dbus: enable x support and put dbus-launch into new package dbus-x11
* Enable x support only add rdepends to dbus-launch. Make it a
seperate package so other packages like dbus does not rdepend on
libx11.
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Wed, 25 May 2011 22:51:57 +0000 (23:51 +0100)]
binutils: Add missing dependency on zlib-native
Without this, compiler errors such as:
configure:33440: i586-poky-linux-gcc -march=i586 --sysroot=/media/build2/builds/rptest/b2/tmp/sysroots/qemux86 -o conftest -D_REENTRANT -Wl,-O1 -Wl,--as-needed conftest.c -lpthread >&5
/media/build2/builds/rptest/b2/tmp/sysroots/x86_64-linux/usr/libexec/i586-poky-linux/gcc/i586-poky-linux/4.6.0/as: /media/build2/builds/rptest/b2/tmp/sysroots/x86_64-linux/usr/bin/i586-poky-linux/../../../usr/lib/libz.so.1: no version information available (required by /media/build2/builds/rptest/b2/tmp/sysroots/x86_64-linux/usr/libexec/i586-poky-linux/gcc/i586-poky-linux/4.6.0/as)
/media/build2/builds/rptest/b2/tmp/sysroots/x86_64-linux/usr/libexec/i586-poky-linux/gcc/i586-poky-linux/4.6.0/ld: /media/build2/builds/rptest/b2/tmp/sysroots/x86_64-linux/usr/bin/i586-poky-linux/../../../usr/lib/libz.so.1: no version information available (required by /media/build2/builds/rptest/b2/tmp/sysroots/x86_64-linux/usr/libexec/i586-poky-linux/gcc/i586-poky-linux/4.6.0/ld)
can be see. This is due to the compiler being built against the system
zlib, before zlib-native is built and in the sysroot. Once that has been
built it can confuse the linker depending on the relative library versions.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Wed, 25 May 2011 12:40:05 +0000 (14:40 +0200)]
python-2.6.6: py_package_preprocess should change Makefile only in PKGD not D
* PACKAGEFUNCS ?= "perform_packagecopy \
${PACKAGE_PREPROCESS_FUNCS} \
our py_package_preprocess is called after perform_packagecopy which does copy D to PKGD
so we change it to target version in D (image/) before populating sysroot (sysroot-destdir/)
while keeping Makefile.sysroot version in PKGD which was created before calling
py_package_preprocess, so both package for runtime and sysroot end wrong
* I haven't seen this problem on faster builder, I guess because do_package and do_populate_sysroot
can run in paralell and I was lucky that do_populate_sysroot finished before py_package_preprocess
was started, but if you build python step by step -c package first you should see it every time
* here is proof that with PKGD it works better:
$ bitbake -c cleanall python
$ bitbake -c install python
$ grep LIBDIR= \
./packages-split/python-distutils/usr/lib/python2.6/config/Makefile \
./package/usr/lib/python2.6/config/Makefile \
./sysroot-destdir/usr/lib/python2.6/config/Makefile \
./image/usr/lib/python2.6/config/Makefile \
./Python-2.6.6/Makefile \
~/shr-core/tmp/sysroots/om-gta02/usr/lib/python2.6/config/Makefile
grep: ./packages-split/python-distutils/usr/lib/python2.6/config/Makefile: No such file or directory
grep: ./package/usr/lib/python2.6/config/Makefile: No such file or directory
grep: ./sysroot-destdir/usr/lib/python2.6/config/Makefile: No such file or directory
./image/usr/lib/python2.6/config/Makefile:LIBDIR= /OE/shr-core/tmp/sysroots/om-gta02/usr/lib
./Python-2.6.6/Makefile:LIBDIR= /usr/lib
/OE/shr-core/tmp/sysroots/om-gta02/usr/lib/python2.6/config/Makefile:LIBDIR= /OE/shr-core/tmp/sysroots/om-gta02/usr/lib
Saul Wold [Tue, 24 May 2011 06:22:41 +0000 (23:22 -0700)]
image_types: add IMAGE_ROOTFS_EXTRA_SPACE
[YOCTO #886]
This address 2 needs after the IMAGE_ROOTFS_SIZE is cleaned up, by
removing the _ext2/3 overrides it allows for a cleaner override
using IMAGE_ROOTFS_SIZE to create a large rootfs, or by setting the
IMAGE_ROOTFS_EXTRA_SPACE, will allow for extra space allocated in Kilobytes
above the base size (determined by du of the rootfs * IMAGE_OVERHEAD_FACTOR,
default of 1.3).
Saul Wold [Tue, 24 May 2011 06:15:30 +0000 (23:15 -0700)]
IMAGE_ROOTFS_SIZE Cleanup
This basic cleanup removes the _ext2/3 overrides from places they
no longer belong since they did not allow further overrides. In doing
this the core-image-minimal* recipes can now set a reasonably small
rootfs so that it's a realistic size for minimal.
The new default for minimal is 8M and will be adujsted upward by the
IMAGE_OVERHEAD_FACTOR (default of 1.3).
This also fixes the ROOTFS_SIZE usage in the IMAGE_CMD_<fstype> code
eglibc.inc: Transfer PARALLEL_MAKE to PARALLELMFLAGS
* Currently we are passing -jN or -j N flags to eglibc makefiles
however eglibc uses a make variable called PARALLELMFLAGS
to pass information about parallel build to sub-makes
* Currently make install ran without parallelism but now
it should have parallel building flags passed to do_install
correctly which inturn should improve build time of
eglibc on systems using parallel build -j with values > 1
Khem Raj [Tue, 24 May 2011 01:53:59 +0000 (18:53 -0700)]
elfutils_0.148.bb: Fix compilation on uclibc
Currently all components of elfutils dont compile with uclibc
but elfutils is one part which is needed by other recipes e.g.
gcc 4.5 to compile. we make adjustments so that when compiling
for uclibc targets it _only_ builds and packages libelf
use --enable-uclibc only when building for uclibc targets
The supporting patch is also needed for compiling with uclibc
to specify -lintl and -luargp on linker commandline
Darren Hart [Mon, 23 May 2011 17:21:53 +0000 (10:21 -0700)]
create-pull-request: generalize the repository URL parsing
The existing REMOTE_URL and REMOTE_REPO parsing made assumptions regarding
the git URL format used for the known repository types. In fact, both of
these ssh URL formats are valid for all the known repositories. Specifically:
Kang Kai [Fri, 20 May 2011 09:26:36 +0000 (17:26 +0800)]
ghostscript: fix run failure on mpc8315e
When run gs on mpc8315, it fails with:
GPL Ghostscript 9.02: ./psi/interp.c(291): Fatal error -20 in gs_interp_init!
It is caused by cross compile.
Accoding to the ghostscript document on:
http://pages.cs.wisc.edu/~ghost/doc/cvs/Make.htm#Cross-compiling
it needs some manual work, so import patches from WindRiver Linux.
Update to using oe way to add arch.h, thanks to Richard.
Otavio Salvador [Fri, 20 May 2011 20:36:33 +0000 (20:36 +0000)]
send-pull-request: drop sendemail checks
git send-email has the correct check on it. Basically the From is
taken from the git 'user' and 'email' config values and in case
'sendemail.smtpserver' is not provided it defaults to use local
sendmail command.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Darren Hart <dvhart@linux.intel.com>
Khem Raj [Thu, 19 May 2011 02:17:40 +0000 (19:17 -0700)]
distcc_2.18.3.bb: Fix compilation on uclibc
We enable gtk/gnome in distcc that code uses loadavg()
a function unimplemented in uclibc. Therefore for uclibc
we disable gnome and gtk+ features in distcc
Nitin A Kamble [Thu, 19 May 2011 22:45:12 +0000 (15:45 -0700)]
gplv2 recipes update upstream status of patches
grep-2.5.1a: update upstream status of patches
tar-1.17: update upstream-status of patches
at-3.1.12: update upstream-status for patches
cpio-2.8: update upstream-status for patches
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Chris Larson [Wed, 9 Feb 2011 14:09:43 +0000 (07:09 -0700)]
base.bbclass: switch to current OE's imports handling
The current mechanism makes it easier for classes to add new oe modules to be
automatically imported, and thereby made available to python snippets (${@}).
Signed-off-by: Chris Larson <chris_larson@mentor.com>
Chris Larson [Tue, 9 Nov 2010 21:48:13 +0000 (14:48 -0700)]
Implement variable typing (sync from OE)
This implementation consists of two components:
- Type creation python modules, whose job it is to construct objects of the
defined type for a given variable in the metadata
- typecheck.bbclass, which iterates over all configuration variables with a
type defined and uses oe.types to check the validity of the values
This gives us a few benefits:
- Automatic sanity checking of all configuration variables with a defined type
- Avoid duplicating the "how do I make use of the value of this variable"
logic between its users. For variables like PATH, this is simply a split(),
for boolean variables, the duplication can result in confusing, or even
mismatched semantics (is this 0/1, empty/nonempty, what?)
- Make it easier to create a configuration UI, as the type information could
be used to provide a better interface than a text edit box (e.g checkbox for
'boolean', dropdown for 'choice')
This functionality is entirely opt-in right now. To enable the configuration
variable type checking, simply INHERIT += "typecheck". Example of a failing
type check:
BAZ = "foo"
BAZ[type] = "boolean"
$ bitbake -p
FATAL: BAZ: Invalid boolean value 'foo'
$
Examples of leveraging oe.types in a python snippet:
PACKAGES[type] = "list"
python () {
import oe.data
for pkg in oe.data.typed_value("PACKAGES", d):
bb.note("package: %s" % pkg)
}
Dexuan Cui [Wed, 18 May 2011 04:09:01 +0000 (12:09 +0800)]
package-index.bb: add support for deb and rpm.
[YOCTO #1024]
Currently package-index.bb only supports ipk. This commit adds the support
for rpm and deb, too.
------------------------------
How to generate and use repos:
1) run "bitbake package-index" after building some target,
e.g., core-image-sato-sdk;
2) export ${DEPLOY_DIR_RPM}, ${DEPLOY_DIR_IPK} and ${DEPLOY_DIR_DEB} by a
webserver on the host, assuming the host IP is 192.168.7.1, at
http://192.168.7.1/rpm
http://192.168.7.1/ipk
http://192.168.7.1/deb
3) inside the target, according to the packaging system (rpm, ipk or deb) used
when we generate the target image, we can use different ways to manage
packages:
3.1) RPM
run "zypper addrepo http://192.168.7.1/rpm main; zypper refresh"
to retrieve info about the repo; next, we can use "zypper install/remove"
to manage packages.
3.2) IPK
add the repo info into opkg config file, i.e., in
/etc/opkg/arch.conf, we can add something like
"src i586 http://192.168.7.1/ipk/i586", and next, we run "opkg update" to
make opkg update the list of available packages. And later, we can use
"opkg install/remove" to manage packages.
3.3) DEB
Currently in target, some important config files, like
/var/lib/dpkg/status and /etc/apt/sources.list, for deb/apt are missing. So
we can't install/remove package in target at present.
Richard Purdie [Tue, 17 May 2011 10:48:29 +0000 (12:48 +0200)]
distro/defaultsetup.conf: Append TCLIBC to TMPDIR by default
The current solutions to share uclibc, eglibc and glibc builds in the
same tree all have various issues associated with them. Appending the
suffix to TMPDIR seems like the best solution since sstate (which
defaults to outside TMPDIR) will allow reuse of any components.
This avoids messy changes to the core with other approaches to this
problem inevitably entail, usually in code where this abstraction isn;'t
logically best placed.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The script was sending one patch at a time, which defeats the internal
confirmation mechanism of git-send-email (which would otherwise allow
the user to send all patches or abort immediately).
Rework the sending logic to use no more than two commands. Use two
commands when the cover letter is to be sent to all recipients with
the -a argument. Otherwise, send all patches via the same command.
The script duplicates git's send confirmation, eliminate that.
Reported-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com> Acked-by: Joshua Lock <josh@linux.intel.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Khem Raj <raj.khem@gmail.com> Cc: Joshua Lock <josh@linux.intel.com> Cc: Otavio Salvador <otavio@ossystems.com.br>
Darren Hart [Fri, 13 May 2011 20:58:36 +0000 (13:58 -0700)]
send-pull-request: don't send all patches to everyone even with -a
Rather than sending every patch to every recipient of the entire series when
-a is used, only send the cover letter to everyone and use git's
--signed-off-by-cc feature to generate an auto cc list for the individual
patches.
Add a -c option to use --signed-off-by-cc to auto cc recipeients at the
individual patch level. This is implied by -a.
Using git to harvest the Cc list means only collecting Signed-off-by and Cc
lines, rather than the more generic *-by lines previously. This is a fair
trade-off for significantly reduced complexity. If users want to add Acked-by
and Tested-by lines and want to use the -a feature, they should include those
recipients as Cc lines as well.
Now that we rely on git for auto-cc for the individual patches,
make sure the user is prompted before sending each patch by forcing
--confirm=always.
Signed-off-by: Darren Hart <dvhart@linux.intel.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Khem Raj <raj.khem@gmail.com> Cc: Koen Kooi <koen@dominion.thruhere.net> Cc: Otavio Salvador <otavio@ossystems.com.br>
Darren Hart [Fri, 13 May 2011 21:03:07 +0000 (14:03 -0700)]
send-pull-request: fix greedy auto-cc regex
A greedy regular expression caused emails to be harvested from patches
that were quoted in the commit message. Ensure only tags that start at the
beginning of the line are considered for harvesting.
NOTE: users are still responsible for verifying the recipients list and to
ensure they do not spam people!
Signed-off-by: Darren Hart <dvhart@linux.intel.com> Acked-by: Bruce Ashfield <bruce.ashfield@windriver.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Richard Purdie <richard.purdie@linuxfoundation.org> Cc: Saul Wold <sgw@linux.intel.com> Cc: Bruce Ashfield <bruce.ashfield@windriver.com> Cc: Otavio Salvador <otavio@ossystems.com.br>
Darren Hart [Fri, 13 May 2011 20:33:57 +0000 (13:33 -0700)]
send-pull-request: remove local mta support
There is no real value in supporting sendmail directly when git
can be configured to use it. The script used to generate the
pull request mails relies heavily on git, so doing so here does
not impose any additional dependencies and it greatly reduces the
complexity of this script.
Signed-off-by: Darren Hart <dvhart@linux.intel.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Otavio Salvador <otavio@ossystems.com.br>
Darren Hart [Fri, 13 May 2011 19:21:57 +0000 (12:21 -0700)]
create-pull-request: rewrite known private URLs to public URLs
Rather than requiring users to have public remotes and private remotes when
their development remotes are ssh based (and therefor unsuitable for a pull
request URL), rewrite the ones we know about from ssh://git@ to git://.
As the remote url vary from remote to remote, do the REMOTE_REPO regex per
remote.
With this infrastructure in place, future patches can augment the list of
known remotes for things like Git Hub, Gitorious, kernel.org, etc.
Signed-off-by: Darren Hart <dvhart@linux.intel.com> Acked-by: Joshua Lock <josh@linux.intel.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Tom Rini <tom_rini@mentor.com> Cc: Tom Rini <tom_rini@mentor.com> Cc: Martin Jansa <martin.jansa@gmail.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Richard Purdie <richard.purdie@linuxfoundation.org> Cc: Joshua Lock <josh@linux.intel.com>
Darren Hart [Fri, 13 May 2011 17:44:49 +0000 (10:44 -0700)]
create-pull-request: use git request-pull and arbitrary remotes
Allow for arbitrary remotes via a new -u argument. Remove the hard coded
references to the pokylinux repositories. Create the WEB_URL from known
remotes. Future patches can add additional WEB_URL mappings for remotes
like Git Hub, Gitorious, and kernel.org.
Rather than duplicating the git request-pull command ourselves, just use
the existing one.
Signed-off-by: Darren Hart <dvhart@linux.intel.com> Acked-by: Joshua Lock <josh@linux.intel.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Tom Rini <tom_rini@mentor.com> Cc: Tom Rini <tom_rini@mentor.com> Cc: Martin Jansa <martin.jansa@gmail.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Richard Purdie <richard.purdie@linuxfoundation.org> Cc: Joshua Lock <josh@linux.intel.com>
Bruce Ashfield [Wed, 18 May 2011 16:07:44 +0000 (12:07 -0400)]
linux-yocto: fix gcc 4.6.0 compilation failures
Fixes bug: [YOCTO #1035]
Fixes bug: [YOCTO #1036]
Fixes gcc 4.6.0 compliation issues by importing the upstream change:
Author: Michal Marek <mmarek@suse.cz>
Date: Mon May 2 12:13:01 2011 +0000
kbuild: Fix passing -Wno-* options to gcc 4.4+
Starting with 4.4, gcc will happily accept -Wno-<anything> in the
cc-option test and complain later when compiling a file that has some
other warning. This rather unexpected behavior is intentional as per
http://gcc.gnu.org/PR28322, so work around it by testing for support of
the opposite option (without the no-). Introduce a new Makefile function
cc-disable-warning that does this and update two uses of cc-option in
the toplevel Makefile.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Michal Marek <mmarek@suse.cz> Tested-by: Stephen Rothwell <sfr@canb.auug.org.au> Integrated-by: Bruce Ashfield <bruce.ashfield@windriver.com>
:100644 100644 0ef00bd... 1d8e7e9... M Documentation/kbuild/makefiles.txt
:100644 100644 7bd863e0.. 74bac80... M Makefile
:100644 100644 ed2773e... ba25c44... M scripts/Kbuild.include
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Darren Hart [Tue, 17 May 2011 18:30:03 +0000 (11:30 -0700)]
u-boot: update SRCREV to 2011.03
Fixes [YOCTO 1029]
u-boot 2010.12 fails to run on the Beagleboard C4 and xM Rev A boards. Commit 55aacbc30e48f6f8a73fb989a58625e70887bc01 suggests there was a mixup during
development, as the MD5SUM change is from the 2011.03 SRCREV back to the
2010.12. Chances are a patch was never sent to update the SRCREV, leaving the
MD5SUM in a bad state.
Update the SRCREV and COPYING MD5SUM to use the 2011.03 version. Built
and tested on Beagleboard xM Rev A and Beagleboard Rev C4.
Signed-off-by: Darren Hart <dvhart@linux.intel.com> Tested-by: Jeff Osier-Mixon <jefro@jefro.net> Cc: Jeff Osier-Mixon <jefro@jefro.net> Cc: Yi Zhao <yi.zhao@windriver.com> Cc: Robert Berger <pokylinux@reliableembeddedsystems.com> Cc: Gary Thomas <gary@mlbassoc.com>
Merged Richard's removal of PR from PV
Paul Eggleton [Tue, 17 May 2011 16:18:16 +0000 (17:18 +0100)]
qt4: re-enable two 4.6.x patches in 4.7.3
Two patches that were being applied in 4.6.x are now applied for 4.7.3.
The functions of these two patches are:
* Add support for 2bpp (only affects qt4-embedded)
* Use correct infix on QtUiTools library (only affects qt4-embedded as
qt4-x11-free does not define an infix)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Saul Wold [Sun, 15 May 2011 01:44:36 +0000 (18:44 -0700)]
qemu: Fix Dependency and compatible machines
add DEFAULT_PREFERENCE = "-1" to disable git recipe
Added libx11 for GL support to DEPENDS
Use BROKEN to disable qemuarm and qemumips world build of qemu target
Robert Yang [Tue, 17 May 2011 03:57:21 +0000 (21:57 -0600)]
Add a skeleton for init scripts
Add a skeleton for init scripts, the original structure is from
/etc/init.d/skeleton of Ubuntu 10.10, it is in sysvinit_2.87dsf, so add
the COPYRIGHT(GPLv2) of sysvinit_2.87dsf. Modified the original skeleton
a lot to make it as easy as possible, just use posix shell command, and
have tested it with core-image-minimal.
* The skeleton implements the following actions:
- start, stop, restart, status, try-restart and force-reload.
# force-reload is a alias of try-restart.
- not implements reload, since only a few programs have it, just leave
it as placeholder.
* Add /usr/sbin/skeleton-test to test /etc/init.d/skeleton
* The /etc/init.d/skeleton can be run and output the example messages:
1) #./skeleton start (test start)
Starting skeleton ...
2) #./skeleton start (test start again when running)
skeleton already running (1078).
3) #./skeleton status (test status when running)
skeleton is running (1078).
Robert Yang [Tue, 17 May 2011 15:35:57 +0000 (09:35 -0600)]
Add pidofproc to ${sysconfdir}/init.d/functions
Add pidofproc to ${sysconfdir}/init.d/functions, this is used for
getting the pid of the process. It uses pidof to implement currently, it
may also use the pidfile or ps to implement in the future.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
