Changing SDKMACHINE (which changes SDK_ARCH) shouldn't cause
target task signatures to change. Exclude the dependency
on SDK_ARCH for this reason. It only affects nativesdk builds
and those already account for SDK_ARCH in the build WORKDIR paths.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Tue, 29 Sep 2015 14:31:35 +0000 (10:31 -0400)]
kern-tools: fix multi-layer patch application
Updating the kern-tools SRCREV to import the following fix:
kgit-meta: resume after last applied patch
When the auto-resume (resume point detection) was removed from the
processing of a meta-series, it ignored the fact that a single patch
series may in fact be processed a number of times.
Two layers patching a kernel will generate two different runs on the
same branch, which always start at patch one. This will obviously
break with duplicate patches.
To avoid this, we simply track the last patch applied, and
explicitly
tell the patch scripts where to start. This gets us resume
functionality, without the overhead of resume point detection.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Tue, 29 Sep 2015 14:31:34 +0000 (10:31 -0400)]
linux-yocto/4.1: braswell bug fixes
Updating the 4.1 SRCREVs to integrate the following DRM backports:
a8abc111a96d drm/i915: Only wait for required lanes in vlv_wait_port_ready() 81354180432b Revert "drm/i915: Hack to tie both common lanes together on chv" d660fc117731 drm/i915: Work around DISPLAY_PHY_CONTROL register corruption on CHV 0e797e9cb717 drm/i915: Implement chv display PHY lane stagger setup
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Tue, 29 Sep 2015 14:31:32 +0000 (10:31 -0400)]
linux-yocto-rt/4.1: integrate axxia BSP
As part of the axxia preempt-rt integration, the preempt-rt
branch now becomes standard/preempt-rt/base, to allow proper
branch inheritance as: standard/preempt-rt/axxia/base.
No functional changes happen to the base -rt, just the default
KBRANCH changes.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gettext-0.16.1: kill target m4 macros from sysroot
This is aim for using gettext-native's macros(gettext-native-0.19.4),
but when we set:
PREFERRED_VERSION_gettext = "0.16.1"
And build the recipes like pcmanfm, we would get errors when
do_configure:
Khem Raj [Mon, 31 Aug 2015 06:15:34 +0000 (06:15 +0000)]
hostap-utils: Use C99 stddefs in defining local typedefs
The code is creating more abstract types which is nice however it should
be using standard defines from stdint.h and not random defines to base
its own type system
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update the NAME version tweak example patch for the
newer kernel. This moves the example to the 4.2 stable
kernel and appends -custom to the VERSION string.
Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently the logic to check if a test failed was
to check for an exception in the thread, but some
decorators used in the syslog runtime test would
generate and handle exceptions; this will mess
with the current check logic and will dump the
host and the target as if the test failed.
This patch changes the check logic to verify if
the test that just happend is in the failure test
list and dump the host and target accordingly.
[YOCTO #8406]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
CWAUTOMACROSPREFIX is ${D}${prefix} which is used as the prefix
of install dir and used to replace the path placeholder in script
autogen.sh, the former is correct but not for the later, we can
fix the Makefile to use two variables for this, but I think a sed
replacement would be fine since the package has not been in
development for a long time.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
oeqa/runexported: Fix a problem with ssh_target_log existing in folder.
When copying the exported tests to a remote machine ssh_target_log can
be transformed from softlink to file which will throw an error when
trying to run again.
Signed-off-by: Lucian Musat <george.l.musat@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
qemurunner: Sanitize output from qemu and qemu pid
Currently the output from qemu could contain control
or Unicode characters; having such characters in the
log will cause an internal server error when sending
the report to error reporting web. Control characters
can be found in the command line used to run quemu too.
This change sanitize the output from qemu and the
command line used to run qemu, this way the logs doesn't
contain control or Unicode characters and this will solve
the issue of error reporting web and generate better
logs.
The only Unicode character found in the qemu output
is the copyright symbol, it really doesn't interfer
removing Unicode characters with debugging.
[YOCTO #8225]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Mon, 28 Sep 2015 08:18:42 +0000 (01:18 -0700)]
python-async: inherit setuptools
Fixed when bitbake nativesdk-python-async:
DEBUG: Executing shell function do_compile
Traceback (most recent call last):
File "setup.py", line 2, in <module>
from setuptools import setup
ImportError: No module named setuptools
Replace distutils with setuptools will fix the problem.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
util-linux: add runuser PAM config files to fix runuser error
The runuser command fails with below error message, add proper PAM
config files to fix the problem. The config files are borrowed from
CentOS 7.0 release.
runuser: Failure setting user credentials
Signed-off-by: Shan Hai <shan.hai@windriver.com> Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
oeqa/decorators: Fixed a problem with decorator logs link.
When not doing actual tests with testimage, like for example
exporting tests, the link to the log file was still created
although the actual log file was not existent. Fixed it by
moving the link creation part into the run() method.
Signed-off-by: Lucian Musat <george.l.musat@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Tue, 29 Sep 2015 12:43:45 +0000 (13:43 +0100)]
toolchain-shar-extract: Correct environment-setup script names for multilib
Currently a lib32-core-image-* SDK prints an incorrect environment-setup-*
file name when installing the SDK. Instead of printing the wrong thing, list
the environment setup files present in the SDK.
As it happens this fixes the message printed with buildtools-tarball too
which someone reported to me about the same time as I finished this patch!
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Alex Franco [Fri, 25 Sep 2015 21:03:05 +0000 (16:03 -0500)]
lsb: add lsbinitscripts and util-linux rdepends
Building a base image such as core-image-minimal with lsb and then
attempting to source /lib/lsb/init-functions, then using the start
_daemon function (to start a daemon, such as syslogd) fails, since
/lib/lsb/init-functions use functions (incl. "daemon()") from file
/etc/init.d/functions.lsbinitscripts, which is provided by package
lsbinitscripts.
Running daemon() then calls /usr/bin/mountpoint, which is provided
by util-linux.
So, lsbinitscripts has been added as an RDEPENDency in lsb, and in
turn util-linux has been added to lsbinitscripts.
[YOCTO #7732]
Signed-off-by: Alex Franco <alejandro.franco@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jonathan Liu [Fri, 25 Sep 2015 23:35:21 +0000 (09:35 +1000)]
opkg: create opkg.lock in /run instead of /var/run
This avoids a "Could not unlink" warning when extracting a /var/run
symbolic link pointing to /run from the base-files package as it is
unable to unlink the /var/run directory when it contains opkg.lock.
This also fixes an issue where /var/run is created as a directory
instead of a symbolic link to /run.
Signed-off-by: Jonathan Liu <net147@gmail.com> Acked-by: Anders Darander <anders@chargestorm.se> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Mon, 28 Sep 2015 06:58:37 +0000 (23:58 -0700)]
toolchain-shar-relocate.sh: make it faster
Make the extrating faster by:
* Merge the two heavy "for .. find" loops into one
* Move the commands out of for loop rather than inside, this can reduce the
forking amount.
As a result, when install:
* buildtools-nativesdk-standalone: 14s -> 7s (50% saved)
* core-image-minimal-core2-64-toolchain: 56s -> 47s (17% saved)
[YOCTO #8404]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Mon, 28 Sep 2015 10:56:15 +0000 (11:56 +0100)]
populate_sdk_base: Simplify postprocess commands
When looking at and trying to build a slightly customised SDK, I
realised the code could be simplified and written in a way which was
more customisable.
This patch moves various function calls into the SDK_POSTPROCESS_COMMAND
which was intended for this kind of use.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Mon, 28 Sep 2015 10:53:35 +0000 (11:53 +0100)]
classes/meta: Add DISTRO_FEATURES check for gtk+/gtk3+
If you currently do a DISTRO_FEATURES_remove = "x11" with OE-Core, you
see failures due to dependency problems. The work in resolving this was
partially completed a while back. This adds in the markup mainly for
gtk/gtk3+ recipes and means "bitbake world" will work successfully.
Rather than code the gtk/gtk+ specific distro features into each recipe,
a shared variable is used.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Markus Lehtonen [Tue, 21 Apr 2015 12:30:35 +0000 (15:30 +0300)]
devtool: modify: make bitbake use local files from srctree
This change makes it possible to have local files (non-remote SRC_URI
files, i.e. files that are located in the "recipe space") under the
srctree even if S!=WORKDIR. The files must be placed under the
'local-files' subdirectory.
Complements the previous patch that imports local files into srctree.
[YOCTO #7602]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Markus Lehtonen [Thu, 23 Apr 2015 14:11:42 +0000 (17:11 +0300)]
devtool: better support for local source files
* extract: Copy all local source files (i.e. non-compressed/non-arcived
SRC_URI files that have file:// URI prefix) - excluding patches - to
the srctree repository. The files will be placed in a subdirectory
called 'oe-local-files'. The oe-local-files directory is not committed
to the Git repository, but, marked to be ignored by a .gitignore file.
The developer can manually add and commit the files to Git if the
changes to them need to be tracked.
Before this patch, local source files (were copied (and committed) to
the srctree repository only in some special cases (basically when
S=WORKDIR) when doing devtool-extract. For most of the packages local
files were not copied at all.
* update-recipe: This patch causes the local files to be 'synced' from
the srctree (i.e. from the 'oe-local-files' subdirectory) to the
layer. Being 'synced' means that in addition to copying modified
files over the original sources, devtool will also handle removing and
adding local source files and updating the recipe accordingly. We
don't want to create patches against the local source files but rather
update them directly. Thus, 'oe-local-file' directory is ignored in
patch generation when doing update-recipe, even if committed to Git.
This functionality is only enabled if the 'oe-local-files' directory
is present in srctree.
[YOCTO #7602]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Richard Purdie [Sat, 26 Sep 2015 17:12:17 +0000 (18:12 +0100)]
gdk-pixbuf: Only apply native cleaning in normal task, not setscene
The previous fix works well for normal tasks since the ordering is always
correct and gdk-pixbuf-native comes first. Setscene ordering is reversed
so we can't rely on this there. Remove the fix in that case since
it breaks more than it solves.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
oeqa/testimage: Remove absolute path to oeqa from json
In the json file the whole datastore is serialized which contains
absolute path to the oeqa folder. This breaks the functionality
when trying to run the tests from other machines.
Signed-off-by: Lucian Musat <george.l.musat@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Previously, the iproute2's configure script is actually run in the
do_compile stage. There's a Makefile rule 'all: Config' which makes
the configure process run to generate the Config file.
However, this makes it hard to fix the dependency problems. We need
to generate the Config file in the do_configure stage.
Add do_configure_append to separate the configure process from the
compile process.
Besides, explicitly disable ATM support for iproute2, otherwise we'll
sometimes meet errors like below when building.
ld: cannot find -latm
collect2: error: ld returned 1 exit status
Makefile:154: recipe for target 'q_atm.so' failed
make[1]: *** [q_atm.so] Error 1
Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
The ccargs obtained from get_tune_parameters may not be fully expanded,
so that the gcc_multilib_setup function can be confused, and generates
invalid MULTILIB_OPTIONS in GCC Makefile fragment, which will break the
multilib feature of target gcc.
To address problems above, this patch modifies gcc_multilib_setup
function to expand ccargs before use.
Upstream-Status: Inappropriate [configuration]
Signed-off-by: Yuanjie Huang <yuanjie.huang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Bruce Ashfield [Thu, 24 Sep 2015 22:17:54 +0000 (18:17 -0400)]
linux-yocto/4.1: rt update to 4.1.x-rt8
The -rt build suffered the same breakage in master as the standard
kernel builds: due to a bad git history merge, existing patches were
dropped from branches.
This meant that we were missing the -rt changes, which re-introduced
some failures with linux-yocto-rt.
With these SRCREV updates, we have the latest 4.1.x-rt and all
architectures build.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
busybox: Use CC instead of bare LD to be the Linker
This patch was on mailing list, another patch to make sure -r is not
passed directly but via -Wl switch is added.
This was exposed when using clang and gold linker, clang does not have
-r switch to do relocatable objects and problem happens specific to OE
becuase we use LD = CC
now what happens is that busybox assumes that linker will be called
directly, and hence sprinkles linkers options in its kbuild system which
aggregate into LDFLAGS, some of these options are happily ignored by gcc
as well but it passes -r options rightly to linker so it all works,
however when using clang, this falls apart since -r is not known option
for clang so it drops this option and all obects which should be
partially linked becomes ET_EXEC and when they are added to final link
then gold starts to get confused
/mnt/home/kraj/work/angstrom/build/tmp-angstrom-glibc/sysroots/x86_64-linux/usr/bin/arm-angstrom-linux-gnueabi/arm-angstrom-linux-gnueabi-ld:
error: applets/built-in.o: unsupported ELF file type 2
clang-3.7: error: linker command failed with exit code 1 (use -v to see invocation)
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Thu, 24 Sep 2015 08:54:33 +0000 (09:54 +0100)]
sstate: run recipe-provided hooks outside of ${B}
To avoid races between the sstate tasks/hooks using ${B} as the cwd, and other
tasks such as cmake_do_configure which deletes and re-creates ${B}, ensure that
all sstate hooks are run in the right directory, and run the prefunc/postfunc in WORKDIR.
To avoid logs being overwriten when running the automated
tests multiple times, log files include timestamps in
their names and a link is created to point to the latest one.
Signed-off-by: Lucian Musat <george.l.musat@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Patrick Ohly [Thu, 24 Sep 2015 14:53:10 +0000 (16:53 +0200)]
image types: add hdddirect
When image-vm.bbclass was introduced, it indirectly also introduced a
".hdddirect" image type based on boot-directdisk.bbclass. However, one
could only get that image when also enabling at least one of the
virtual machine images.
The .hdddirect images are useful by themselves. By registering
image-vm.bbclass as implementation of it, it becomes possible to
select them with:
IMAGE_FSTYPES = "hdddirect"
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Alex Franco [Wed, 23 Sep 2015 16:13:56 +0000 (18:13 +0200)]
sanity.bbclass: show warning when chmod fails
* for some reason this part of:
http://patchwork.openembedded.org/patch/102561/
wasn't ever merged.
[YOCTO #7669]
Signed-off-by: Alex Franco <alejandro.franco@linux.intel.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Patrick Ohly [Mon, 21 Sep 2015 14:30:10 +0000 (16:30 +0200)]
systemd: apply persistent storage udev rules also for /dev/hd*
This fixes booting with initramfs and root=UUID on machines with IDE
disks, like "runqemu hdddirect", and kernels which still use the
deprecated CONFIG_IDE.
v2: Rebased against current master-next.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Markus Lehtonen [Tue, 15 Sep 2015 12:29:55 +0000 (15:29 +0300)]
rpm: search for gpg if gpg2 is not found
Some (host) systems only have a binary named 'gpg' (e.g. Fedora) while
some only have 'gpg2' (Ubuntu) and others have both of them (openSUSE).
Currently the behavior of rpm-native with regards to GnuPG depends on
the host platform: rpm(-native) is configured to use GnuPG binary of the
host system if 'gpg2' is found in $PATH. Otherwise, rpm(-native) will
default to using '%{_bindir}/gpg2' which will be pointing to a sysroot
binary which usually does not exist.
This patch changes rpm to look for both 'gpg' and 'gpg2' when searching
for the GnuPG binary in PATH. This makes possible to create signed RPM
packages on different host platforms, using the GnuPG binary of the
host, without the need to explicitly define the gpg binary in bitbake
configuration (via GPG_BIN variable).
[YOCTO #8134]
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Richard Purdie [Sat, 26 Sep 2015 16:49:25 +0000 (17:49 +0100)]
qemurunner: Handle qemu start failure correctly
If qemu didn't start correctly, we may not have registered the child
signal. This results in a nasty traceback which confuses the underlying
issue. Cleanup this code and make the handler cleanup conditional.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sat, 26 Sep 2015 16:47:39 +0000 (17:47 +0100)]
gcc-runtime: Add multilib C++ header mapping
The SDK was unable to find the C++ header pieces correctly since its
using a generic compiler, not one specifically targeting the multilib
vendor prefix. This adds in the right mapping to ensure multilib SDKs
work as expected. This fixes multilib SDK automated tests.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sat, 26 Sep 2015 16:46:53 +0000 (17:46 +0100)]
oeqa/oetest: Fix SDK command execution
The SDK environment wasn't being sourced when running these test
commands, meaning in some cases the cross compiler was being tested,
not the SDK tools. This is clearly not the intent so fix this by
ensuring the SDK environment is present. This fixes test failures
in multilib SDKs.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sat, 26 Sep 2015 16:44:59 +0000 (17:44 +0100)]
mulitlib: Ensure SDKTARGETSYSROOT is set correctly
When building something like lib32-core-image-minimal -c populate_sdk, we
expect one sysroot with both multilibs installed. We therefore
need a single SDKTARGETSYSROOT value which doesn't change when multilibs
are enabled.
This makes the image generation code match what the meta-environment
files set the SDK up to use.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Fri, 25 Sep 2015 22:25:12 +0000 (23:25 +0100)]
gdk-pixbuf: move gdk-pixbuf-query-loaders to $libdir for multilib safety
If for example gdk-pixbuf and lib32-gdk-pixbuf are in an image then only one
${bindir}/gdk-pixbuf-query-loaders will be installed, so only one variant will
actually be usable.
Solve this by moving gdk-pixbuf-query-loaders into ${libdir} as it's intimately
tied to the library and rarely directly invoked by the user, and update the
callers to use the right path.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Wed, 16 Sep 2015 02:04:12 +0000 (19:04 -0700)]
multilib: Drop populate_sdk variable manipulation
I believe this code dates from previous times when we didn't extend
the TOOLCHAIN_TARGET* variables to cover all multilibs. We now do
this so this code acutally breaks things by removing the non-multilib
variants.
By changing this, a multilib SDK now contains both sets of base libraries
which matches the tools we ship with it. If the user wishes to customise,
this also becomes easier.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Wed, 16 Sep 2015 02:04:11 +0000 (19:04 -0700)]
package_manager.py: make rpm install mutilib pkgs corectly
When configure multilib, "bitbake <image_bb> -c populate_sdk" should
install all arch toolchains (for example, 32 and 64bit), but rpm not
handle the multilib requires correctly, for example:
lib32-packagegroup-core-standalone-sdk-target requires lib32-libc6, rpm
may pull in libc6 rather than lib32-libc6, there are the similar issue
when:
Richard Purdie [Wed, 23 Sep 2015 22:32:45 +0000 (23:32 +0100)]
gdk-pixbuf: Avoid rebuild failures
If gdkpixbuf-native rebuilds and there are stale (broken) modules lying around,
it can fail to run the postinst. E.g. svg links to harfbuzz and if harfbuzz is
removed from the sysroot but the svg loader isn't, we get a symbol linking issue.
The reproducer is along the lines of build gdk-pixbuf-native along
with harfbuzz-native and librsvg-native, then make a small change to the
gdk-pixbuf recipe that would cause it to rebuild, clean harfbuzz-native
and then build gdk-pixbuf.
To fix this, when we install gdk-pixbuf, we wipe out any previous loaders.
The idea is that gdk would always come first and anything else installing
itself will come later and rerun the postinst if needed. We can therefore
just remove any other loaders.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
systemd: fix tmpfiles location when multilib in use
Systemd's configuration files for creation, deletion and cleaning
of volatile and temporary files are installed in /usr/lib even when
multilib is in use (when /usr/lib64 is available). In this check the
systemd.conf file will not be found if libdir is /usr/lib64 so we fix the
path to match this file's installation path to look for it in
${exec_prefix}/lib
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Kai Kang [Wed, 23 Sep 2015 09:04:37 +0000 (17:04 +0800)]
p11-kit: configure without trust-paths
Configure option --with-trust-paths is only used for test scripts
trust/test-extract which is not packaged by default. If the option is
not provided, it checks 4 files on build machine. If the files don't
exist, configure fails.
Add configure option '--without-trust-paths' to fix this issue.
Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Wed, 16 Sep 2015 02:04:10 +0000 (19:04 -0700)]
oe-pkgdata-util: avoid returning skipped packages
The skipped packages may be pulled in by another package, for example,
when libc6-dbg is already installed and should be skipped, but it would
be pulled in by libsegfault, this patch fixes the issue.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Wed, 16 Sep 2015 02:04:09 +0000 (19:04 -0700)]
toolchain-shar-extract.sh: remove checkbashism
Fixed when sh is bash:
$ sh ./tmp/deploy/sdk/poky-glibc-x86_64-core-image-minimal-core2-64-toolchain-1.8+snapshot.sh
Poky (Yocto Project Reference Distro) SDK installer version 1.8+snapshot
===========================================================
./tmp/deploy/sdk/poky-glibc-x86_64-core-image-minimal-core2-64-toolchain-1.8+snapshot.sh: 77: read: Illegal option -e
You are about to install the SDK to "/opt/poky/1.8+snapshot". Proceed[Y/n]? ../SDK2
Installation aborted!
There is ony one bashism "read -e" in toolchain-shar-extract.sh, but
'-e' is useless here, so remove it and use /bin/sh.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Wed, 23 Sep 2015 21:36:07 +0000 (22:36 +0100)]
archiver: stamp-base is dead, remove it
stamp-base was only ever used by the shared workdir code in gcc. This
turned out to be problematic and has been replaced by other approaches
which don't need specialist bitbake knowledge.
stamp-base will likely get removed from bitbake but for now, remove it
from archiver to simplfy the code since gcc no longer uses it.
This stops people getting confused by the obsolete code paths which I'm
getting a lot of questions about.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Wed, 23 Sep 2015 21:33:17 +0000 (22:33 +0100)]
gcc-shared-source: Set empty SRC_URI
gcc-source is the only gcc recipe meant to handle the fetch/unpack/patch
tasks, the other gcc recipes then depend on this.
This approach has been creating some confusion for tools like the archiver.
The simplest way to signal to these processes that there is no source
is to empty SRC_URI at the same time we disable the other tasks.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When building libgcc some files and libraries may be built but not packaged.
The original code packaged only some explicitly specified files targeting mostly x86.
This patch does not discriminate between various targets.
It fixes errors such as these:
ERROR: QA Issue: libgcc: Files/directories were installed but not shipped in any package:
/usr/lib/arm-poky-eabi/4.9.3/thumb
/usr/lib/arm-poky-eabi/4.9.3/fpu
/usr/lib/arm-poky-eabi/4.9.3/thumb/libgcov.a
/usr/lib/arm-poky-eabi/4.9.3/thumb/crtn.o
/usr/lib/arm-poky-eabi/4.9.3/thumb/crtend.o
/usr/lib/arm-poky-eabi/4.9.3/thumb/crtbegin.o
/usr/lib/arm-poky-eabi/4.9.3/thumb/libgcc.a
/usr/lib/arm-poky-eabi/4.9.3/thumb/crti.o
/usr/lib/arm-poky-eabi/4.9.3/fpu/libgcov.a
/usr/lib/arm-poky-eabi/4.9.3/fpu/crtn.o
/usr/lib/arm-poky-eabi/4.9.3/fpu/crtend.o
/usr/lib/arm-poky-eabi/4.9.3/fpu/crtbegin.o
/usr/lib/arm-poky-eabi/4.9.3/fpu/libgcc.a
/usr/lib/arm-poky-eabi/4.9.3/fpu/crti.o
Please set FILES such that these items are packaged. Alternatively if they are unneeded,
avoid installing them or delete them within do_install. [installed-vs-shipped]
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
brian avery [Mon, 21 Sep 2015 23:45:55 +0000 (16:45 -0700)]
meta-selftest: add error recipe and error-image
* The error recipe throws an error during compile
* The error-image includes the error recipe
* Initial target is toaster selenium testing
Signed-off-by: brian avery <avery.brian@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes systemd failing to start on Raspberry Pi 2 if it is compiled
with GCC 5.2.
It would try to start "Journal Service" and "udev Kernel Device Manager"
but fail repeatedly.
[YOCTO #8291]
Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
oeqa/utils/dump: Add default commands and directory
Currently if qemu fails when running a selftest and
tries to run some commands on the host it will fail
because some variables required by the Dumper class
do not exist because testimage was not included.
This change adds a default parent directory to save
the dumps for the host or target. Also adds default
commands to run if no commands were provided to the
class. With these changes the previous errors using
selftest don't show anymore.
[YOCTO #8306]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order for the test export runner to work oetest needs to be
separated from bitbake environment. There is no need to use bb
import here so we can use a logger instead.
Signed-off-by: Lucian Musat <george.l.musat@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
