db28bb1e7a68 async: export current_is_async() e89355d51cc4 PM / runtime: Add new helper for conditional usage count incrementation dcf8de0931b1 ALSA: hda - hdmi defer to register acomp eld notifier da1bcdb4415e ALSA: hda - Allow i915 binding later in codec driver fb95901a1724 ALSA: hda - Enable audio component for old Intel PCH devices 0a082020f0c4 ALSA: hda - Autosuspend controller after probe even if codecs are already suspended 7f7608752b37 ALSA: hda - hdmi add wmb barrier for audio component 7a32403bb06f ALSA: hdac: add snd_hdac_ext_bus_link_power_up_all 0d593c9fcf75 ALSA: hdac: Add support for hda DMA Resume capability e453b7e42563 ALSA: hdac: structure definition for ext_dma_params da5b15cea3a0 drm/edid: Add API to help find connection type 723224e90dfe ASoC: hdac_hdmi: Fix codec power state in S3 during playback 006d407c400d ASoC: hdac_hdmi: Fix to use dev_pm ops instead soc pm 149316f63e17 ASoC: hdac_hdmi: Add broxton device ID f94dc80e4ac5 ASoC: hdac_hdmi: Fix infoframe programming 623b2f9b33f1 ASoC: hdac_hdmi: Add PM support 9d0c9e8114f8 ASoC: hdac_hdmi: Fix to reconfigure registers in runtime resume 4afb4f7a3760 ASoC: hdac_hdmi: Don't fail in dai startup to make userland happy ec497d3f13c3 ASoC: hdac_hdmi: Enable playback on all enumerated ports d94da5c4fe3b ASoC: hdac_hdmi: Apply constraints based on ELD 401a43cac5a4 ASoC: hdac_hdmi: Fix to wait for D3 before powering off codec 69fd08bfd8a8 ASoC: hdac_hdmi: Fix to keep codec power active during enumeration. fe945a86a8c8 ASoC: hdac_hdmi: Fix possible memory leak in hw_params 2e2a20f383c4 ASoC: hdac_hdmi: Remove 'edev' NULL check 9f781dd80b54 ASoC: hdac_hdmi: Add infoframe support for dp audio b8110510884a ASoC: hdac_hdmi: Add jack reporting 1cdebc2d6e78 ASoC: hdac_hdmi: Create widget/route based on nodes enumerated 73b4b1dc5b63 ASoC: hdac_hdmi: create dais based on number of cvts e59b34525953 ASoC: hdac_hdmi: Enable DP1.2 and all converters/pins 760989e722ef ASoC: hdac_hdmi: Add hotplug notification and read ELD 30364a5601ae ASoC: hdac_hdmi: remove unused hdac_hdmi_query_pin_connlist 2764583d744e ASoC: hdac_hdmi: Use list to add pins and converters 9458ca02aa7e ASoC: hdac_hdmi: Fix to warn instead of err for no connected nids 477a88699c5e ASoC: hdac_hdmi: Fix to check num nodes correctly acdc6421f720 ASoC: hdac_hdmi: use dev_to_hdac_dev and to_ehdac_device bd4ba9cdf188 ASoC: hdac_hdmi: check error return b6898f18eaca ASoC: hdac_hdmi: fix possible NULL dereference 4836a9c5bc4e ASoC: hdac_hdmi: Use i915 component framework for PM c70f3eab8f81 ASoC: hdac_hdmi: Setup and start infoframe f0f09f63f4f5 ASoC: hdac_hdmi: Add hdac hdmi dai ops 4bab2c42e58a ASoC: hdac_hdmi: Add PM support for HDMI d1237b8c1a21 ASoC: hdac-hdmi: Add hdmi driver 0e0a7bb86eb8 mei: me: add broxton pci device ids 2af333b2beee usb: xhci: applying XHCI_PME_STUCK_QUIRK to Intel BXT B0 host 7ae2e3bce771 dmaengine: idma64: set maximum allowed segment size for DMA 53e822a3c638 dmaengine: idma64: drop IRQ enable / disable in handler 97e4071b6885 spi: pxa2xx: Fix too early chipselect deassert 46cc317c74dd i2c: designware: remove redundant lock 03a6b1c85e0a i2c: designware: Prevent runtime suspend during adapter registration d5da4042ad5b mmc: sdhci-pci: Add support and PCI IDs for more Broxton host controllers c3d97cf9fe19 mmc: sdhci-pci: Do not set DMA mask in enable_dma() f20ad778b58e mmc: sdhci-pci: Do not default to 33 Ohm driver strength for Intel SPT ca9a77c6869b mmc: sdhci: Fix override of timeout clk wrt max_busy_timeout 74982dc84940 mmc: sdhci-acpi: Fix card detect race for Intel BXT/APL 8017269a25bf mmc: sdhci-pci: Fix card detect race for Intel BXT/APL b532b30c3e41 mmc: sdhci: Allow override of get_cd() called from sdhci_request() 9e96c0c00221 mmc: sdhci: Allow override of mmc host operations 0148b3601f29 gpio-pca953x: fix the "drive" property cannot read/write
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Wed, 13 Apr 2016 16:12:09 +0000 (12:12 -0400)]
linux-yocto/4.4: gpio-pca953x: fix the "drive" property cannot read/write
The gpio_drive_show/store use incorrect gpio_desc,
this causes the drive sysfs property cannot be used,
This patch fixes this issue
Upstream-status: Inappropriate, custom code for legacy userspace
Signed-off-by: Yong Li <yong.b.li@intel.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Dan McGregor [Wed, 13 Apr 2016 22:17:56 +0000 (16:17 -0600)]
package.bbclass: improve permission handling
Change fs_link_table to be keyed by path, just like fs_perms_table.
When a new entry is coming in for either table, remove any previous
entry for that path. This way later permission file entries override
earlier ones.
[YOCTO #9430]
Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Wed, 6 Apr 2016 05:34:25 +0000 (22:34 -0700)]
fs-perms.txt: fix ROOT_HOME's permission
It should be 0700 rather than 0755.
Reported-by: Charles Chan <charles.wh.chan@gmail.com> Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
gcc-common.inc: String format tweak for available tunes
Small change to python string formatting for error logging.
Previously, tune and availtunes would print out at the end of
the log message. This change allows them to print out in the
correct locations of the error string.
Signed-off-by: noel eck <kceleon@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Andre McCurdy [Tue, 12 Apr 2016 00:28:27 +0000 (17:28 -0700)]
pbzip2: fix LIC_FILES_CHKSUM following 1.1.12 -> 1.1.13 upgrade
The 1.1.3 update to COPYING changes a reference to pbzip2's version
number and release date. LIC_FILES_CHKSUM should have been updated
accordingly as part of the 1.1.12 -> 1.1.13 upgrade:
Andre McCurdy [Tue, 12 Apr 2016 00:28:28 +0000 (17:28 -0700)]
pbzip2: don't skip do_configure
Although pbzip2 itself doesn't require any configuring, skipping
do_configure means the 'make clean' step performed by the default
base.bbclass do_configure is skipped too, which means that pbzip2
may not be rebuilt if something it depends on has changed (e.g. if
libbz2 has been modified).
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Kai Kang [Tue, 12 Apr 2016 06:24:03 +0000 (14:24 +0800)]
useradd_base.bbclass: remove flock option '-w'
Option '-w 100' of flock is failsafe to finish if dead lock occurs. It
should be impossible to occur dead lock. And option '-w' is not
supported by busybox, so remove it.
[YOCTO #9371]
Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Jussi Kukkonen [Tue, 12 Apr 2016 08:14:22 +0000 (11:14 +0300)]
matchbox-keyboard: Hide desktop launcher
Add patch that hides the keyboard desktop launcher, remove patch that
tries and fails to make the keyboard a single-instance application.
The desktop launcher of matchbox-keyboard is a source of far more
problems than solutions: As an example there's supposed to be only
one instance running at a time but we give the user several ways to
start multiple instances (and the Matchbox WM Single-Instance
implementation is broken by both design and implementation).
After this patch the only instance of matchbox-keyboard is the
daemonized one that can be shown/hidden with the panel applet (when
there is not hardware keyboard). If an additional matchbox-keyboard
needs to be started for debug reasons, it can still be done from
command line.
Fixes [YOCTO #3093].
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Sona Sarmadi [Wed, 13 Apr 2016 06:32:15 +0000 (08:32 +0200)]
bind: CVE-2016-1285 CVE-2016-1286
Fixes following vulnerabilities:
CVE-2016-1285 bind: malformed packet sent to rndc can trigger assertion failure
CVE-2016-1286 bind: malformed signature records for DNAME records can
trigger assertion failure
References to the Upstream commits and Security Advisories:
===========================================================
CVE-2016-1285: https://kb.isc.org/article/AA-01352
https://source.isc.org/cgi-bin/gitweb.cgi?p=bind9.git;a=patch;
h=70037e040e587329cec82123e12b9f4f7c945f67
Bill Randle [Tue, 12 Apr 2016 22:10:52 +0000 (15:10 -0700)]
image.bbclass: add DEB_{PRE, POST}PROCESS_COMMANDS to rootfs_command_variables list
Remove duplicate ROOTFS_POSTPROCESS_COMMAND in the rootfs_command_variables list.
Add DEB_PREPROCESS_COMMANDS and DEB_POSTPROCESS_COMMANDS to rootfs_command_variables
list for consistency with the RPM_ and OPKG_ versions of those variables.
Note: the package manager specific pre and post process commands
may removed entirely in Yocto 2.2 or later.
Signed-off-by: Bill Randle <william.c.randle@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Bill Randle [Tue, 12 Apr 2016 22:10:51 +0000 (15:10 -0700)]
rootfs.py: apply ROOTFS_POSTINSTALL_COMMAND to all package formats
Previously, ROOTFS_POSTINSTALL_COMMAND was run only after the opkg rootfs
install post processing phase. This patch makes it generic so it is run fter
any package manager specific rootfs post processing, but before _run_intercepts().
[YOCTO #9248]
Signed-off-by: Bill Randle <william.c.randle@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Robert Yang [Wed, 13 Apr 2016 09:10:15 +0000 (02:10 -0700)]
buildtools-tarball.bb: set TOOLCHAIN_NEED_CONFIGSITE_CACHE to null
buildtools-tarball doesn't need config site, set
TOOLCHAIN_NEED_CONFIGSITE_CACHE to null so that no target recipes will
be built when bitbake buildtools-tarball.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Markus Lehtonen [Wed, 13 Apr 2016 14:40:04 +0000 (17:40 +0300)]
rpm: more verbose errors in rpmTempFile
This patch adds better error logging inside the rpm tempfile function in
order to be able to better analyze a rare and very hard-to-reproduce
failure in oe-selftest for rpm signing.
[YOCTO #9416]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Wed, 13 Apr 2016 11:14:23 +0000 (12:14 +0100)]
rootfs-postcommands: handle broken links when writing manifest
If the manifest link is broken then os.path.exists() returns False so the link
isn't removed, resulting in the os.symlink() call failing as the file already
exists. Prevent this by using os.path.lexists to check that the symlink itself
exists, not the target.
Signed-off-by: Ross Burton <ross.burton@intel.com>
musl calls them __c_ispeed and __c_ospeed
and we can not use get/set APIs because the get APIs
will return the value from iflags and not from *speed
element from termios struct
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Maxin B. John [Tue, 12 Apr 2016 11:05:12 +0000 (14:05 +0300)]
kbd: remove uclibc-stdarg.patch
Remove uclibc-stdarg.patch as it is already available in kbd 2.0.3
release.
commit id: b8ef7897867cb1ba1b9f87d004674133c291b1b0
Author: Mike Frysinger <vapier@gentoo.org>
Date: Mon Jan 6 10:27:56 2014 -0500
libkeymap: include stdarg.h where used
Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Tue, 12 Apr 2016 06:36:43 +0000 (23:36 -0700)]
linux-yocto-tiny: fix KBRANCH
Fixed:
WARNING: linux-yocto-tiny-4.4.3+gitAUTOINC+770996a263_73481a3abd-r0 do_patch: After meta data application, the kernel tree branch is standard/tiny/common-pc. The
WARNING: linux-yocto-tiny-4.4.3+gitAUTOINC+770996a263_73481a3abd-r0 do_patch: SRC_URI specified branch standard/tiny/base. The branch will be forced to standard/tiny/base,
WARNING: linux-yocto-tiny-4.4.3+gitAUTOINC+770996a263_73481a3abd-r0 do_patch: but this means the board meta data (.scc files) do not match the SRC_URI specification.
WARNING: linux-yocto-tiny-4.4.3+gitAUTOINC+770996a263_73481a3abd-r0 do_patch: The meta data and branch standard/tiny/base should be inspected to ensure the proper
WARNING: linux-yocto-tiny-4.4.3+gitAUTOINC+770996a263_73481a3abd-r0 do_patch: kernel is being built.
Use standard/tiny/common-pc which is pointed by the .scc to fix problem.
Btw, standard/tiny/base and standard/tiny/common-pc points to the same
commit id.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Tue, 12 Apr 2016 17:04:22 +0000 (18:04 +0100)]
lib/oe/lsb: sanitise the distro identifier
The distribution identifier is often used to create filenames, so it needs to be
safe to use as a filename. Whilst most distributions have e.g. Fedora or Debian
as their name, it is possible that the name contains special characters.
To ensure this doesn't cause a problem strip out any non-alphanumerics from the
distribution name before returning it.
[ YOCTO #9443 ]
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bill Randle [Tue, 12 Apr 2016 15:22:21 +0000 (08:22 -0700)]
package.bbclass: handle links in sorted order
When processing links, the directories are processed in unsorted order
which can result in cases like /var/lock -> /run/lock handled before
/var/run -> /run throwing an error for /var/run because /run already exists.
Change the link processing to ensure links are processed in sorted order of
the destination.
[YOCTO #9430]
Signed-off-by: Bill Randle <william.c.randle@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
toaster.bbclass: improve package information collection
The PACKAGES variable doesn't include all packages potentially
generated by a recipe, not least of all because it doesn't include
dynamic packages created via do_split_packages() or similar.
Instead of trying to guess which packages were generated, walk
${PKGDESTWORK}/runtime to find all package information that was
written to disk. This allows us to read all information for the
complete list of packages generated by the recipe.
For example before this patch we get SinglePackageInfo events for
9 packages from ncurses. With the patch applied we get 20 events
for all of the packages created during an ncurses build.
As a bonus we also switch to using the same postfuncs for both
do_packagedata and do_packagedata_setscene as they each result
in a PKGDESTWORK with the relevant directories and files
created.
[YOCTO #9115]
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Elliot Smith <elliot.smith@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Tue, 12 Apr 2016 14:51:54 +0000 (15:51 +0100)]
rsync: remove upstream's rebuild logic
Upstream some well intended but broken logic to reimplement the rebuild
functionality of automake. However this isn't out-of-tree safe and quite basic,
which means if it ever does execute (say, configure.ac or aclocal.m4 is touched)
then the build fails.
As we delete ${B} and re-run autoreconf on every build this is redundant, so
just delete it all.
[ YOCTO #9445 ]
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Tue, 12 Apr 2016 14:51:52 +0000 (15:51 +0100)]
rsync: don't install acinclude.m4
This acinclude.m4 was actually a stale copy of upstream's generated aclocal.m4.
This generates correctly now, so there isn't a need to install this by hand
anymore.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Tue, 12 Apr 2016 14:51:50 +0000 (15:51 +0100)]
Revert "wic/utils/partitionedfs.py: assemble .wic images as sparse files"
It turns out that dd's conv=sparse doesn't look at the file extents, but simply
checks if a "block" is all zero. If the block of zero was meaningful it gets
lost and if the image is subsequently written to media using a sparse-aware
writer then the block of zeros won't be written at all.
Richard Purdie [Tue, 12 Apr 2016 14:44:08 +0000 (15:44 +0100)]
archiver: Ensure sstate-inputdir directory is created
Without this, do_archive_sources will fail for the gcc tasks where there is
common source and the other tasks are not added as dependencies. The failure
happens when trying to restore these tasks from sstate.
To fix this ensure the sources directory is created as expected by the
sstate code.
[YOCTO #9433]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jussi Kukkonen [Mon, 11 Apr 2016 11:07:52 +0000 (14:07 +0300)]
glib-2.0: Put glib-compile-schemas back in -utils
Commit cc97d576 moved a bunch of development tools to the -dev
package. glib-compile-schemas is actually used in postinst by
gsettings.bbclass so it needs to be available on target at package
install time: Move the tool back to glib-2.0-utils which
gsettings.bbclass depends on.
Fixes [YOCTO #9431].
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Mon, 11 Apr 2016 17:33:16 +0000 (18:33 +0100)]
oeqa/selftest/sstatetests: split 32/64 build host from no-op action tests
As more variables were being added it made sense to split this test into two:
one quick test that verifies that the host being 32-bit or 64-bit doesn't impact
the hashes, and another which compares stamps for two builds with several
variables changed and classes inherited.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Mon, 11 Apr 2016 20:43:34 +0000 (21:43 +0100)]
util-linux: take ownership of hwclock if installed
Previously util-linux had a lower priority for hwclock than busybox but the
reasoning was lost in the mists of time, with just this enigmatic comment
remaining:
There seems to be problem, atleast on nslu2, with these, until they are
fixed the busybox ones have higher priority.
Chasing the comment back through history it first appeared in the following
oe-classic commit:
ac_cv_sizeof_off_t was previously in the site cache files, which was breaking
large file support and required a workaround in each recipe that actually wanted
to use large files.
Now that the entry has been removed from the site cache, we can remove the
workarounds.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sat, 9 Apr 2016 22:16:47 +0000 (23:16 +0100)]
archiver: Fix ASSUME_PROVIDED issues
Currently the dependencies injected by this class for recipes in ASSUME_PROVIDED
e.g. tar-native or chrpath-native are ignored. We need to use their "replacement"
names, e.g. tar-replacement-native.
This avoids broken archives and sstate failures with these recipes.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
build-appliance-image: Support for VirtualBox guest additions
Add support for VirtualBox guest additions.
The additions are built inside the Build Appliance VM.
For this to be possible, the environment for out-of-tree kernel module builds
must be present and set up properly.
A README file with detailed steps on how to build the guest additions is placed
in the home directory of the user "builder" as well.
The main purpose of the guest additions is to allow sharing folders between
the host and Build Appliance VM.
[YOCTO #8073]
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
local.conf.sample: Make it possible to override EXTRA_IMAGE_FEATURES
It should be possible to override EXTRA_IMAGE_FEATURES in auto.conf,
which is read before local.conf.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
oeqa/selftest/wic: add test case for sparse images
Add a testcase to build a directdisk image and check that the
used disk size is less than the apparent size, as wic now
assembles images as sparse files.
Signed-off-by: Joshua Lock <joshua.lock@collabora.co.uk> Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we create hdddirect in the first time, and run bitbake to create
vmimg in the second time, then the previouse created
${IMAGE_LINK_NAME}.hdddirect may can not be found since it contains the
data string which are different. Use IMAGE_LINK_NAME to fix the problem.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Fri, 8 Apr 2016 07:15:19 +0000 (00:15 -0700)]
image_types.bbclass: set nodesize for btrfs
The default value is 16K which is too big to create image for
core-image-minimal:
rootfs.btrfs is too small to make a usable filesystem
Minimum size for each btrfs device is 41943040.
Use 4K as ext2/3/4 to fix the problem.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mark Asselstine [Fri, 8 Apr 2016 21:46:27 +0000 (17:46 -0400)]
useradd_base.bbclass: prevent variable expansion in $opts
Many user/group operations will involve hashes which will include '$'
followed by a number or even possibly an env. variable name. Passing
$opts to flock requires that we take additional precautions to prevent
the unexpected expansion of these instances.
This was found by an image which used usermod operations to set the
password hash for root. The image could not be logged-in to and
examining /etc/shadow clearly showed that $0 and other $* variables
had been expanded unexpectedly. This change returnes the behavior to
what existed prior to commit 2ebf697b46c42cee8bfa6d2e6087397f8cce385c
[useradd_base.bbclass: replace retry logic with flock].
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mark Asselstine [Fri, 8 Apr 2016 21:46:26 +0000 (17:46 -0400)]
extrausers.bbclass: drop retry count for perform_user/group* calls
Commit 2ebf697b46c42cee8bfa6d2e6087397f8cce385c [useradd_base.bbclass:
replace retry logic with flock] dropped the 3rd (retry) parameter for
these functions. These are simply being ignored now but we should
remove the retry count to avoid confusion.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Wed, 6 Apr 2016 12:20:29 +0000 (13:20 +0100)]
rpm: brace expansion is a bashism
The constuct rm *.{a,la} is a bashism and as tasks are run under /bin/sh this
may not work as expected. Expand the {a,la} to two separate calls, and remove
the architecture-specific macro deletion as they are not installed in the first
place anymore.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Andre McCurdy [Thu, 7 Apr 2016 00:42:05 +0000 (17:42 -0700)]
openssl.inc: minor packaging cleanup
libcrypto.so was explicitly added to FILES_${PN}-dev as part of moving
libcrypto from libdir -> base_libdir to support dhclient [1].
However, the line has been unnecessary since ${base_libdir}/lib*.so
files started to be included in FILES_${PN}-dev by default [2] (and
it's still unnecessary now, after moving libcrypto from back to libdir
to support ntp [3]).
Robert Yang [Thu, 7 Apr 2016 07:34:32 +0000 (00:34 -0700)]
apr-util: fix path in rules.mk for nativesdk
Fixed when build nativesdk-apr-util:
| gawk: fatal: can't open source file `/opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/share/build-1/make_exports.awk' for reading (No such file or directory)
The ${S} should be ${B}.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Thu, 7 Apr 2016 07:34:31 +0000 (00:34 -0700)]
bdwgc: installed-vs-shipped for nativesdk
Fixed:
ERROR: nativesdk-bdwgc-7.4.2-r0 do_package: QA Issue: nativesdk-bdwgc: Files/directories were installed but not shipped in any package:
/opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/share
/opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/share/gc
/opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/share/gc/porting.html
/opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/share/gc/gcinterface.html
/opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/share/gc/gcdescr.html
/opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/share/gc/README.solaris2
[snip]
This was caused by hardcode of datadir.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Thu, 7 Apr 2016 07:34:30 +0000 (00:34 -0700)]
libsolv: fix installed-vs-shipped for nativesdk
Fixed:
ERROR: nativesdk-libsolv-0.6.19-r0 do_package: QA Issue: nativesdk-libsolv: Files/directories were installed but not shipped in any package:
/opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/man
/opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/man/man3
/opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/man/man1
/opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/man/man3/libsolv-constantids.3
/opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/man/man3/libsolv.3
/opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/man/man3/libsolv-history.3
/opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/man/man3/libsolv-pool.3
/opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/man/man3/libsolv-bindings.3
/opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/man/man1/mergesolv.1
/opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/man/man1/testsolv.1
/opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/man/man1/installcheck.1
/opt/poky/2.0+snapshot/sysroots/x86_64-pokysdk-linux/usr/man/man1/dumpsolv.1
It checks ${CMAKE_INSTALL_PREFIX}/share/man when configure, but it may
not exist when crosscompile, for example, when CMAKE_INSTALL_PREFIX="/",
it is OK, but when CMAKE_INSTALL_PREFIX="/some/path/else", then it
doesn't exist, and the man dir would be set to "/usr/man" which is
incorrect.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ed Bartosh [Wed, 6 Apr 2016 17:00:42 +0000 (18:00 +0100)]
toaster: add DL_DIR and SSTATE_DIR to oe toasterconf
Add the DL_DIR and SSTATE_DIR to the toasterconf with defaults set
We now support per project sharing of the DL_DIR and SSTATE_DIR
in toaster.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Michael Wood <michael.g.wood@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ed Bartosh [Thu, 7 Apr 2016 13:11:46 +0000 (14:11 +0100)]
toaster.bbclass: strip task from the target
Current code in toaster_buildhistory_dump assumes that bitbake
target doesn't contain task name. It uses target as a part of
path to the files with data that it analizes. It fails to find
files if target contains task name. Stripping task from the
target should solve this.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Elliot Smith <elliot.smith@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jussi Kukkonen [Thu, 7 Apr 2016 11:49:44 +0000 (14:49 +0300)]
x11-common: Add PACKAGECONFIG for screen blanking
when "blank" is not in PACKAGECONFIG, explicitly set dpms and
screensaver off. The intention here is to make it easier to
create builds that should not blank the screen (just remove
"blank" from x11-common PACKAGECONFIG).
Also remove a unneeded "find -exec rm" from do_install.
Partly fixes [YOCTO #7278].
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Randy Witt [Thu, 7 Apr 2016 23:34:53 +0000 (16:34 -0700)]
devtool: Create unlocked-sigs.inc containing items in the workspace
When a recipe is added to the workspace, the signatures for the tasks
will change. This means that bitbake must be told to allow the
signatures to be different if they are in locked-sigs.inc.
This is done by creating an unlocked-sigs.inc file which contains all
the recipes in the workspace each time devtool reads the workspace.
So not only will necessary things get added, previously added items will
be removed by virtue of them no longer being in the workspace.
This also makes sure that the extensible sdk picks up unlocked-sigs.inc
as part of the configuration.
[YOCTO #9195]
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Randy Witt [Thu, 7 Apr 2016 23:34:52 +0000 (16:34 -0700)]
sstatesig.py: Add a method to "unlock" recipes
In order to support workflows using devtool where a user might want to
modify tasks that exist in locked-sigs.inc, there must be a way to unlock
recipes.
This patch adds that support by allowing the user to add recipes to
SIGGEN_UNLOCKED_RECIPES. Recipes that exist in that variable will have
all their tasks unlocked, as well as any tasks that depend on that
recipe.
For example if foo->bar->baz, if you unlock baz, it will also unlock bar
so that foo can be rebuilt without explicitly specifying bar as being
unlocked.
[YOCTO #9195]
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the extensible sdk we want there to be an error if a task tries to
run without signatures that match locked-sigs.inc. This patch enables
that error.
[YOCTO #9195]
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Randy Witt [Thu, 7 Apr 2016 23:34:49 +0000 (16:34 -0700)]
sstatesig.py: Split single locked sigs check into multiple checks
Add the SIGGEN_LOCKEDSIGS_TASKSIG_CHECK and
SIGGEN_LOCKEDSIGS_SSTATE_EXISTS_CHECK variables to replace
SIGGEN_LOCKEDSIGS_CHECK_LEVEL.
SIGGEN_LOCKEDSIGS_TASKSIG_CHECK will no control whether there is a
warning or error if a task's hash in the locked signature file doesn't match
the computed hash from the current metadata.
SIGGEN_LOCKEDSIGS_SSTATE_EXISTS_CHECK will control whther there is a
warning or error if a task that supports sstate is in the locked
signature file, but no sstate exists for the task.
Previously you could only have warning/errors for both controlled by
SIGGEN_LOCKEDSIGS_CHECK_LEVEL. This was an issue in the extensible sdk,
because we know sstate won't exist for certain items in the reverse
dependencies list for tasks. However, we still want to error if task
signatures don't match.
[YOCTO #9195]
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
image_types: use compress framework to produce checksums for images
Existing compress framework for producing various compressed versions
of images is powerfull enough to be extended for other uses, e.g. to
convert types of images.
It is possible to use it also to produce image checksums at the time
of image generation. This commit adds support for all supported
at the moment coreutils hashing algorithms: md5, sha1, sha224,
sha256, sha384 and sha512
Usage:
IMAGE_FSTYPES_append = " hddimg.sha256sum"
Signed-off-by: Alexander D. Kanevskiy <kad@kad.name> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Alexandru Moise <alexandru.moise@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Wed, 6 Apr 2016 02:31:27 +0000 (19:31 -0700)]
create-pull-request: fix for newer git
Fixed when git > 2.1.0:
$ ./scripts/create-pull-request -r HEAD^ -u contrib -b rbt/git
fatal: Not a valid revision: rbt/git
ERROR: git request-pull reported an error
This is because newer git requires both local and remote branch named as
rbt/git, but usually, we only named the remote branch as rbt/foo, and
foo for local branch.
Add a option '-l' to fix the problem, default is HEAD.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It hasn't been used since June 2015 when upgraded the recipe, this patch
was used for crosscompiling, now the crosscompile works well without it,
so remove it.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jussi Kukkonen [Wed, 6 Apr 2016 08:19:11 +0000 (11:19 +0300)]
ffmpeg: Make configure options explicit
Currently ffmpeg builds libraries that are packaged but never appear
in PACKAGES. Add PACKAGECONFIGs for all libraries, and make sure
PACKAGES_DYNAMIC lists all dynamic packages.
Default choice (build all except libavresample) does not change.
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Maxin B. John [Wed, 6 Apr 2016 09:20:31 +0000 (12:20 +0300)]
useradd.bbclass: remove user/group created by the package in clean* task
At present, if a recipe is built which creates users/groups via
useradd.bbclass, those users/groups are not removed from sysroot
when the recipe/package is cleaned using clean/cleansstate/cleanall
or when a recipe is rebuild and 'unstaged' from the the sysroot.
The "userdel_sysroot_sstate()" provides that functionality.
[YOCTO #9262]
Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
scripts/oe-selftest: avoid the creation of coverage file when coverage not installed
Coverage subprocessing file is being created even when coverage
is not installed, which causes errors of "module not found" to
be send to the oe-selftest output.
This patch adds indent to the block of code creating this coverage
file, so it can only be executed when coverage is actually
installed.
[Yocto #9334]
Signed-off-by: Humberto Ibarra <humberto.ibarra.lopez@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
scripts/oe-selftest: remove coverage file if any coverage option is given
Coverage temporal file for sub-processing is being removed only
when the --coverage option was found. This is wrong since the
file is created when any coverage option (source, include or omit)
is given, even if --coverage is not one of them.
This patch makes sure to remove the file if any coverage option was
given.
Signed-off-by: Humberto Ibarra <humberto.ibarra.lopez@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is a message that warns the user about enabling subprocessing
for coverage to work. After the fix for Yocto #8930,
this task is done automatically, so the warning is not needed
anymore.
Signed-off-by: Humberto Ibarra <humberto.ibarra.lopez@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Alex Franco [Tue, 5 Apr 2016 16:21:34 +0000 (11:21 -0500)]
patch.bbclass: remove useless path assignment
A path variable is assigned the value of PATH from the
environment, before the PATH is set on the environemnt
from the value of PATH in the bb datastore. This seems
to be an unnecessary leftover.
[YOCTO #8543]
Signed-off-by: Alex Franco <alejandro.franco@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
