Richard Purdie [Wed, 15 Jan 2014 17:47:45 +0000 (17:47 +0000)]
package_rpm: Fix a race with package_deb/package_ipk
We have the odd situation where the CONTROL/DEBIAN directory can be removed
in the middle of the walk, the isdir() test would then fail and the walk code
would assume its a file hence we check for the names in files too.
This resolves the autobuilder failure:
error: File not found: /home/pokybuild/yocto-autobuilder/yocto-slave/nightly-fsl-arm/build/build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/xinit/1_1.3.3-r0/package/DEBIAN
RPM build errors:
File not found: /home/pokybuild/yocto-autobuilder/yocto-slave/nightly-fsl-arm/build/build/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/xinit/1_1.3.3-r0/package/DEBIAN
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Andrew McDermott [Wed, 15 Jan 2014 23:03:51 +0000 (23:03 +0000)]
alsa-lib: remove hard-coded /usr/include in dev package
Specify the location of the alsa headers using ${includedir}. Without
this no headers get added to the image when the alsa-lib-dev package is
included.
Signed-off-by: Andrew McDermott <andrew.mcdermott@linaro.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Laurentiu Palcu [Thu, 16 Jan 2014 11:16:56 +0000 (13:16 +0200)]
nativesdk-packagegroup-sdk-host: reverse inherit order
Currently, tow successive toolchain builds for different hosts, will
issue a warning:
WARNING: The recipe nativesdk-packagegroup-sdk-host is trying to install
files into a shared area when those files already exist. Those files and
their manifest location are:
/ssd/work/yp1/build/tmp/deploy/ipk/all/nativesdk-packagegroup-sdk-host_1.0-r11_all.ipk
Matched in manifest-x86_64-nativesdk-packagegroup-sdk-host.package_write_ipk
Please verify which package should provide the above files.
That's because packagegroup is manually inherited after nativesdk which
is usually a BBCLASSEXTEND operation, done last.
[YOCTO #5396]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Wed, 15 Jan 2014 05:57:42 +0000 (00:57 -0500)]
linux-yocto/3.10: update meta data for media fragments
Updating the meta SRCREV to import the following changes:
d9cd83c0292b remove old MEDIA config fragments 06b76256d7e2 common-pc-standard.scc: Enable USB webcam support acb8b43837d8 common-pc-64.scc: update as per changes in the media config fragments 5513fd2ad72a minnow-standard.scc: Enable media features 172ba799bedc media-all.scc: A feature including all the media features 1a7e1d3a292e media-platform: A feature for platform media devices 03c48dacbb9a media-dvb-frontends : A feature for Digital Video Broadcast Devices 59b92b9d6c72 media-usb-tv: A feature for USB TV media adapters 5ec0709b1fed media-tuners: A feature for media tuner devices 356dc83e39f3 media-rc: A feature for remote control media devices 89d96cf9d574 media-radio: A feature for AM/FM radio devices 3dd2ebeaf49b media-pci-capture: A feature for PCI media capture devices 9ee0e95bfc52 media-i2c: A feature for I2C media devices 28976f4a3e27 media-usb-webcams: A feature for USB media devices f8206f4e00b1 media: A feature for media infrastructure 08bfb248a17f standard.scc: Add firmware loading feature e567a3d53593 firmware: A feature for firmware loading support
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Wed, 15 Jan 2014 14:10:54 +0000 (14:10 +0000)]
ltp: fix makefile race
There is a Makefile dependency race causing occasional build failures:
*** No rule to make target `.../work/core2-poky-linux/ltp/20130904-r0/git/testcases/kernel/include/linux_syscall_numbers.h.23161.sh', needed by `linux_syscall_numbers.h'. Stop.
This is due to a bad dependency wildcard that is matching more than the one file
it should match, so replace it with a concrete filename.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Anders Darander [Wed, 15 Jan 2014 07:31:02 +0000 (08:31 +0100)]
systemd-compat-units: remove dnsmasq from sysv disabled list
The dnsmasq recipe in meta-networking ships a dnsmasq.service file, that will
correctly override the SysV init script. Thus, as pointed out by Ross Burton,
we should remove dnsmasq from the list.
Signed-off-by: Anders Darander <anders@chargestorm.se> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Chen Qi [Wed, 15 Jan 2014 07:10:14 +0000 (15:10 +0800)]
shutdown-desktop: use poweroff for the Exec field in the shutdown.desktop
Use 'poweroff' instead of 'halt' for the Exec field in the shutdown.desktop.
The purpose of this patch is to make the 'shutdown' icon on on our sato
images work as expected for both sysvinit and systemd images. Previously,
the Exec field was 'halt'. The `halt' command could poweroff the system
in sysvinit images but it only could halt the system in systemd images.
The difference is due to the different implementations of the `halt' command.
In sysvinit, the `halt' command will effective execute `/sbin/init 0'. This
is for the compatibility with sysvinit 2.4, as stated in the comments of the
source code. In systemd, the `halt' command will effectively execute the
reboot(RB_HALT_SYSTEM).
As the 'shutdown' icon is expected to actually shutdown the system, we should
use poweroff instead of halt for its Exec field.
[YOCTO #4347]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Wed, 15 Jan 2014 12:13:54 +0000 (12:13 +0000)]
dbus-ptest: disable systemd
Explicitly disable systemd support so that it isn't a floating dependency and
libsystemd-login doesn't become a runtime dependency on non-systemd images.
Also don't bother setting the systemd unit directory as we're not installing
anything.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
are not generally useful on target systems. Also, their presence in the
same binary package as libharfbuzz.so defeats the debian package autonamer.
Inherit lib_package to move these to ${PN}-bin.
Signed-off-by: Phil Blundell <pb@pbcl.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Tue, 14 Jan 2014 15:19:26 +0000 (15:19 +0000)]
cmake: specify all install paths
Specify the full set of install paths (bindir, libdir, etc) for packages that
use the GNUInstallDirs module, instead of just the prefix and leaving the rest
as default (which breaks with multilib).
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Mon, 13 Jan 2014 17:26:51 +0000 (17:26 +0000)]
grub-efi: remove configure patch, simply seed the cache
grub-2.00-disable-help2man patches configure.ac to disable the help2man check
because we don't need the man pages. It also then patches configure itself so
that autogen.sh doesn't have to be called for performance reasons. However,
do_configure causes a full autoreconf so this optimisation is moot, and can
cause patch failures when an existing build tree is re-used.
Instead, simply use CACHED_CONFIGUREVARS to tell configure that it can't find
help2man.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Tue, 14 Jan 2014 02:42:13 +0000 (10:42 +0800)]
alsa-tools: fix the AUTOMAKE_DIR
There should be only one automake under the STAGING_DATADIR_NATIVE in
theory, but der_steffi@gmx.de has reported an odd problem which seemed
like that there are more than one. However, the "automake
--print-libdir" is the regular way to locate automake libdir.
[YOCTO #5706]
Reported-by: der_steffi@gmx.de Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Tue, 14 Jan 2014 11:43:14 +0000 (11:43 +0000)]
ptest: d.keys() is slow, use a list instead
Unfortunately d.keys is extremely slow. Using a list in this case should be
fine since the addtask lines are immediately above the code and aren't
going to change often.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Tue, 14 Jan 2014 11:42:38 +0000 (11:42 +0000)]
eglibc-locale: Fix depends on binutils
The dependency here needs to apply for nativesdk as well as target packages
as the autobuilder just tripped over that. We'd never want a native version
so I'm not sure why the target class override was even present. The dependency
also applies to do_package so lets be explicit about that in case sstate
decides to get clever.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Tue, 3 Dec 2013 15:42:58 +0000 (15:42 +0000)]
cmake: respect ${S} and ${B}
Instead of the class-specific variables OECMAKE_BUILDPATH and
OECMAKE_SOURCEPATH, just use ${B} and ${S}.
If these two paths are different, delete any existing ${B} before running a
build so that previous builds don't taint the current build.
Note that OECMAKE_SOURCEPATH and OECMAKE_BUILDPATH are not respected, so recipes
that manually set these in the past will need to be updated to either use
something along the lines of separatebuilddir.inc or set B themselves. If the
old variables are set, a warning is displayed.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Paul Eggleton [Tue, 17 Dec 2013 12:04:15 +0000 (12:04 +0000)]
dropbear: upgrade to 2013.62
LIC_FILES_CHKSUM has changed with the introduction of a BSD-3-Clause
algorithm (curve25519-donna); this has prompted a re-evaluation of the
LICENSE value which should now reflect the licenses declared in the
upstream documentation. Thanks to Beth Flanagan for helping with this.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Nathan Rossi [Fri, 10 Jan 2014 08:01:33 +0000 (18:01 +1000)]
ptest.bblass: Fix package QA issues when disabled
When the ptest distro feature is disabled, a ptest directory is still
created in the install phase, This directory is not cleaned up or
consumed by any package and will throw a QA error, e.g.
ERROR: QA Issue: glib-2.0: Files/directories were installed but not
shipped
/usr/lib/glib-2.0/ptest
ERROR: QA run found fatal errors. Please consider fixing them.
ERROR: Function failed: do_package_qa
This is caused by the do_install_ptest_base[cleandirs] attribute which
is not setup to be conditional on ptest being enabled.
This patch refactors the use of PTEST_ENABLED in the *ptest_base tasks,
replacing the conditional execution with the removal of the tasks from
the build, this prevents any part (including cleandirs) of the ptest
tasks from executing when disabled.
Ross Burton [Thu, 9 Jan 2014 16:01:51 +0000 (16:01 +0000)]
oeqa/runtime/systemd: wait for services to start/fail
When checking that no services have failed to start, actually wait for services
to finish starting by waiting for there not be no units in the "activating"
state.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Anders Darander [Fri, 10 Jan 2014 14:59:01 +0000 (15:59 +0100)]
terminal.bbclass: do not export PS1
With a complex PS1 setup, PS1 might not have all characters correctly escaped
when terminal.bbclass writes the export. This caused the run.do_terminal.PID to
terminate, making it impossible to use the devshell.
As the spawned shell will parse e.g. .bashrc (or whatever rc-file is being
used), PS1 will be reset in the devshell.
Signed-off-by: Anders Darander <anders@chargestorm.se> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Phil Blundell [Fri, 10 Jan 2014 14:38:32 +0000 (14:38 +0000)]
package: Keep global pkgfiles[] up to date when snapping library symlinks
Since ca86603607a69a17cc5540d69de0e242b33382d3 we are now calling stat() on
all the pkgfiles[] during emit_pkgdata(). If symlink snapping has removed
some of the files then we will blow up trying to stat a path that no longer
exists. Fix that by ensuring that pkgfiles[] is updated when we process the
list of library renames.
Signed-off-by: Phil Blundell <pb@pbcl.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Phil Blundell [Fri, 10 Jan 2014 12:54:16 +0000 (12:54 +0000)]
binutils: Also add autoconf-native to DEPENDS
Commit 616354f13732d13c17434d5b60b166f691c25761 is insufficient because
gnu-config-native's gnu-configize script uses perl modules from autoconf
and hence doesn't work unless autoconf-native is staged (which it may
not be if building from sstate).
Ideally g-c-n would itself declare a dependency on autoconf-native but this
is difficult to arrange without creating a dependency loop. autoconf-native
already depends on gnu-config-native (because autoreconf invokes gnu-configize)
and has a build dependency on m4-native, which in turn build-depends on g-c-n
because it configizes itself by steam in do_configure and needs config.{guess,sub}
to be available. Adding some sort of gnu-config-initial-native recipe would
fix the latter problem, but this would be ugly because it would need special-casing
in (at least) autotools.bbclass, and in any case this still wouldn't solve
the problem of autoconf itself depending on g-c-n.
So, the easiest solution to the problem at hand is to arrange for those
few recipes that depend on g-c-n but not autoconf-native to gain that
latter dependency as well.
Signed-off-by: Phil Blundell <pb@pbcl.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Phil Blundell [Fri, 10 Jan 2014 12:57:02 +0000 (12:57 +0000)]
kernel-module-split: Remove extraneous call to depmod from module postinst
During rootfs construction, image.bbclass will call depmod after all the
modules are installed. There's no need to run it from the postinst when
operating in offline root mode.
Signed-off-by: Phil Blundell <pb@pbcl.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Phil Blundell [Thu, 9 Jan 2014 11:16:10 +0000 (11:16 +0000)]
libsoup: Remove libproxy from DEPENDS
Although libsoup did use to support direct usage of libproxy, it hasn't
done so for some time. Worse, if libsoup depends on libproxy then it
is impossible to build libproxy against webkit since webkit itself
depends on libsoup in some configurations. Fix this by removing the
extraneous entry from DEPENDS.
Signed-off-by: Phil Blundell <pb@pbcl.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Phil Blundell [Thu, 9 Jan 2014 11:18:26 +0000 (11:18 +0000)]
qemu: Remove stray .git files after unpacking
The qemu tarball ships some extraneous .git metadata in the dtc/ and pixman/
subfolders, containing a reference to the path "../.git/modules" which
doesn't exist. The presence of these files will confuse git if it happens
to recurse into the qemu source folder during an operation on some parent
directory, for example "git clean" at a higher level. Avoid that problem
(mostly) by removing them immediately after the sources are unpacked.
Signed-off-by: Phil Blundell <pb@pbcl.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
libpam: add a new 'nullok_secure' option support to pam_unix
'null_ok_secure' option was fixed. Since that commit 'su' stopped working in
pseudo terminals (created in X environments) for root-accounts with empty
password.
Background: The PAM configuration for 'su' includes 'common-auth' which uses
'nullok_secure' option for pam_unix.
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Chen Qi [Mon, 23 Dec 2013 08:16:47 +0000 (03:16 -0500)]
busybox: enable SEAMLESS_XZ by default
We have enabled SEAMLESS_GZ and SEAMLESS_BZ2 in defconfig, it's
reasonable for us to enable SEAMLESS_XZ as well. Otherwise, we
couldn't extract tar.xz file while we could extract tar.gz file.
Such situation would be somewhat confusing.
Cristian Iorga [Wed, 8 Jan 2014 10:13:26 +0000 (12:13 +0200)]
qemu: upgrade to 1.7.0
linux-user-Handle-SOCK_CLOEXEC-NONBLOCK-if-unavailab.patch
file no longer needed, included in upstream.
qemu-native tested on all architectures,
host machine is Ubuntu Linux 13.10 x86-64.
Basic X11 and networking tests performed.
Paul Barker [Mon, 6 Jan 2014 11:55:14 +0000 (11:55 +0000)]
libarchive: Upgrade to v3.1.2
All patches against libarchive in oe-core appear to be merged into the latest
release. The license checksum has changed because a couple of referenced files
have been renamed but there is no change to the license terms themselves.
Signed-off-by: Paul Barker <paul@paulbarker.me.uk> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Ming Liu [Thu, 14 Nov 2013 10:51:28 +0000 (18:51 +0800)]
sstate: Add optimizing logic for crosssdk setscene dependencies
This patch mainly aims to add optimisation for crosssdk setscene dependency
validating which we haven't handled in current logic, and which I think we
could have as we've already implemented to native/cross, although there
are albeit not many crossdk tasks, we could still get some performance
enhancement.
Signed-off-by: Ming Liu <ming.liu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Kevin Baker [Sat, 4 Jan 2014 04:46:05 +0000 (22:46 -0600)]
screen: update debian patchset to version 4.0.3-14
This recipe used an old version of the debian update patchset from Lenny which
does not exist anymore on Debian's FTP servers. Update to the latest set
version 4.0.3-14 which also includes some minor bug fixes and security updates.
Cleanly builds and runs in our armv7a-vfp-neon environment.
Signed-off-by: Kevin Baker <kbaker@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Sat, 4 Jan 2014 17:20:20 +0000 (18:20 +0100)]
python: explicitly disable bluetooth.h check
* bluetooth.h is autodetected from sysroot and influences 2 python files:
/usr/include/python2.7/pyconfig-32.h
/usr/lib/python2.7/lib-dynload/_socket.so
* it doesn't link with bluez, so it wasn't detected by
test-dependencies.sh, but still causes undeterministic builds and
should be fixed
* we can use PACKAGECONFIG, but I don't expect many people to use bt
support in python-socket
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Koen Kooi [Mon, 6 Jan 2014 11:01:25 +0000 (12:01 +0100)]
grub: add git version
Recently grub git gained support for ARM builds (using u-boot or EFI as first stage loader) and with 2 extra patches we get support for 64-bit ARM as well.
Buildtested for genericarmv7a, genericarmv8 and qemux86. The genericarmv8 build fails in do_package/strip due to a binutils problem.
Signed-off-by: Koen Kooi <koen.kooi@linaro.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
