New dependency on libfm & menu-cache, which are added in previous commits
following patches are removed as they either don't apply or this new version
has no those problems:
desktop.patch
no-fam.patch
no-warnings.patch
pcmanfm-mips-fix.patch
the pending one is aowl-window-menu.patch, which need more work as the sources
have changed a lot. So far w/o this patch it still works. but we need more
verification later
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com> Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Qing He [Wed, 21 Jul 2010 05:34:35 +0000 (13:34 +0800)]
udev: upgrade to version 158
older versions are kept untouched for now
changes:
- udev has diverged a lot, the udev.inc was based on a quite dated
version, thus doesn't reflect current status of udev, create a
new include file udev-new.inc to adapt
- separate libudev{,-dev,-dbg} apart from udev
- --with-udev-prefix is removed. change ${libexecdir} to
${base_libdir}/udev, which is described in INSTALL file.
- udev.pc is provided in ${datadir}/pkgconfig, since it's used
to indicate the existence of udev itself instead of development
headers and libs, pack it in udev instead of udev-dev
- udev-extras is disabled since we are missing libacl, this also
means gudev is missing as for now
- other cleanups, e.g. do_stage, do_install, EXTRA_OEMAKE
todo:
- udev-extras
- remove old udev versions
- rebase udev-145 on udev-new.inc as well
Kevin Tian [Fri, 23 Jul 2010 07:17:06 +0000 (15:17 +0800)]
expat: use gzip-native for unpack
expat 2.0.1 archive is generated with DOS format, which causes CRC
error for some version of gzip (<1.4), e.g. on Unbuntu 10.04. This
commit adds do_unpack dependency to gzip-native, and thus to use
local compiled binary to address this issue. Since 1.4 is a known
version solving this issue, also specify a default version for
gzip-native
Qing He [Wed, 14 Jul 2010 14:09:26 +0000 (22:09 +0800)]
dhcp: upgrade to 4.1.1-P1
from version 4.1.0
changes:
original .bb file is based on dhcp3, whose build system differs from
dhcp 4.x, add a new dhcp4.inc and preserve dhcp3.inc for reference,
this should fix the conf file location bug of dhclient/dhcpd 4.1.0
- defining _PATH_DHC{LIENT,PD}_CONF in make parameter no longer works,
put these definition to includes/site.h
- delete upstream version of conf files, which are not used, and
with an installation path hardcoded to ${sysconfdir}
- similar thing happen for leases file, use new configure option to
specify
- RANLIB, LIBDIR, etc. as make parameter are no longer necessary
Qing He [Wed, 21 Jul 2010 07:12:29 +0000 (15:12 +0800)]
util-linux: upgrade to version 2.17.2
from 2.17
changes:
- clarify license. the package does contains a standalone utility
called lscpu that is under GPLv3+, fortunately it's note packaged
as for now
- the installation path of getopt has changed
todo:
- move libblkid and libuuid into separate packages
changes:
- consolidate hal-info.inc and hal-info_git.bb, git version is used
as a reference and is not preferred
- preferred version updated to 20091130
Qing He [Tue, 20 Jul 2010 02:35:15 +0000 (10:35 +0800)]
hal: upgrade to version 0.5.14
from 0.5.13
changes:
- udev rules dir has been changing to /lib/udev/rules.d in udev
upstream, add an override to stay in /etc/rules.d for compatibility
- consolidate hal.inc and hal_git.bb, hal_git.bb is used as a
reference thus should have a negative preference
- change preferred version of hal to 0.5.14
- remove hal_0.5.11+0.5.12rc1
- remove RRECOMMENDS on udev-utils, the package is to be removed
Qing He [Fri, 16 Jul 2010 04:48:08 +0000 (12:48 +0800)]
libusb-compat: upgrade to version 0.1.3
from 0.0.9, also remove libusb recipe (see below)
changes:
- remove some unnecessary logics derived from libusb-0.1
- now PROVIDES libusb
- bluez4 depends on libusb instead of libusb-compat
libusb-0.1 vs. libusb-compat
libusb-compat is intended to be a drop-in replacement of libusb-0.1,
building on top of libusb-1.0 (which has different API from -0.1).
Few known packages don't work with libusb-compat, notable example
is libmtp. Since most packages work very well with libusb-compat,
and libusb-compat doesn't suffer from power consumption issue of
libusb-0.1 (which is often very important for embedded systems),
drop libusb-0.1 and move to libusb-compat completely. If we see
any problems in the future, either the package should be fixed
or we can add back libusb-0.1 as needed.
Qing He [Thu, 15 Jul 2010 05:07:55 +0000 (13:07 +0800)]
libusb1: upgrade to version 1.0.8
from 0.9.2
changes:
- the previous recipe was derived from libusb-0.1 and thus had many
inconsistencies, e.g. binconfig and lib_packages are not necessary,
libusb1 doesn't provide libusb++, etc. Remove these legacies
- remove the patch 0.9.0-gcc3.4-compat-fix
Dexuan Cui [Thu, 22 Jul 2010 03:52:33 +0000 (11:52 +0800)]
xcb-util: add the latest version 0.3.6
startup-notification_0.10 depends on xcb-util, so I add this package.
xcb-util.inc and xcb-util_0.3.6.bb are based on recipes from OpenEmbedded;
The changes I made are: updating HOMEPAGE,BUGTRACKER,LICENSE and
LIC_FILES_CHKSUM, and changing "include xcb-util.inc" to
"require xcb-util.inc", and using the latest version 0.3.6.
add gperf dependency and remove do_staging
Signed-off-by: Saul Wold <Saul.Wold@intel.com> Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Jeff Dike [Thu, 22 Jul 2010 21:30:49 +0000 (17:30 -0400)]
libdrm-poulsbo: Provide libdrm-poulsbo instead of libdrm
In order to allow this package to be build alongside the regular
libdrm, it was made to export libdrm-poulsbo and its users make to use
libdrm-poulsbo instead of libdrm. libva and xserver-psb were make to
build against libdrm-poulsbo. While I was in there, I changed a couple
of misspellings of COMPATIBLE and removed a bunch of ';patch=1'.
rootfs_ipk: error when dependencies cannot be satisfied
Per bpo#109 dependency failure during rootfs generation did not cause an error
despite that it would cause errors later on in the process. This patch updates
the key phrases searched for in the log checking function.
Kevin Tian [Wed, 21 Jul 2010 07:34:51 +0000 (15:34 +0800)]
pkgconfig_staging.bbclass: remove it
this is one existing for stale reason when package's own Makefile doesn't
handle .pc correctly. After previous commits to remove unnecessary inheritage
on it (sqlite3, libpng), the only remaining is libgcrypt. Libgcrypt itself
doesn't ship a .pc and poky generates one. In this case, simply move the
manual installation to its own do_install.
Richard Purdie [Thu, 22 Jul 2010 10:41:00 +0000 (11:41 +0100)]
stagemanager: Move functionality into the scripts directory
Since scripts is now in PATH thanks to the layer functionality there is
no longer any need to have this recipe full of special cases, the scripts
can just be placed there.
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
Kevin Tian [Thu, 22 Jul 2010 05:36:42 +0000 (13:36 +0800)]
opkg-utils: add do_install after NATIVE_INSTALL_WORKS
NATIVE_INSTALL_WORKS implicates an explicit do_install required or else
its binaries are not installed to sysroot, which result in error like:
sh: opkg-build not found
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com> Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Jeff Dike [Wed, 21 Jul 2010 21:31:45 +0000 (17:31 -0400)]
meta-emenlow: Layer for eMenlow-based systems.
This layer provides a kernel suitable for booting on eMenlow-based systems,
plus support for Poulsbo graphics. The Poulsbo support includes a
kernel patch for the graphics driver, a couple of libraries, the 2D
and 3D X drivers, and a properly configured X server.
The closed portions of this support are in the 3D driver, xpsb-glx.
This package contains the binaries for the libraries that communicate
with the kernel driver and a mesa library which uses those libraries.
There is a README in meta-emenlow/ describing how to enable this layer.
Where possible, the recipes use bitbake's new .bbappend facility in
order to avoid copying recipes from meta/.
There are checksums and license information for all of the new packages.
Kevin Tian [Wed, 21 Jul 2010 05:21:49 +0000 (13:21 +0800)]
module-init-tools: upgrade to 3.12
[Patches]
KEEP _ignore_arch_directory_: ignore /etc/modprobe.d/arch, not sure reason now.
keep it and to be verified later
REMOVE _module-init-tools-remove-index.patch_: in upstream
NEW _disable_man.patch_: a simpler patch to replace below removed two
REMOVE _manpagesopt_: due to above new patch
REMOVE _no_man_rebuild_: ditto
KEEP _modutils_extension_: poky has its own name convention and thus need such knowledge
in code
[Recipe]
- adjust indention
- remove some old lines like ${S} and EXTRA_OECONF
Kevin Tian [Tue, 20 Jul 2010 11:39:57 +0000 (19:39 +0800)]
libpng: upgrade to 1.2.44
although the latest version is 1.4.3, some API changes happen which are not
compatible to some packages (such as libmatchbox using png_check_sig which
is abandoned in 1.4 version). I didn't check fully about other broken places,
and then be conservative to choose 1.2.44 as the target instead atm.
[Patches]
REMOVE _makefile_fix.patch_: a specific fix for libtool2.2.2. with 2.2.10, it's
not required then
[Recipe]
- add license checksum
- remove old do_install and do_package
- clean up package split
- remove inherit pkgconfig_stage, since its own Makefile handles it well
Kevin Tian [Tue, 20 Jul 2010 05:10:14 +0000 (13:10 +0800)]
libidn: upgrade to 0.6.14(GPLv2), and 1.19 (GPLv3)
libidn changed to GPLv3 since 2007 (its 1.0 release), so this upgrade includes two:
0.6.14 (GPLv2):
- change SRC_URI as original doesn't work
- remove original do_configure_prepend, which doesn't make any sense when inheriting
autotools
- this version includes a local copy of AC_USE_SYSTEM_EXTENSIONS which conflicts with
latest autoconf. Actually it's not necessary and remove all references to local version
1.19 (GPLv3):
- split a new package 'idn' for command line tools, which are licensed under GPLv3.
keep other bits in libidn licensed under LGPLv2.1
Kevin Tian [Mon, 19 Jul 2010 02:21:28 +0000 (10:21 +0800)]
gperf: upgrade to 3.0.4
[Patches]
REMOVE _autoreconf.patch_: no need to duplicate acinclude.m4 in every subdirectory
[Recipe]
- Keep original 3.0.3 version for GPLv2 requirement. 3.0.4 has bumped to GPLv3+
- add gperf.inc for common lines
- instead of duplicating acinclude.m4 in every subdirectory, use " -I ${S}" to
ensure acinlude.m4 successfully found by m4_include
Kevin Tian [Tue, 13 Jul 2010 08:46:46 +0000 (16:46 +0800)]
apmd: upgrade to 3.2.2-14
[Patches]
KEEP _unlinux.patch_: remove reference to build system paths
DISABLE _libtool.patch_: this patch adds a "--tag=CC" to be compatible with libtool2.2.4.
however with latest 2.2.10 libtool, w/o this patch it still works. From
the manual, CC is the default tag actually. So disable it for now, and once
same error happens again, it'll be re-neabled and if necessary push to upstream
DISABLE _workaround.patch_: a SIGUSR1 is hooked to signal suspend event as a so-called 'workaround'.
however no exact commit is found for exact usage case. So disable it.
REMOVE _debian.patch_: in upstream
Jeff Dike [Wed, 21 Jul 2010 17:20:40 +0000 (13:20 -0400)]
libproxy: Disabled webkit support
This package changed from autoconf to cmake during the last recipe
upgrade. This made the existing EXTRA_OECONF, which disabled wekbit
support among other things, non-functional, which in turn, broke the
build.
This patch disables webkit in a CMAKE way by adding EXTRA_OECMAKE to
the cmake class description, and setting it to "-DWEBKIT=no" in the
libproxy recipe and also reproduces the EXTRA_OECONF settings.
