LDO bypass support is added be4d1c4100 mx6slevk: Use LDO dtb file until LDO bypass support is added
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Otavio Salvador [Wed, 12 Sep 2018 12:41:09 +0000 (09:41 -0300)]
wayland-protocols: Avoid recipe parsing for foreign machines
This restricts the parsing for machines which has either imxgpu or
imxfbdev SoC features.
Fixes: contamination of other BSP machines Reported-by: Andreas Müller <schnitzeltony@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Yuqing Zhu [Mon, 6 Aug 2018 09:23:30 +0000 (17:23 +0800)]
gstreamer1.0: Upgrade to v1.14.imx
Bugfix/Optimization:
baseparse: Handle base parse error.
baseparse: Unset FLAG_DISCONT when push to adapter.
Or the DISCONT flag will always be set on each frame,
for the first chain in buffer.
baseparse: Push adapter remainning data in
pass through mode to avoid missing data.
poll: Need check if can read event of buffer
for video decoder based on V4L2 driver.
Add the API for it.
inputselector: Proceed non-active pad buffer even if active pad reach eos
Non-active pad will be blocked if active pad reach eos in
inputselector, which will cause all pipeline be blocked.
Inputselector should proceed non-active pad buffer based
on clock even if active pad reach eos.
Change to sync with clock for better user experience.
Signed-off-by: Yuqing Zhu <carol.zhu@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[220]: Failed to apply ACL on /dev/v4l-subdev0: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[224]: Failed to apply ACL on /dev/v4l-subdev1: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[215]: Failed to apply ACL on /dev/v4l-subdev10: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[228]: Failed to apply ACL on /dev/v4l-subdev2: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[232]: Failed to apply ACL on /dev/v4l-subdev5: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[217]: Failed to apply ACL on /dev/v4l-subdev11: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[214]: Failed to apply ACL on /dev/dri/card1: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[216]: Failed to apply ACL on /dev/v4l-subdev8: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[226]: Failed to apply ACL on /dev/v4l-subdev9: Operation not supported
and nasty follow-ups: Starting weston from sddm as unpriviledged user fails
with some hints on missing access rights.
For a better understanding CONFIG_TMPFS=y was added which was set indirectly
by CONFIG_DEVTMPFS=y
Signed-off-by: Andreas Müller <schnitzeltony@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Marc Ferland [Mon, 6 Aug 2018 19:18:25 +0000 (15:18 -0400)]
linux-mfgtool: Simplify linux-mfgtool support
As OpenEmbedded-Core now supports (from commit 5b4aab6b40cf21471442e21abc8051b38985de84) building multiple kernels,
this patch completly replaces the old linux-mfgtool with a single
statement:
KERNEL_PACKAGE_NAME = "linux-mfgtool"
and it works surprisingly well! This patch also provides a separate
defconfig for linux-imx-mfgtool (which currently is a copy of
linux-imx defconfig).
Note: The linux-mfgtool kernel will be deployed in ${DEPLOY}/mfgtool.
Signed-off-by: Marc Ferland <ferlandm@amotus.ca> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Daiane Angolini [Thu, 23 Aug 2018 19:26:10 +0000 (16:26 -0300)]
imx-alsa-plugins: Make imx7ulp a compatible machine
>From [1] we know the imx-alsa-plugins_1.0.26 does support all imx7, and
it is defined in the BSP as MACHINE_EXTRA_RRECOMMENDS, so this patch add
imx7ulp as compatible.
It also fixes the following error (when building for imx7ulpevk):
ERROR: Nothing RPROVIDES 'imx-alsa-plugins' (but
/home/daiane/code/yocto/master/sources/poky/meta/recipes-core/images/core-image-base.bb,
/home/daiane/code/yocto/master/sources/poky/meta/recipes-core/packagegroups/packagegroup-base.bb
RDEPENDS on or otherwise requires it)
imx-alsa-plugins was skipped: incompatible with machine imx7ulpevk (not
in COMPATIBLE_MACHINE)
Tom Hochstein [Fri, 27 Jul 2018 18:37:04 +0000 (13:37 -0500)]
imx-vpu-hantro: Update to 1.7.0
- Vp9: rectify the consumed length for error return
- MJPEG: bug fixing in trickmode
- H264: bug fixing for special clip containing invalid syntax value
- RV: limit the HW read pointer in valid range
- Common: Export setinfo() API in codec.h
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
The recipe explicitly sets a conflict between the two packages libgl-imx
and libgl-mesa with some python magic, so one shouldn't RDEPEND on the other.
e.g. when building the SDK most -dev packages are missing and one gets:
| Problem: package libgl-imx-dev-1:6.2.4.p1.2+aarch32-r0.armv7at2hf_neon_mx6qdl requires libgl-mesa-dev, but none of the providers can be installed
| - package libgl-mesa-dev-2:18.1.3-r0.armv7at2hf_neon_mx6qdl conflicts with libgl-dev provided by libgl-imx-dev-1:6.2.4.p1.2+aarch32-r0.armv7at2hf_neon_mx6qdl
| - conflicting requests
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Max Krummenacher [Mon, 23 Jul 2018 20:13:19 +0000 (22:13 +0200)]
dtc-145: Deploy renamed binary only and add new class
dtc-145-native is used by older U-Boot recipes. U-Boot only depends on
the native dtc binary. So, to not clash with files from the regular dtc native
build do only install the dtc binary renamed to dtc-145. Also, create
a new class to handle with dtc-145 dependency.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
