Tom Zanussi [Tue, 19 Mar 2013 04:58:07 +0000 (23:58 -0500)]
perf: make PKGV match kernel version
Have perf grab and use the kernel version it's built from for PKGV,
rather than the default perf recipe version, so the final packages get
the kernel version instead of the default 1.0, which represents a
backwards value from the previous recipe.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Tue, 19 Mar 2013 11:44:27 +0000 (11:44 +0000)]
qemu-testlib: Add python helper and simplify shell
The current code has a race since it greps for *any* qemu process
running, even if it isn't the one we started. This leads to some sanity
tests potentially failing on machines where multiple sets of sanity tests
are running.
To resovle this and some other ugly code issues, add a python script
to accurately walk the process tree and find the qemu process. We can
then replace all the shell functions attempting this which happen to
work in many cases but not all.
Also clean up some of the error handling so its more legible.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jason Wessel [Mon, 4 Mar 2013 23:48:41 +0000 (23:48 +0000)]
syslinux.bbclass: Add a default serial console option and real boot menu support
The previous syslinux menu code did not support using both a serial
and vga console, but this has worked for years in syslinux so there is
no reason not to take advantage of it. The previous menu looked like:
-------------------------------------------------------
Linux Boot Menu
The following targets are available on this image:
This commit makes it look something more like a traditional grub menu
on both the serial console and vga console as well as providing the
option to continue on using either the serial or vga console with the
correct kernel arguments.
You can see the screen shots attached to the bugzilla.
Khem Raj [Sun, 17 Mar 2013 22:56:24 +0000 (22:56 +0000)]
iptables: Turn ipv6 and libnfnetlink support into PACKAGECONFIG
Detection of libnfnetlink is automatic in configure which means
that when you have meta-networking in your cosmos, it would create
a race condition where if libnfnetlink is already staged then it
will be enabled otherwise disabled. The issue happens quite often
with sstate and high parallelism. Since the dependency libnfnetlink
is not part of OE-Core, this patch turns it into a PACKAGECONFIG
which is diabled by default and iptables is patched to provide
the knob.
If you want to enable libnfnetlink support then it can be done
in a bbappend where you are sure that you are also including
meta-networking in your distro.
While at it also turned ipv6 support into packageconfig
Olivier Guiter [Mon, 18 Mar 2013 15:34:57 +0000 (15:34 +0000)]
neard: upgrade to 0.10
neard ver 0.10:
Added initial WiFi handover support.
Added Service Name Lookup support to nfctool.
Added NDEF building unit tests.
Added State support to Bluetooth handover agent.
Added neard and neard.conf man pages.
Added a copy of the NFC kernel header.
Fixed handover validation tests failures.
Fixed Tag and Device PropertyChanged signal.
Richard Purdie [Thu, 14 Mar 2013 17:26:20 +0000 (17:26 +0000)]
package: Add cachedpath optimisation
Currently, various standard library operations like os.walk(),
os.path.isdir() and os.path.islink() each call stat or lstat which
involves a syscall into the kernel. There is no caching since they could
conceivably have changed on disk. The result is that for something like
the do_package task of the kernel we're spending over two minutes making
868,000 individual stat calls for 23,000 files. This is suboptimal.
This patch adds lib/oe/cachedpath.py which are a set of replacement
functions for these operations which use cached stat data rather than
hitting the kernel each time. It gives a nice performance improvement
halving the build time of the kernel do_package.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Chase Maupin [Wed, 13 Mar 2013 12:03:50 +0000 (07:03 -0500)]
kernel bbclass: return to original directory in do_deploy
* During the base kernel_do_deploy function the directory is
changed to DEPLOYDIR in order to do some cleanup and symlinking.
However, the directory is not changed back to the original
starting directory ${S} at the end. For append functions this
means that the starting directory is not ${S} as expected but
instead ${DEPLOYDIR}.
For functions like the do_deploy_append in
recipes-kernel/linux/linux-dtb.inc there is an assumption that
you are still in the source directory and not the DEPLOYDIR.
Without this change the .dtb files are not copied because the
check for the existence of ${DTS_FILE} which is a relative
path from the ${S} directory fails. This means that the .dtb
files are not copied into the deploy directory and subsequently
the deploy/images directory.
In the log.do_deploy file you will see lines like:
Warning: arch/arm/boot/dts/xxxxx.dts is not available!
Colin Walters [Thu, 7 Mar 2013 23:45:22 +0000 (18:45 -0500)]
cracklib: Generate compiled dict using default dictionary
While cracklib compiles, the generated library's FascistCheck() API
will look for the default compiled dictionary, fail to find it, and
invoke exit(1), which then in turn breaks gnome-initial-setup that
uses cracklib via libpwquality. (Quality here obviously referring to
the password, and not the libraries...)
What we do here is basically the same as what happens in the current
Fedora spec file, except the latter uses a far larger dictionary.
To make this work, we need to build cracklib-native because the
dictionary compiler is written in native code.
Signed-off-by: Colin Walters <walters@verbum.org> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Chen Qi [Wed, 13 Mar 2013 07:01:33 +0000 (15:01 +0800)]
rm_work.bbclass: inhibit rm_work per recipe
Use RM_WORK_WHITELIST to inhibit rm_work per recipe. In this way,
one can use rm_work for the most of the recipes but still keep the
work area for the recipe(s) one is working on.
As an example, the following settings in local.conf will inhibit
rm_work for icu-native, icu and busybox.
INHERIT += "rm_work"
RM_WORK_WHITELIST += "icu-native icu busybox"
If we comment out the RM_WORK_WHITELIST line and do a rebuild, the
working area of these recipes will be cleaned up.
Kevin Strasser [Mon, 11 Mar 2013 22:51:23 +0000 (15:51 -0700)]
archiver: fix archive filtering behavior
With the addition of sstate, ensure that archiving tasks are only
added to the build if they produce output in the directory specified
by the 'sstate-inputdirs' flag.
Move calls to 'tar_filter' and 'not_tarball' out to
archive-*-source.bbclass in order to filter out packages before their
archiving tasks are added to the build.
Additionally, negate the return value of copyleft_should_include in
tar_filter, so that packages that do not pass are in turn filtered out.
Signed-off-by: Kevin Strasser <kevin.strasser@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Log and script archives are only generated when explicitly enabled by
setting the environment variable SOURCE_ARCHIVE_LOG_WITH_SCRIPTS to
'logs_with_scripts'. When left disabled, the path specified to be
handled by sstate is never created, resulting in a build error.
Only attempt to archive scripts and logs when explicitly enabled.
Signed-off-by: Kevin Strasser <kevin.strasser@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Richard Purdie [Mon, 18 Mar 2013 00:07:38 +0000 (00:07 +0000)]
image.bbclass: Drop legacy export of IMAGE_BASENAME
We used to export this in the days an external script handled the image
generation. This is no longer the case and hence we no longer need this
export.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Mon, 18 Mar 2013 00:01:22 +0000 (00:01 +0000)]
gcc-common: Exclude AVAILTUNES from sstate checksums
AVAILTUNES is only used as a sanity check, we don't need to
include it in the sstate checksum in this case. If included
it can cause problems when switching machines with a common
package architecture.
[YOCTO #3667]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Mon, 18 Mar 2013 00:00:06 +0000 (00:00 +0000)]
tune-xscale: Drop unneeded optimisation overrides
These hacks have been around for years and deal with old gcc issues.
They've been removed from the other use sites, we should clean up the
core tune file too.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem Raj [Sun, 17 Mar 2013 08:04:28 +0000 (01:04 -0700)]
bitbake.conf: Add LICENSE_PATH to sstate whitelist
some layers e.g. meta-intel are defining LICENSE_PATH in layer.conf like
LICENSE_PATH += "${LAYERDIR}/common/custom-licenses"
This causes the target packages to invalidate the siginfo and casues
rebuild for all packages.
Saul Wold [Fri, 15 Mar 2013 19:54:40 +0000 (12:54 -0700)]
util-linux: Update License Information (remove GPLv3 Licnese)
The upstream authors have updated the licenses of a couple subcomponents,
these were GPLv3, but updated to be either GPLv2 or LGPLv2.1 accordingly.
These changes make the util-linux package become completely non-GPLv3.
Cleaned up some white space issue also
[YOCTO #4014]
Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Laurentiu Palcu [Fri, 15 Mar 2013 16:01:53 +0000 (18:01 +0200)]
populate_sdk_base: search for perl scripts after symlinks are relocated
grep will throw "No such file or directory" errors for all invalid
symlinks. To overcome this, move the search after the symlinks have been
changed to point to the new location.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Zhenhua Luo [Fri, 15 Mar 2013 13:27:27 +0000 (21:27 +0800)]
elfutils: fix the num passed to memset in ar.c
Following build error will appear on Fedora18+:
ar.c: In function 'do_oper_delete':
ar.c:918:31: error: argument to 'sizeof' in 'memset' call is the same expression as the destination; did you mean to dereference it? [-Werror=sizeof-pointer-memaccess]
memset (found, '\0', sizeof (found));
Signed-off-by: Zhenhua Luo <zhenhua.luo@freescale.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sat, 16 Mar 2013 15:46:15 +0000 (15:46 +0000)]
package_rpm: Ensure PV manipulations are correct
The previous change to this function fixed one manipuation at
the expense of the other, depending on ow expanded the versioned
dependency string was when the AUTOINC substitution was made.
This update ensures we cover both cases and ensures the classextended
version works as as well as the normal case.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Wed, 13 Mar 2013 19:04:51 +0000 (20:04 +0100)]
icecc: improve interaction with sstate
* exclude ICECC_PARALLEL_MAKE (like PARALLEL_MAKE is)
* add ICECC_DISBLED to be able to disable whole icecc functionality
while keeping icecc enabled. This is useful when you want multiple
builders sharing same sstate-cache, but only some of them using icecc.
* inheriting icecc changes all checksums because of do_*_prepends calls,
but because icecc should not influence binary output of task we should
get same checksums for tasks build with and without icecc
* ICECC_DISABLED when set (to any non-empty value will disable icecc env
modifications but while keeping same sstate checksum
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Zhenhua Luo [Tue, 12 Mar 2013 03:58:58 +0000 (11:58 +0800)]
elfutils: Fix size passed to snprintf for invalid sh_name case
Following build error will appear on Fedora18.
nm.c: In function 'show_symbols_sysv':
nm.c:756:27: error: argument to 'sizeof' in 'snprintf' call is the same expression as the destination; did you mean to provide an explicit length? [-Werror=sizeof-pointer-memaccess]
snprintf (name, sizeof name, "[invalid sh_name %#" PRIx32 "]",
^
Signed-off-by: Zhenhua Luo <zhenhua.luo@freescale.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Zhenhua Luo [Wed, 13 Mar 2013 07:43:04 +0000 (15:43 +0800)]
binutils: fix ineffectual zero of cache and array bounds issue
binutils build fails on Fedora18+:
1. binutils-2.23.1/bfd/elf32-xtensa.c:6078:36: error: argument to 'sizeof' in 'memset' call is the same expression as the destination; did you mean to dereference it? [-Werror=sizeof-pointer-memaccess]
memset (sec_cache, 0, sizeof (sec_cache));
^
2. binutils-2.23.1/bfd/elf32-xtensa.c:6120:32: error: argument to 'sizeof' in 'memset' call is the same expression as the destination; did you mean to dereference it? [-Werror=sizeof-pointer-memaccess]
memset (sec_cache, 0, sizeof (sec_cache));
^
3. binutils-2.23.1/opcodes/arc-dis.c:430:13: error: argument to 'sizeof' in '__builtin_strncat' call is the same expression as the destination; did you mean to provide an explicit length? [-Werror=sizeof-pointer-memaccess]
sizeof (state->commentBuffer));
^
4. binutils-2.23.1/opcodes/rl78-dis.c:230:13: error: array subscript is above array bounds [-Werror=array-bounds]
if (oper->use_es && indirect_type (oper->type))
^
Signed-off-by: Zhenhua Luo <zhenhua.luo@freescale.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Laurentiu Palcu [Mon, 11 Mar 2013 16:05:13 +0000 (18:05 +0200)]
xf86-video-*: delete references to mibstore.h
This patch removes any references to mibstore.h, which has been removed
from xserver-org, from the following drivers:
* xf86-video-vmware
* xf86-video-fbdev
* xf86-video-vesa
Laurentiu Palcu [Mon, 11 Mar 2013 12:19:28 +0000 (14:19 +0200)]
xserver-xorg: upgrade to 1.14.0
Aditionally:
* adjust the aarch64.patch because the logic changed and the
lnx_video.c changes are no longer necessary;
* created patch to fix compilation issue when not using xinerama;
Hongxu Jia [Tue, 12 Mar 2013 01:54:06 +0000 (09:54 +0800)]
qemu-native:fix do_compile failed on SLED 11.2
1, When build qemu-native on SLED 11.2, there is an error:
...
| In file included from /usr/include/bits/sigcontext.h:28,
| from /usr/include/signal.h:339,
| from /buildarea2/tmp/work/i686-linux/qemu-native/1.4.0-r0/
qemu-1.4.0/include/qemu-common.h:42,
| from fsdev/virtfs-proxy-helper.c:23:
| /usr/include/asm/sigcontext.h:28: error: expected specifier-
qualifier-list before '__u64'
| /usr/include/asm/sigcontext.h:191: error: expected specifier-
qualifier-list before '__u64'
...
2, The virtfs-proxy-helper.c includes <sys/capability.h> and
qemu-common.h in sequence. The header include map is:
(`-->' presents `include')
...
"virtfs-proxy-helper.c" --> <sys/capability.h>
...
"virtfs-proxy-helper.c" --> "qemu-common.h" --> <signal.h> -->
<bits/sigcontext.h> --> <asm/sigcontext.h> --> <linux/types.h> -->
<asm/types.h> --> <asm-generic/types.h> --> <asm-generic/int-ll64.h>
...
3, The bug is found on SLED 11.2 x86. In libcap header file
/usr/include/sys/capability.h, it does evil stuff like this:
...
25 /*
26 * Make sure we can be included from userland by preventing
27 * capability.h from including other kernel headers
28 */
29 #define _LINUX_TYPES_H
30 #define _LINUX_FS_H
31 #define __LINUX_COMPILER_H
32 #define __user
33
34 typedef unsigned int __u32;
35 typedef __u32 __le32;
...
This completely prevents including /usr/include/linux/types.h.
The above `<asm/sigcontext.h> --> <linux/types.h>' is prevented,
and '__u64' is defined in <asm-generic/int-ll64.h>.
4, Modify virtfs-proxy-helper.c to include <sys/capability.h>
last to workaround the issue.
Ross Burton [Wed, 6 Mar 2013 10:35:48 +0000 (10:35 +0000)]
systemd: remove libsystemd-daemon linkage in libudev
libudev was statically linking to libsystemd-shared, which was linking to
libsystemd-daemon (via libtool). This is a spurious dependency so backport a
commit from upstream to remove it.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
