Robert Yang [Mon, 25 Jul 2016 08:16:27 +0000 (01:16 -0700)]
gnu-efi: 3.0.3 -> 3.0.4
* Remove gnu-efi-Make-setjmp.S-portable-to-ARM.patch since it is already
in the source.
* Updated LIC_FILES_CHKSUM
- The following files are gone:
lib/arm/div64.S
lib/arm/lib1funcs.S
- Updated md5sum for other files, they add the following words, which are
still GPLv2+:
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice and this list of conditions, without modification.
2. The name of the author may not be used to endorse or promote products
derived from this software without specific prior written permission.
Alternatively, this software may be distributed under the terms of the
GNU General Public License as published by the Free Software Foundation;
either version 2 of the License, or (at your option) any later version.
* Remove -mfpmath=sse from TUNE_CCARGS since gnu-efi doesn't support sse to fix the
problem:
rtdata.c:1:0: error: SSE instruction set disabled, using 387 arithmetics [-Werror]
* gnu-efi's Makefile treats prefix as toolchain prefix, so don't export it,
otherwise there would be errors:
/bin/sh: /usrgcc: No such file or directory
* Add aarch64-initplat.c-fix-const-qualifier.patch to fix build on aarch64:
initplat.c:44:35: error: initialization discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Mon, 25 Jul 2016 08:16:26 +0000 (01:16 -0700)]
guile: 2.0.11 -> 2.0.12
* Remove these patches which already in the source:
- libguile-VM-ASM_MUL-for-ARM-Add-earlyclobber.patch
- remove_strcase_l_funcs.patch
- 0001-libguile-Check-for-strtol_l-during-configure.patch
Richard Purdie [Fri, 22 Jul 2016 15:22:12 +0000 (16:22 +0100)]
linux-yocto-dev: Ensure we don't reparse the recipe when its not being used (take 2)
The use of the ${AUTOREV} variable means bitbake would always re-parse the
recipe. This isn't desirable when its disabled so undo the always parsing
flag in this case.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 22 Jul 2016 14:25:43 +0000 (15:25 +0100)]
siteinfo: Add mechanism to extend siteinfo information from BSP layer
In order to add a new architecture or sub-architecture to OE, you currently
need to tweak the table in siteinfo.bbclass. This adds a mechanism so this
can be done from a BSP layer. It needs a function definition which needs
a class file but can then be done with something like:
Richard Purdie [Fri, 22 Jul 2016 14:25:00 +0000 (15:25 +0100)]
insane: Add mechanism to extend QA machine information from BSP layer
In order to add a new architecture or sub-architecture to OE, you currently
need to tweak the table in insane.bbclass. This adds a mechanism so this
can be done from a BSP layer. It needs a function definition which needs
a class file but can then be done with something like:
Kai Kang [Mon, 18 Jul 2016 09:06:36 +0000 (17:06 +0800)]
boost: fix CVE-2012-2677
Backport patch to fix CVE-2012-2677 for boost from:
https://svn.boost.org/trac/boost/changeset/78326
Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mark Hatle [Tue, 19 Jul 2016 07:42:32 +0000 (15:42 +0800)]
package_manager.py: Avoid installing an empty package list
It is possible in an attempt only install, that everything listed is not
available to be installed. This will have the effect of clearing the
package list. However, we only check for an empty package list at
the beginning of the function. We need to also check before running the
install, otherwise we can fail due to 'error: no package(s) given".
Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Mingli Yu <mingli.yu@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ed Bartosh [Thu, 30 Jun 2016 16:29:18 +0000 (19:29 +0300)]
wic: rawcopy: make source filenames unique
Rawcopy plugin copies source files to build folder before using them
to assemble result image. After assembling the image wic renames
source files to <image>.p<partition number>. If the same source file
is used in multiple partitions wic breaks trying to rename file that
doesn't exist.
Added <line number> suffix to the files when copying them to the
build dir. This should make filename unique even if the same source
file is used for multiple partitions.
[YOCTO #9826]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ed Bartosh [Fri, 8 Jul 2016 14:35:20 +0000 (17:35 +0300)]
buildhistory-diff: reduce PKGR noise
When using PR service the buildhistory-diff output contains a lot of
PKGR changes: In practice the mass of PKGR updates hide other important
changes as they often account for 80% of all changes.
Skipped incremental and decremental changes of PKGR versions to reduce
amount of the script output. All changes are still included in the
output if script is run with -a/--report-all command line option.
[YOCTO #9755]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
systemd: allow add users to groups in rootfs postprocess
Currently the functionality checks for the "u" and "g" flags to create users and
groups, but not the "m" flag to add users to groups. This change first checks to
be sure that the users and groups are created, creates them if necessary, then
adds the user to the group.
Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
initrdscripts/init-install*: Select install target instead of looping through
Its not immediately apparent that more than one install target could be
available. With this change we list the available devices up front then
prompt the user for which one to use, reducing confusion.
Fixes [YOCTO #9919].
Signed-off-by: California Sullivan <california.l.sullivan@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
oeqa/controllers: Add test target for Systemd-boot
A new test target is neede to test Systemd-boot similar
to gummiboot. Created a copy of GummibootTarget class
and named as SystemdbootTarget, at this point the
gummibootTarget will remain until documentation is
updated with new systed information.
Signed-off-by: Jose Perez Carranza <jose.perez.carranza@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Tue, 19 Jul 2016 11:04:12 +0000 (12:04 +0100)]
intltool: remove broken XML::Parser detection
intltool.m4 has a chunk of code that runs during configure which probes for a
perl binary and verifies that it has the XML::Parser module. However in builds
using intltool-native the perl binary that it finds is likely to not be the one
that the intltool scripts will be using as the scripts hardcode nativeperl yet
the m4 fragment searches for "perl" in $PATH. If the host perl doesn't have
XML::Parser the configure will fail, despite the fact that the scripts will
work.
Solve this by taking an old patch from the upstream bug system to simply remove
the check in intltool.m4 as it's generally useless, and remove existing patches
that almost but not quite solved this issue.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Jussi Kukkonen [Fri, 15 Jul 2016 07:13:31 +0000 (10:13 +0300)]
mesa: Upgrade 11.2.2 -> 12.0.1
Massive mesa upgrade (OpenGL 4.3, GLVND support, vulkan driver
for intel etc), although many new things are disabled by default.
License file change does not change the actual licenses.
piglit results (with piglit update on ML) on an old NUC with Intel
HD5000 for reference:
pass: 33972
fail: 306
crash: 2
skip: 30857
warn: 7
total: 65144
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Jussi Kukkonen [Mon, 18 Jul 2016 11:54:48 +0000 (14:54 +0300)]
mesa-demos: Require X11 distro feature
Mesa-demos theoretically does not require X11 (apart from xdemos/)
but reality is that every other binary requires glut. So:
* 'non-glut' part of mesa-demos requires X11
* current freeglut recipe also depends on X11
There is apparently wayland support in freeglut now: This recipe
should be modified when meta-oe freeglut recipe has that feature.
The change became necessary now because mesa no longer mistakenly
installs GL files when X11 is disabled (and mesa-demos configure
currently requires GL).
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Robert Yang [Mon, 18 Jul 2016 03:05:52 +0000 (20:05 -0700)]
xmlto: only target requires coreutils
The coreutils added to RDEPENDS was for tail command which is everywhere
on the build host, so only add it to target. There was a side effect if
coreutils-native was build, when its commands install to sysroots, they
would be removed during rebuild, and cause other recipes fail to build:
/path/to/tmp/sysroots/x86_64-linux/usr/bin/mkdir -p lib/sys
make: /path/to/tmp/sysroots/x86_64-linux/usr/bin/mkdir: Command not found
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Robert Yang [Tue, 24 May 2016 02:34:18 +0000 (19:34 -0700)]
tcl: fix sed command in do_install
The -I= and -L= is used for cross compile, target doesn't need, and
binconfig.class can handle usr/bin/crossscripts/tclConfig.sh.
Fix do_configure error for the recipe which uses tclConfig.sh, for
example, postgresql.do_configure:
configure: error: header file <tcl.h> is required for Tcl
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Jussi Kukkonen [Fri, 15 Jul 2016 12:20:04 +0000 (15:20 +0300)]
libmatchbox: Upgrade 1.11 -> 1.12
libmatchbox now has a in-tree xsettings-client.
* Use git SRC_URI like the other matchbox components.
* Remove upstreamed patch.
* Update license info (xsettings code is MIT).
* Stop depending on libxsettings-client
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ed Bartosh [Fri, 15 Jul 2016 06:53:47 +0000 (09:53 +0300)]
wic: oe-selftest: build bmap-tools-native
bmap-tools-native is required to generate .bmap file. Without it
wic fails with this error when run with --bmap option:
Error: A native program bmaptool required to build
the image was not found
Added bmap-tools-native to the list of requirements to build
in Wic.setUpLocal method.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Bobby Bingham (2):
remove or1k version of sem.h
remove obsolete gitignore rules
Rich Felker (4):
remove obsolete and unused gethostbyaddr implementation
fix asctime day/month names not to vary by locale
fix regression in tcsetattr on all mips archs
revert unrelated change that slipped into last commit
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Wed, 6 Jul 2016 09:54:29 +0000 (10:54 +0100)]
glibc: use the host locale archive in nativesdk builds
The nativesdk libc when used by buildtools has a hard requirement on supporting
a UTF-8 locale because Python 3 needs a UTF-8 locale. However we currently only
ship the C locale, which means that Python attempts to lookup the user's locale
(for example, en_NZ.UTF-8) in the locale archive under it's prefix it fails and
falls back to C. This the results in Python using ASCII instead of UTF-8 for
file encoding, and bitbake breaks.
Th obvious solution would be to ship all locales, but this would add
approximately 250MB to the size of the buildtools tarball (which is currently
around 30MB). Generating a binary locale archive reduces this down to 100MB,
but this is still a drastic increase in footprint. If we ship a subset of
locales in the tarball then there will be users whose locale isn't in the
tarball, and they'll have to change their locale to an "approved" one, which
isn't the best of messages to send to new users.
The alternative is to tell the nativesdk libc that the locale archive isn't
under it own prefix but is in fact at /usr/lib/locale/locale-archive, so the
buildtools libc uses the host locale archive. The locale archive format appears
to be at least fairly stable: our glibc 2.24 can read the locale archive
generated by glibc 2.17 (Centos 7).
[ YOCTO #9775 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
* Fix build breakage when using configure option --enable-sha256
* Do not remove packages if removal operation is not valid due to
installed dependents
Signed-off-by: Alejandro del Castillo <alejandro.delcastillo@ni.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Paul Eggleton [Wed, 13 Jul 2016 21:04:25 +0000 (09:04 +1200)]
devtool: add finish subcommand
Add a subcommand which will "finish" the work on a recipe. This is
effectively the same as update-recipe followed by reset, except that the
destination layer is required and it will do the right thing depending
on the situation - if the recipe file itself is in the workspace (e.g.
as a result of devtool add), the recipe file and any associated files
will be moved to the destination layer; or if the destination layer is
the one containing the original recipe, the recipe will be overwritten;
otherwise a bbappend will be created to apply the changes. In all cases
the layer path can be loosely specified - it could be a layer name, or
a partial path into a recipe. In the case of upgrades, devtool finish
will also take care of deleting the old recipe.
This avoids the user having to figure out the correct actions when
they're done - they just do "devtool finish recipename layername" and
it saves their work and then removes the recipe from the workspace.
Addresses [YOCTO #8594].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Paul Eggleton [Wed, 13 Jul 2016 21:04:24 +0000 (09:04 +1200)]
devtool: upgrade: record original recipe files
This provides us with the information we need to remove the original
version recipe and associated files when running "devtool finish" after
"devtool upgrade".
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Paul Eggleton [Wed, 13 Jul 2016 21:04:21 +0000 (09:04 +1200)]
lib/oe/recipeutils: fix a few issues in find_layerdir()
* Allow the function to be called with the base layer path (in which
case it will just return the same path)
* Ensure that the function doesn't recurse indefinitely if it's called
on a file that's not inside a layer
* Correct the doc comment for accuracy
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Paul Eggleton [Wed, 13 Jul 2016 21:04:20 +0000 (09:04 +1200)]
devtool: update-recipe: don't copy local files that haven't changed
If there are files in the oe-local-files directory which are identical
to the original version, then we shouldn't be copying them to the
destination layer. This is particularly important when using the -a
option to create a bbappend.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Paul Eggleton [Wed, 13 Jul 2016 21:04:19 +0000 (09:04 +1200)]
devtool: update-recipe: find and use existing files directories
devtool update-recipe was defaulting to the ${BPN} named directory when
adding patches next to a recipe, but that meant if you already had files
in a ${BP} named directory (i.e. name and version) or "files" then you'd
end up with two directories next to the recipe, which is usually not
what you want. To avoid this, look through FILESPATH and take the first
one that's the same level or one level down from the recipe and already
exists, if any.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Thu, 14 Jul 2016 09:21:51 +0000 (10:21 +0100)]
bash: fix string format errors when enabling security flags
If security_flags.inc is included then bash 3.2.48 fails to build:
| ../bash-3.2.48/print_cmd.c:1152:3: error: format not a string literal and no format arguments [-Werror=format-security]
| cprintf (indentation_string);
Backport a patch from upstream to solve this.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Jussi Kukkonen [Wed, 13 Jul 2016 17:00:33 +0000 (20:00 +0300)]
piglit: Upgrade version, use python3
* Remove backported patch
* Update dependencies to use python3 modules, add depencies added
in the new version
* Install only stripped binaries to keep size down
* Fix bash-completion install location
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Wed, 13 Jul 2016 14:34:53 +0000 (15:34 +0100)]
oe/lib/package: handle shlibs files disappearing
During a parallel build it's possible for unrelated shlib files to be removed if
the recipe they came from is about to be rebuilt. They can't be involved in the
dependency chains as otherwise they wouldn't be removed, so just silently handle
files disappearing.
[ YOCTO #8555 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Wed, 13 Jul 2016 12:45:02 +0000 (13:45 +0100)]
bitbake.conf: use ${prefix} to define exec_prefix
This was simply changing prefix will relocate everything which is generally the
intention, whilst still allowing the variables to be set independently.
Signed-off-by: Ross Burton <ross.burton@intel.com>
site: Move rsync_cv_HAVE_C99_VSNPRINTF to common-linux
If we do not cache is then configure in distcc will try
to compute it using AC_TRY_RUN which will give some result
on x86-64 host when target is x86-64 but it generally is wrong
for cross compilation. We therefore cache it for all linux
targets.
This issue is highlighted by clang when compiling distcc
where it figures that its cross compiling and therefore triggers
it to include its own implementation of snprintf() which does
not go well with clang, gcc compiles it fine thats why we
never saw the problem thus far.
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Add a patch to disable a clang specific warning
and avoid passing clang options to gcc when we have
cross compiler is clang but host compiler is gcc
We do not need to use target cflags when building
native pieces and hence avoid the inter-mixing of
compiler options
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Jussi Kukkonen [Tue, 12 Jul 2016 11:14:51 +0000 (14:14 +0300)]
python-six: Add to oe-core
Recipes are moved from meta-openembedded/meta-python
Changes compared to meta-python version:
* Modified to not inherit pypi
* Fix python-io dependency for python3
* Support native, nativesdk
* Do not install .egg
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
python3: update manifest RDEPENDS for importlib and compression packages
zipfile.py has dependencies on importlib, threading, and shell
importlib has a dependency on lang
operator and contextlib added to the lang package instead of falling into misc
Reintroduce the use of cross-libtool when building the target package
this fails otherwise with clang
| ./libtool --mode=execute true db_printlog
| /usr/lib/libstdc++.so: file not recognized: File format not recognized
| clang-3.9: error: linker command failed with exit code 1 (use -v to see invocation)
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Patrick Ohly [Tue, 12 Jul 2016 13:24:26 +0000 (15:24 +0200)]
initramfs-framework: make rootfs module optional
It still gets installed by default via RRECOMMENDS without having to update
users of the framework (because without it, the framework is incomplete),
but that recommendation can be overridden on a per-image basis.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Maciej Borzecki [Tue, 12 Jul 2016 11:37:25 +0000 (13:37 +0200)]
wic: mountpoint is an optional argument
According to wic documentation partition mount point is an optional
argument. Skipping mount point also makes sense in certain
configurations when one needs to specify a partition that is not mounted
by the running system, such as a recovery or a mirror partition (in dual
rootfs setups).
Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Tue, 12 Jul 2016 09:23:18 +0000 (10:23 +0100)]
report-error: replace build paths with markers not whitespace
To remove potentially personal information and reduce irrelevant noise when
searching for similar reports the error reporting class removes ${TOPDIR} from
the logs. Whilst this is valid intention, the replacement of ' ' results in
potentially confusing logs as it appears that builds are happening in /tmp, or
whitespace can appear in places where it isn't allowed which can look like a
bug.
Solve both of these by replacing the value of TOPDIR with the literal string
TOPDIR.
Also replace TMPDIR after TOPDIR, as it's not uncommon to have TMPDIR somewhere
other than directly under TOPDIR.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Tue, 12 Jul 2016 07:54:38 +0000 (08:54 +0100)]
rpm: remove CVS-based recipe
This recipe doesn't really get used or maintained, and as the sole recipe in
oe-core that uses the CVS fetcher it's removal means we don't need to list CVS
as a host dependency.
Signed-off-by: Ross Burton <ross.burton@intel.com>
