Make the v4l PACKAGECONFIG option control building of the video4linux2
plug-in (not use of libv4l, as it did before) and enable by default.
Add a separate libv4l PACKAGECONFIG to control use of libv4l (disabled
by default since libv4l is not part of oe-core).
The default config for gst-plugins-good and gstreamer1.0-plugins-good
is now aligned with regards to v4l, ie:
v4l support: enabled by default
v4l use of libgudev: enabled by default
v4l use of libv4l2: disabled by default
This commit fixes the following build-deps QA Warnings:
WARNING: QA Issue: gst-plugins-good-video4linux2 rdepends on libudev, but it isn't a build dependency? [build-deps]
WARNING: QA Issue: gst-plugins-good-video4linux2 rdepends on libgudev, but it isn't a build dependency? [build-deps]
Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Tanu Kaskinen [Thu, 19 Mar 2015 08:17:33 +0000 (10:17 +0200)]
pulseaudio: remove obsolete resampler patching
This sed script hasn't worked since PulseAudio 0.9.8 (released in
2007), because the match condition refers to "sinc-fastest", while the
default resampler is nowadays speex-float-1.
The idea behind the sed script might be good, but it seems obvious
that nobody is actually depending on the script, so let's just delete
it.
Signed-off-by: Tanu Kaskinen <tanu.kaskinen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Bruce Ashfield [Thu, 5 Mar 2015 14:04:01 +0000 (09:04 -0500)]
kernel-yocto: split meta data generation from patching phase
The linux-yocto kernel has a meta-data component which accompanies the
actual tree. That meta-data is processed to generate a series file that
controls the patching and configuration of the kernel.
patching and configuration are two distinct phases, so when working on
kernel configuration, it doesn't make sense to always have to re-run
the patching step just to update configuration data in the meta-series.
To allow a more granular set of tasks, we break the meta-data generation
into a separate task, which runs before do_patch. This allows the task
to be explicitly called when working on configuration, but otherwise
has no impact on the build.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Bruce Ashfield [Wed, 4 Mar 2015 20:17:44 +0000 (15:17 -0500)]
kern-tools: fix iterative configuration runs
When fixing a kernel configuration warning, it is often necessary to
modify the kernel's meta-data and re-run the tools to update and
re-audit the config. This implies that the patch, config and audit
steps are run multiple times.
The tools had a bug that would incorrectly restore old meta-data
versus using updated configuration. Updating the kern-tools SRCREV
to fix the issue.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Peter Urbanec [Thu, 26 Feb 2015 17:31:33 +0000 (04:31 +1100)]
gstreamer1.0: Shorten __FILE__ in gst_debug_log output on all platforms.
On WIN32 the file argument to gst_debug_log_valist is shortened to just
the filename. This is useful not only for MSVC, but also with gcc/Linux
when doing cross-compilation builds and out-of-tree builds.
Signed-off-by: Peter Urbanec <openembedded-devel@urbanec.net> Signed-off-by: Ross Burton <ross.burton@intel.com>
Chen Qi [Thu, 5 Mar 2015 08:06:03 +0000 (16:06 +0800)]
dbus-test: make do_install run to trigger the effect of cleandirs flag
For now, we would meet the following QA error if we build dbus-test in
the same build directory with multilib enabled/disabled.
The steps are as follows:
1. Enable multilib and `bitbake dbus-ptest'
2. Disable multilib and `bitbake dbus-ptest'
The error message is as follows:
ERROR: QA Issue: dbus-test: Files/directories were installed but not shipped
/usr/lib64
/usr/lib64/dbus-test
/usr/lib64/dbus-test/ptest
/usr/lib64/dbus-test/ptest/run-ptest
...
The problem is that the ${D} is not cleaned up at the second build while it
should be.
This patch fixes the above problem.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Khem Raj [Thu, 5 Mar 2015 18:10:36 +0000 (18:10 +0000)]
tcmode-default: Define one gdb version
Sometimes we need to override the gdb from third party
tool SDKs, this helps out, moreover it also makes it consistent
with in OE-Core too to have multiple versions of gdb if we ever
needed to
Tanu Kaskinen [Mon, 16 Mar 2015 18:55:24 +0000 (20:55 +0200)]
pulseaudio: move client.conf to libpulse
This fixes a scenario where the system has libpulse installed but not
pulseaudio-server. The "breakage" didn't have any big practical
effects, though, because the default client.conf contains only
comments anyway.
Signed-off-by: Tanu Kaskinen <tanu.kaskinen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Saul Wold [Mon, 16 Mar 2015 17:21:30 +0000 (11:21 -0600)]
package_manager: Create variable for install_dir_name
This patch creates a variable for the install_dir name so it can be
something other than /install, also by doing this we can correctly
clean up the empty directories (/install/tmp) during the clean-up
phase. The new default is /oe_install so as to not conflict with other
possible packages that might use /install to place files.
[YOCTO #7353]
Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Paul Eggleton [Fri, 13 Mar 2015 18:27:06 +0000 (18:27 +0000)]
oe-selftest: add a test for devtool deploy-target
Whilst this test would seemingly be better placed as a runtime test,
unfortunately the runtime tests run under bitbake and you can't run
devtool within bitbake (since devtool needs to run bitbake itself).
Additionally we are testing build-time functionality as well, so
really this has to be done as an oe-selftest test.
This test does have a few perhaps unusual requirements in order to run:
* pexpect is installed
* MACHINE is set to one of the qemu machines
* runqemu tap devices have been set up
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Paul Eggleton [Mon, 16 Mar 2015 10:05:27 +0000 (10:05 +0000)]
gitignore: exclude meta-selftest, drop meta-hob
* We don't want to ignore changes in the meta-selftest directory
* While I'm at it, meta-hob has been gone for a while now, so drop the
reference to it here.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Paul Eggleton [Tue, 10 Mar 2015 14:42:36 +0000 (14:42 +0000)]
devtool: deploy-target: add dry-run option
Add a dry-run option to the deploy-target and undeploy-target
subcommands so you can see the list of files to be deployed or
un-deployed before actually carrying out the operation.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Paul Eggleton [Mon, 9 Mar 2015 13:57:56 +0000 (13:57 +0000)]
classes/externalsrc: fix for recipes that fetch local files
If SRC_URI contains local files (file:// references) these will almost
certainly be required at some point during the build process, so we need
to actually fetch these to ${WORKDIR} as we would normally.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Paul Eggleton [Sun, 8 Mar 2015 13:03:33 +0000 (13:03 +0000)]
devtool: deploy-target: add an option to disable quiet mode
The -q option to scp does stop the progress being shown, which is mostly
superfluous, however it also stops errors from ssh being shown - if
there's a problem, you'll just get "lost connection" which really isn't
that helpful. As a compromise, add a -s/--show-status option and
advertise this when the command fails.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
If you're testing with multiple images/devices that have the same IP
address / hostname then it can be annoying to deal with host key
mismatches all of the time. As a MITM attack is unlikely in the local
test environment, provide a command line option to pass the appropriate
options to scp/ssh to disable the host key checking.
Note: if you wish to apply this permanently, the best way is to do it
through your ssh configuration e.g. by adding the following to your
~/.ssh/config:
Host 192.168.7.2
UserKnownHostsFile=/dev/null
StrictHostKeyChecking no
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Paul Eggleton [Thu, 5 Mar 2015 10:51:20 +0000 (10:51 +0000)]
devtool: modify/extract: prevent usage with incompatible recipes
Consolidate code for checking compatible recipes and consider meta and
packagegroup recipes as well as package-index and gcc-source to be
incompatible.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Paul Eggleton [Wed, 4 Mar 2015 13:20:37 +0000 (13:20 +0000)]
devtool: modify: get correct initial revision from previously extracted source tree
If you point devtool modify to a source tree previously created by
devtool modify or devtool extract, then we need to try to pick up the
correct initial revision so that devtool update-recipe knows where to
start looking for commits that match up with patches in the recipe.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Patrick Ohly [Fri, 13 Mar 2015 12:04:08 +0000 (13:04 +0100)]
combo-layer-hook-default.sh: handle patches without Signed-off-by
Inserting the "From rev" comment depended on having at least one
Signed-off-by line in the patch header. Some old repository commits in
openembedded-core and bitbake do not have those.
When inporting those, just insert at the end of the patch
header. While doing so, ensure that there's exactly one blank line
since the last non-blank line.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Patrick Ohly [Fri, 13 Mar 2015 11:57:16 +0000 (12:57 +0100)]
combo-layer-hook-default.sh: beware of embedded patches
Patching the subject line must be limited to the subject of
the main patch itself. In particular, git formatted patches embedded in the patch must not be changed.
Achieved by limiting the replacement to the lines until the first
subject in the patch, just as it is done for modifying the first
Signed-off-by.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
The existing patch might already have the desired prefix, perhaps
even multiple times (due to some previous import error). Ensure
that after the replace, the prefix is present exactly once.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Patrick Ohly [Thu, 12 Mar 2015 16:09:41 +0000 (17:09 +0100)]
combo-layer: partial import for '--history init'
The new "since_revision" property can be used to cut off the imported
history at some point. This is useful to keep the resulting repository
smaller while still preserving enough history that "git annotate"
reports the right author and commit for most lines.
The initial, squashed import commit shows up with "unknown" as author
in the "git annotate" output. It has the repository name as prefix
in the subject line; importing that commit works best with a
layer hook which does not add the repository name again when
it is already present. Adding it here is useful for hooks
which do not extend the subject line.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Patrick Ohly [Thu, 12 Mar 2015 15:45:34 +0000 (16:45 +0100)]
combo-layer: combine trees via replacement objects
Instead of local graft entries rooting the imported branches in the
shared root commit, use replacement objects.
The advantage is that they get moved around by "git push" and "git
fetch", so everyone has the same, nicer view with everything starting
at the beginning of the combined repository.
If undesired, these objects can be removed with "git replace".
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Patrick Ohly [Thu, 12 Mar 2015 13:29:21 +0000 (14:29 +0100)]
combo-layer: init with full history
The new --history parameter enables a new mode in "combo-layer init"
where it copies the entire history of the components into the new
combined repository. This also imports merge commits.
Moving into a destination directory and applying commit hooks
is done via "git filter-branch" of the upstream branch. File
filtering uses the same code as before and just applies it
to that filtered branch to create the final commit which
then gets merged into the master branch of the new repository.
When multiple components are involved, they all get merged
into a single commit with an octopus merge. This depends
on a common ancestor, which is grafted onto the filtered
branches via .git/info/grafts.
These grafts are currently left in place. However, they do not get
pushed, so the local view on the entire history (all branches rooted
in the initial, empty commit, temporarily diverging and then
converging) is not the same as what others will see (branches starting
independently and converging). Perhaps "git replace" should be used
instead.
The final commit needs to be done manually, as before. A commit
message with some tracking information is ready for use as-is. This
information should be sufficient to implement also "combo-layer
update" using this approach, if desired. The advantage would be that
merge commits with conflict resolution would not longer break
the update.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Patrick Ohly [Tue, 10 Mar 2015 08:56:03 +0000 (09:56 +0100)]
combo-layer: exclude files
Some combined repos intentionally do not include certain files.
For example, Poky does not include bitbake's setup files and
OE-core's sample files under meta/conf.
When these files get modified in the upstream repository, applying the
patches fails and requires manual intervention. That is merely a
nuisance for someone familiar with the problem, but a real show
stopper when having the import run automatically or by someone less
experienced.
Therefore this change introduces "file_exclude", a new per-repo list
of file patterns which removes all matching files when initializing or
updating a combined repository. Because fnmatch is used under the hood
to match full path strings, removing entire directories must be done
with a pattern ending in a '/*' (in contrast to file_filter).
For Poky, the additional configuration looks like this:
[bitbake]
...
file_exclude = classes/base.bbclass
conf/bitbake.conf
.gitignore
MANIFEST.in
setup.py
TODO
Patrick Ohly [Tue, 10 Mar 2015 08:48:15 +0000 (09:48 +0100)]
combo-layer: runcmd() with separate output
Allow the caller to specify a separate output stream. stderr is always
a temporary file opened by runcmd(), so read from that to capture
output for error reporting *and* the return value.
The reasoning for the latter is a) that this preserves the traditional
behavior when out=None and b) if the caller wants the content of
stdout, it can read from the stream itself, which is not possible for
the temporary stderr.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Patrick Ohly [Mon, 9 Mar 2015 12:50:11 +0000 (13:50 +0100)]
combo-layer: make Signed-off-by optional
It depends on the diligence of the person running the combo-layer tool
whether the Signed-off-by line added to each commit actually indicates
that the person was involved in validating the change.
When the import is purely automatic, it is better to not add the line,
because the history is more useful without it (searching for the person
really only lists changes he or she was involved with) and it would
be a false statement.
The 'signoff' property can be set per repository, like every
other property. But setting it in the special [DEFAULT] section
is more useful, so that is what the example shows.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Patrick Ohly [Thu, 8 Jan 2015 15:23:52 +0000 (07:23 -0800)]
combo-layer: let user choose where properties get updated
When updating a property (at the moment, only 'last_revision'),
first check whether the user already added it to the main config.
If so, update there even if there is a local config.
This way, 'last_revision' can be shared between developers
as part of the repository while still configuring per-developer
repo paths outside of the git repository in a local config.
An example of a repository which is set up like that is tizen-distro,
with instructions for such a collaborative maintenance found here:
https://review.tizen.org/git/?p=scm/bb/tizen-distro.git;a=blob;f=README;hb=refs/heads/tizen-ivi
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Richard Purdie [Thu, 19 Mar 2015 11:32:42 +0000 (11:32 +0000)]
scripts/runqemu: Allow FSTYPE to be changed from the environment
Currently its not possible to change FSTYPE from the environment but it would
be useful to do so where multiple image types have been generated. This
adds that possibility.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Ross Burton <ross.burton@intel.com>
glibc provides NSS, other libc do not, so only add libnss-mdns to the
zeroconf package group for glibc.
This fixes the build of core-image-sato for e.g. uClibc
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Fabrice Coulon [Thu, 12 Mar 2015 14:36:55 +0000 (15:36 +0100)]
meta/lib/oe/package.py: fix files ownership in packages
This fix solves the problem with the ownership of files in packages.
The do_install task was producing correct and expected output but when
the files were being put in, e.g. a rpm package, the ownership could
be different than that in the do_install task.
[YOCTO #7428]
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Fabrice Coulon <fabrice.coulon@axis.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ed Bartosh [Mon, 16 Mar 2015 10:57:55 +0000 (12:57 +0200)]
wic: Consider PSEUDO_* environment variables
Used default values of PSEUDO_* environment variables only
if variables are not set.
This allows to set custom PSEUDO_PREFIX and other pseudo
variables in order to use pseudo database from non-standard
locations.
Change-Id: I0bc1af5e521121d1f96d590cb6edb23cf0cb0b83 Signed-off-by: Ed Bartosh <eduard.bartosh@intel.com> Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Martin Jansa [Fri, 13 Mar 2015 18:43:23 +0000 (19:43 +0100)]
rpcbind: don't try to enable rpcbind.socket twice
* rpcbind.service requires rpcbind.socket and systemctl tries to add it twice
* see log.do_rootfs:
Started /OE/build/shr-core/tmp-glibc/sysroots/x86_64-linux/usr/bin/systemctl --root=/OE/build/shr-core/tmp-glibc/work/nokia900-oe-linux-gnueabi/shr-image/2.0-r20/rootfs enable rpcbind.service rpcbind.socket
Try to find location of rpcbind.service...
Found rpcbind.service in /lib/systemd/system/rpcbind.service
Also=rpcbind.socket found in rpcbind.service
Started /OE/build/shr-core/tmp-glibc/sysroots/x86_64-linux/usr/bin/systemctl --root=/OE/build/shr-core/tmp-glibc/work/nokia900-oe-linux-gnueabi/shr-image/2.0-r20/rootfs enable rpcbind.socket
Try to find location of rpcbind.socket...
Found rpcbind.socket in /lib/systemd/system/rpcbind.socket
WantedBy=sockets.target found in rpcbind.socket
Enabled rpcbind.socket for sockets.target.
Try to find location of rpcbind.socket...
Found rpcbind.socket in /lib/systemd/system/rpcbind.socket
WantedBy=sockets.target found in rpcbind.socket
ln: failed to create symbolic link '/OE/build/shr-core/tmp-glibc/work/nokia900-oe-linux-gnueabi/shr-image/2.0-r20/rootfs/etc/systemd/system/sockets.target.wants/rpcbind.socket': File exists
Enabled rpcbind.socket for sockets.target.
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Martin Jansa [Fri, 13 Mar 2015 18:41:40 +0000 (19:41 +0100)]
systemctl: Don't try to remove directory which doesn't exist
Noticed in this log.do_rootfs error:
Started /OE/build/shr-core/tmp-glibc/sysroots/x86_64-linux/usr/bin/systemctl --root=/OE/build/shr-core/tmp-glibc/work/nokia900-oe-linux-gnueabi/shr-image/2.0-r20/rootfs disable bluetooth.service
Try to find location of bluetooth.service...
Found bluetooth.service in /lib/systemd/system/bluetooth.service
WantedBy=bluetooth.target found in bluetooth.service
rmdir: failed to remove '/OE/build/shr-core/tmp-glibc/work/nokia900-oe-linux-gnueabi/shr-image/2.0-r20/rootfs/etc/systemd/system/bluetooth.target.wants': No such file or directory
Disabled bluetooth.service for bluetooth.target.
Disabled bluetooth.service for dbus-org.bluez.service.
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Paul Eggleton [Mon, 16 Mar 2015 10:45:29 +0000 (10:45 +0000)]
oe-selftest: improve bitbake-layers tests
* Add a test for add-layer and remove-layer
* Correct message for test_bitbakelayers_showoverlayed()
* Improve test_bitbakelayers_flatten() to use a more unique name for the
temp output directory and clean it up using track_for_cleanup()
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
The source check was referring to oe-init-build-env instead of the
memres. It could be executed without the proper failure message and the
corresponding exit command out of the script. This commit makes the
memres script look more like the oe-init-build-env with the correct
script name.
[YOCTO #7487]
Signed-off-by: Benjamin Esquivel <benjamin.esquivel@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Randy Witt [Fri, 6 Mar 2015 22:15:33 +0000 (14:15 -0800)]
systemd: Fix journal "Failed to set file attributes:" warning
This is a backport of an upstream patch that fixes the
"Failed to set file attributes: Inappropriate ioctl for device" message
when the device exists on ext4 filesystems.
No functionality is changed, the patch just removes a potentially misleading
warning.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Robert Yang [Wed, 11 Mar 2015 08:35:39 +0000 (01:35 -0700)]
mailx: disable parallel build
The makeconfig can't run parallelly, otherwise the checking results
might be incorrect and lead to errors:
fio.c:56:17: fatal error: ssl.h: No such file or directory
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Wed, 11 Mar 2015 13:40:05 +0000 (13:40 +0000)]
util-linux: split libraries dynamically
util-linux has a number of utility libraries and not noticing a new one being
added in an upgrade results in many of the split-out core tools depending on the
entire package for the library. To prevent this happening in the future do the
library packaging dynamically.
As a side-effect libsmartcols.so is no longer packaged in util-linux so
util-linux-fdisk no longer depends on the full util-linux.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Rob Woolley [Mon, 9 Mar 2015 23:52:58 +0000 (19:52 -0400)]
logrotate: Identify CONFFILES
Some package formats explicitly track which files are configuration files
so that they are not overwritten on updates. We must use an explicit list
instead of a wildcard as logrotate also provides files under ${sysconfdir}
that are not configuration files.
Signed-off by: Rob Woolley <rob.woolley@windriver.com>
Rob Woolley [Mon, 9 Mar 2015 23:52:57 +0000 (19:52 -0400)]
nfs-utils: Identify CONFFILES
Some package formats explicitly track which files are configuration files
so that they are not overwritten on updates. We must use an explicit list
instead of a wildcard as nfs-utils-client provides files under
${localstatedir}/lib/nfs that are not configuration files.
Signed-off by: Rob Woolley <rob.woolley@windriver.com>
Rob Woolley [Mon, 9 Mar 2015 23:52:56 +0000 (19:52 -0400)]
nfs-utils: Install nfsmount.conf
The file nfsmount.conf is present in nfs-utils but not installed to the
filesystem. It has been added to nfs-utils-client as it seemed to be
missing accidentally rather than being removed intentionally. The binary
files in nfs-utils-client have a hard-coded reference to it and we
already provide the manpage for it in nfs-utils-doc.
Signed-off by: Rob Woolley <rob.woolley@windriver.com>
Kai Kang [Mon, 16 Feb 2015 02:41:14 +0000 (10:41 +0800)]
msmtp: add link file /usr/lib/sendmail
Link file /usr/lib/sendmail points to /usr/sbin/sendmail is required by
LSB core test according to Linux FHS: "For historical reasons,
/usr/lib/sendmail must be a symbolic link to /usr/sbin/sendmail if the
latter exists."
Create the link file /usr/lib/sendmail if it doesn't exist.
Kai Kang [Mon, 16 Feb 2015 02:25:03 +0000 (10:25 +0800)]
lsb: update init-functions and remove sendmail
According to LSB specification Ref1, LSB checks file
/lib/lsb/init-functions. But for 64 bits system it is installed in
/lib64. Install init-functions to /lib/lsb to conform with LSB
specification.
Link file /usr/lib/sendmail which points to /usr/sbin/sendmail is
required by LSB according to Linux FHS[Ref 2]. But it should be done by
packages which provides command sendmail such as msmtp, postfix and
esmtp etc.
There are a few parallel issues:
1)
../rbtree.o: error adding symbols: Invalid operation
collect2: error: ld returned 1 exit status
Makefile:42: recipe for target 'btt' failed
2)
git/blkiomon.c:216: undefined reference to `rb_insert_color'
collect2: error: ld returned 1 exit status
Makefile:27: recipe for target 'blkparse' failed
Robert Yang [Tue, 10 Mar 2015 09:23:13 +0000 (02:23 -0700)]
mtd-utils: disable parallel build
Disable parallel build because of:
git/.compr.c.dep:46: warning: NUL character seen; rest of line ignored
git/.compr.c.dep:47: *** missing separator. Stop.
Because both mkfs.jffs2 and mkfs.ubifs depend on compr.c, and
.compr.c.dep may generate twice at the same time.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Martin Jansa [Tue, 3 Mar 2015 07:40:47 +0000 (08:40 +0100)]
util-linux: move getopt u-a link to base_bindir
* busybox installs getopt u-a in base_bindir when GETOPT is enabled, move util-linux
link to the same location to fix calling u-a in read-only images
* remove unused variable usrbinprogs_a
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Robert Yang [Mon, 9 Mar 2015 06:34:00 +0000 (23:34 -0700)]
net-tools: fix SRC_URI
Fixed:
WARNING: Failed to fetch URL ftp://ftp.debian.org/debian/pool/main/n/net-tools/net-tools_1.60-25.diff.gz;apply=no;name=patch, attempting MIRRORS if available
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Robert Yang [Fri, 6 Mar 2015 02:23:36 +0000 (18:23 -0800)]
libevent: fix SRC_URI
The wget reported errors for the past URI since it can't follow the redirection well:
Connecting to cloud.github.com (cloud.github.com)|54.192.140.6|:443... connected.
OpenSSL: error:14077410:SSL routines:SSL23_GET_SERVER_HELLO:sslv3 alert handshake failure
Unable to establish SSL connection.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Robert Yang [Wed, 11 Mar 2015 08:35:41 +0000 (01:35 -0700)]
pixbufcache.bbclass: add harfbuzz-native to PIXBUFCACHE_SYSROOT_DEP
Fixed:
DEBUG: Executing shell function pixbufcache_sstate_postinst
g_module_open() failed for sysroots/x86_64-linux/usr/lib/gdk-pixbuf-2.0/2.10.0/loaders/libpixbufloader-svg.so: libharfbuzz.so.0: cannot open shared object file: No such file or directory
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
