Martin Jansa [Thu, 24 May 2012 14:09:11 +0000 (16:09 +0200)]
wpa-supplicant: add wpa_supplicant.conf to CONFFILES and don't install it twice
* first we install ${WORKDIR}/wpa_supplicant.conf-sane
install -m 600 ${WORKDIR}/wpa_supplicant.conf-sane ${D}${sysconfdir}/wpa_supplicant.conf
and a bit later in do_install we were overwritting it with ${WORKDIR}/wpa_supplicant.conf
install -m 644 ${WORKDIR}/wpa_supplicant.conf ${D}${sysconfdir}
* notice that this patch also changes .conf permissions from 644 back to 600
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Robert Yang [Thu, 24 May 2012 09:08:53 +0000 (17:08 +0800)]
oe/process.py: remove it since it is unused and duplicated
The meta/lib/oe/process.py is only used by oe_run and oe_popen in
meta/classes/utils.bbclass, and they will be removed, we have a better
one: bitbake/lib/bb/process.py, which can replace of it.
[YOCTO #2489]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Paul Eggleton [Thu, 24 May 2012 16:06:12 +0000 (17:06 +0100)]
opkg-nogpg: add file path
There was no explicit path in FILESPATH for this recipe to allow it to
find files referred to in SRC_URI (files shared with the standard opkg
recipe). This problem may have been masked by the fetcher behaviour of
looking for files last in DL_DIR, thus if opkg has been fetched
beforehand there would have been no error.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Mihai Lindner [Sun, 20 May 2012 13:17:32 +0000 (13:17 +0000)]
sudo: fixed wrong `chmod` path
Placed $D between braces ${D} to be correctly expanded to the
workdir path, instead of a path relative to host rootfs.
Currently, bitbake sudo fails on host systems where sudo is not
installed.
Signed-off-by: Mihai Lindner <mihaix.lindner@linux.intel.com>
Richard Purdie [Thu, 24 May 2012 10:02:53 +0000 (11:02 +0100)]
bitbake.conf: Improve wget timeouts
The wget default is a 900 second timeout and 20 retries. This is way too long
for most of our usecases so this patch changes it to a 30 second timeout and
reduces retries from 5 to 2. We have good mirror infrastructure, this will
let us fall back to it easier.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Saul Wold [Tue, 22 May 2012 22:24:13 +0000 (15:24 -0700)]
qemu: disable vnc-jpeg compression
This is disabled by default to ensure a deterministic build, qemu
configure would sometimes detect the libjpeg and then enable this.
Since mostly qemu is used locally disable by default.
Saul Wold [Fri, 11 May 2012 17:13:06 +0000 (10:13 -0700)]
qemu.inc: Remove mesa-xlib as PREFERRED_PROVIDER
The xserver-xorg uses and depends on mesa-dri, so we should
use the default PREFERRED_PROVIDER of libgl as mesa-dri.
This resolves the following:
ERROR: Multiple .bb files are due to be built which each provide virtual/libgl (/intel/poky/distro/meta/recipes-graphics/mesa/mesa-dri_7.11.bb /intel/poky/distro/meta/recipes-graphics/mesa/mesa-xlib_7.11.bb).
This usually means one provides something the other doesn't and should.
Khem Raj [Tue, 1 May 2012 05:01:24 +0000 (22:01 -0700)]
qemumachines: Enable xserver-xorg as default xserver
For qemux86 and qemux86-64 include qemu.inc after defining XSERVER
XSERVER variable is also weakly defined in task-core-x11.bb
which means we can not use ??= otherwise when building any qemu image
that uses task-core-x11.bb will get the wrong definition
So we define the XSERVER common set for qemu in qemu.inc
and as we know x86 and x86-64 qemu overrides the default
we include qemu.inc after that definition which means that
qemux86 and qemux86-64 get their own definitions and other
qemus get the definitions from qemu.inc. other non-qemu machine
will get their defintion from task which points to kdrive
as of now.
Samuel Stirtzel [Wed, 23 May 2012 13:46:28 +0000 (15:46 +0200)]
valgrind: Enable valgrind for armv7
Valgrind supports the armv7 architecture, this patch allows armv7 users to build and use Valgrind
This patch was run-tested on a Gumstix Overo (armv7a cortex-a8)
* The test consisted of running valgrinds memcheck (memory leakage detection),
* and callgrind (profiling) on a Qt 4 application
Signed-off-by: Samuel Stirtzel <s.stirtzel@googlemail.com>
Joshua Lock [Wed, 23 May 2012 23:22:12 +0000 (16:22 -0700)]
sanity.bbclass: add extra information when SSTATE_CACHE unusable
If the user does not have write permissions to SSTATE_CACHE, detected by
the check_create_long_filename() test failing with a "Permission denied"
value in strerror, then suggest they might want to use the location as
an entry in SSTATE_MIRRORS.
Joshua Lock [Wed, 23 May 2012 22:16:19 +0000 (15:16 -0700)]
sanity.bbclass: copy the data store and finalise before running checks
At the ConfigParsed event the datastore has yet to be finalised and thus
appends and overrides have not been set.
To ensure the sanity check is being run against the configuration values
the user has set call finalize() on a copy of the datastore and pass that
for all sanity checks.
Joshua Lock [Wed, 23 May 2012 20:50:38 +0000 (13:50 -0700)]
Revert "sanity.bbclass: check user can read and write to SSTATE_DIR"
This has caused problems for several users, including the Yocto Project
autobuilder. Since the message was added in order to be more user friendly
revert the change.
* Deleting .pyo files causes them to get compiled on the target.
* First boot gets *really* slow for python based projects.
* No space gets saved on the target.
* The package manager doesn't know about the files and
therefore fails to uninstall them, occupying space and causing
uninstalled python scripts to remain executable.
* It's inconsistent, because python itself and autotools based
projects already ship .pyo files.
* Probably .pyo files were deleted because .pyc files were
available earlier, but this has changed and OE-Core's python
now only generates optimized .pyo files. Deletion of .pyo was
introduced in 2008, python/04-default-is-optimized.patch
was introduced in 2009.
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
* Read /proc/mounts only once.
* Support many more network filesystem types.
* Remaining differences to netbase 4.47:
- Uses the mountvirtfs keyword instead of mountkernfs
- Doesn't use lsb functions
- Doesn't print a warning if /etc/network/options exists
- Doesn't use --exclude parameter for ifup, because
busybox doesn't support it.
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Enrico Scholz [Sun, 20 May 2012 17:54:37 +0000 (19:54 +0200)]
libtool: fixed parallel build related race
While building libtool, the libtool script itself will be regenerated
because OE modifies a dependency[1]. With -jX, this operation (-->
removal, creation of non-x file, 'chmod a+x') can happen at a time when
the script is going to be executed. This can cause errors like:
I am not sure whether the custom do_compile_prepend() is still needed.
For now only the issue above will be fixed by executing ./config.status
yet again.
Xiaofeng Yan [Mon, 21 May 2012 06:59:22 +0000 (14:59 +0800)]
ncurses: Avoid occasional builling failure when having parallel processable task
ncurses failure non-gplv3 build (race issue) like the following \
error information:
| tic: error while loading shared libraries: /srv/home/pokybuild \
/yocto-autobuilder/yocto-slave/nightly-non-gpl3/build/build/tmp/\
work/x86_64-linux/ncurses-native-5.9-r8.1/ncurses-5.9/narrowc/lib\
/libtinfo.so.5: file too short
| ? tic could not build /srv/home/pokybuild/yocto-autobuilder/\
yocto-slave/nightly-non-gpl3/build/build/tmp/work/x86_64-linux/\
ncurses-native-5.9-r8.1/image/srv/home/pokybuild/yocto-autobuilder\
/yocto-slave/nightly-non-gpl3/build/build/tmp/sysroots/x86_64-linux\
/usr/share/terminfo
| make[1]: *** [install.data] Error 1
This is a race issue which is caused by
install.libs and install.data:
1) install.data needs run tic
2) tic needs libtinfo.so
3) install.libs would regenerate libtinfo.so
4) but install.data doesn't depend on install.libs, and they can run
parallelly
So there would be errors in a very critical condition: tic is begining
to run at the same time when install.libs is generating libtinfo.so, and
this libtinfo.so is not integrity, then there would be the above error.
Let task install.libs run before install.data for fixing this bug.
[YOCTO #2298]
Signed-off-by: Xiaofeng Yan <xiaofeng.yan@windriver.com>
Robert Yang [Wed, 23 May 2012 05:55:39 +0000 (13:55 +0800)]
rpm 5.4.0: respect to the arch when choose the alternatives
There is a bug if we:
1) bitbake diffutils with MACHINE=crownbay
2) bitbake diffutils with MACHINE=qemux86
3) bitbake core-image-sato with MACHINE=crownbay
Then the diffutils.i586 would be installed to the crownbay's image, this
is because diffutils.i586 is newer than diffutils.core2, and rpm doesn't
respect to the arch priorities:
Fix rpm to respect to the order, for example, if it finds a pkg in both
core2/ and i586/, and the core2/ comes first, it should not use the one
in i586/ even if it's build time is newer.
Note: Don't worry about the _free(*ptr), it can check whether ptr is
NULL or not.
This is for the denzil branch, and the master branch also needs it.
[YOCTO #2360]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Paul Eggleton [Mon, 21 May 2012 15:56:15 +0000 (16:56 +0100)]
classes/base: add checksum file list at parse time
Connect the new fetcher file checksum code so that we get a list of the
files to be checksummed at parse time.
The file-checksums flag will not be read unless we are using a version
of BitBake that supports the function we call within it, so it is safe
to include this change even when the metadata will still be used with
older versions of BitBake.
Implements [YOCTO #2044].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Khem Raj [Thu, 10 May 2012 20:58:43 +0000 (13:58 -0700)]
xserver-xorg: Fix build for mips64
mips64 N64 ABI has different size for int and pointer
which means the compiler will complain about conversions
which works fine for 32 bit since sizes are same.
amd64 is taken care of already so we take care of mips64
with this patch by understanding the difference in sizes
in compiler.h
Add mips64 to binary locale arches
Enabling ports in addons causes wrong
machtype to be chosen for mips64 and
it always chose mips32 which is wrong
for mips64 so enable all the addons
we have and we were enabling them anyway
Mark Hatle [Fri, 18 May 2012 14:18:19 +0000 (17:18 +0300)]
sstate.bbclass: Make sure we don't have an empty fixmepath file
Jason Wessel noticed that a package without any fixmepath entries would
generate a sed warning about no input files. This patch resolves that
by ensuring that an empty fixmepath file never gets written into the
sstate archive. Also we avoid a second message by only doing xargs if
we got input.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Gary Thomas [Fri, 18 May 2012 14:18:18 +0000 (17:18 +0300)]
xserver-kdrive: Fix X server on PowerPC when built with GCC 4.7.x
Newer versions of GCC uncovered illegal code practice which can cause
runtime failures in the Xext/xace.c code. This problem has been fixed upstream:
http://cgit.freedesktop.org/xorg/xserver/patch/Xext/xace.c?id=6dae7f3792611aace1df0cca63bf50c50d93de43
Subject: xace: Invalid reference to out-of-scope data.
Incorporate this patch into the recipe, with a PR bump.
Signed-off-by: Gary Thomas <gary@mlbassoc.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
