Paul Eggleton [Tue, 12 Mar 2013 03:39:56 +0000 (03:39 +0000)]
lib/oe/lsb: enable getting distro ID when lsb_release is not installed
If lsb_release is not installed (as it may not be on headless/minimal
installations on distros whose LSB package has a long list of
dependencies) we need to gather the information directly from files in
/etc.
Fixes [YOCTO #4012].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jeremy Stashluk [Mon, 11 Mar 2013 17:05:22 +0000 (13:05 -0400)]
gst-plugins-gl: allow empty packages
The patch to Poky (git://git.yoctoproject.org/poky) commit bd73fa69f532ca3d81ec2452a79e7a333b3543c2 titled: "recipes: Fix
ALLOW_EMPTY with no package specified" breaks this recipe. This patch
specifies the allowed empty packages.
Signed-off-by: Jeremy Stashluk <jstashluk@dekaresearch.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Bruce Ashfield [Mon, 11 Mar 2013 13:25:12 +0000 (09:25 -0400)]
linux-yocto/3.8: update EDF configuration
The sched_deadline configuration fragmements were not optimal, so tweaking
the meta data to make an enable-only configuration fragment avaiable and
updating the options within that fragment.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Khem Raj [Mon, 11 Mar 2013 06:28:13 +0000 (23:28 -0700)]
gcc-4.7: Fix incorrect warning with -Wcast-qual
This patch backport the fix where -Wcast-qual
reports a bogus warning with 4.7.2, There is
no workaround in code that can be done to avoid
it hence the fix to gcc is backported.
NOTE: Reparsing files to collect dependency data
ERROR: Bitbake's cached basehash does not match the one we just generated
(/buildarea/lyang1/poky/meta/recipes-core/images/core-image-minimal.bb.do_rootfs)!
ERROR: The mismatched hashes were 8e44f2296f2d6cdf2ccb0236910ef59b and 46357d5e36713646b47b0fe2233e3c8c
This is caused by the BUILDNAME which is defined in cooker.py:
if not self.configuration.data.getVar("BUILDNAME"):
self.configuration.data.setVar("BUILDNAME", time.strftime('%Y%m%d%H%M'))
The time changes during the first parsing and reparsing, so there is the
error, we already have:
do_rootfs[vardepsexclude] += "BUILDNAME"
but what we need is
rootfs_xxx_do_rootfs[vardepsexclude] += "BUILDNAME"
The do_rootfs doesn't depend on BUILDNAME directly, but indirectly, the
depends tree is:
do_rootfs -> rootfs_xxx_do_rootfs -> BUILDNAME
So add BUILDNAME to rootfs_xxx_do_rootfs[vardepsexclude] would fix the
problem.
[YOCTO #3299]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Ross Burton [Sat, 9 Mar 2013 10:33:25 +0000 (10:33 +0000)]
base.bbclass: don't backfill features that already exist
It's too easy to cause rebuilds because the DISTRO_FEATURES have changed in
meaningless ways (such as re-ordering or duplicate items). Help stop this by
checking if the feature to be back-filled is already present.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Thu, 7 Mar 2013 13:41:37 +0000 (14:41 +0100)]
tune-cortexa*: Fix TUNE_FEATURES and PACKAGE_EXTRA_ARCHS for thf-neon
* all cortexa*thf-neon except cortexa8 were missing thumb feature from
TUNE_FEATURES_tune-armv7athf-neon
* all cortexa*thf-neon except cortexa8 included cortexa9t2-vfp instead
of cortexa9t2hf-vfp
* PACKAGE_EXTRA_ARCHS_tune-cortexa8thf-neon was including from armv7a
-PACKAGE_EXTRA_ARCHS_tune-armv7ahf-neon
+PACKAGE_EXTRA_ARCHS_tune-armv7athf-neon
* please do more testing for this, I'm sending this commit mostly
because I've noticed that new a7 and a15 differ from a8 more then I've
expected and I don't have any a7/a15 MACHINEs, feel free to extend
http://git.openembedded.org/openembedded-core-contrib/log/?h=jansa/tune2-test
to add and test fake a7/a15 configs
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tom Zanussi [Fri, 8 Mar 2013 00:39:01 +0000 (18:39 -0600)]
perf: rename perf_3.4 to perf
There's nothing kernel-version-specific about the perf_3.4 recipe, so
it's actually misnamed and misleading now that it also gets used with
the 3.8 kernel.
Since the recipe isn't tied to a specific PV, and simply uses
whatever's in STAGING_KERNEL_DIR, there's no reason to add anything
else either to the bare PN, so just use that as the recipe name.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tom Zanussi [Fri, 8 Mar 2013 00:39:00 +0000 (18:39 -0600)]
perf: rename perf.inc to perf-features.inc
The contents of perf.inc are really specific to perf features and
shouldn't use the generic perf.inc name, which implies common recipe
code. It's always confusing to open up this file and find out that's
not what it is.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Should yield "yyyy" when building for the beaglebone because
that is a more specific device than ti33x. However, without this
change the result is that the value is set to "xxxx" meaning the
more generic setting overrides the more specific setting.
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Chen Qi [Tue, 22 Jan 2013 02:34:09 +0000 (10:34 +0800)]
image.bbclass: add a hook funtion to support readonly rootfs
read_only_rootfs_hook: this funtion is invoked only if 'read-only-rootfs'
is in IMAGE_FEATURES. It tweaks some basic files and makes populate-
volatile.sh script run at rootfs time.
For now, it has real effect only if the init system is sysvinit.
Kang Kai [Mon, 25 Feb 2013 02:45:13 +0000 (10:45 +0800)]
dpkg: save output of postinstall scripts when image firstboot
When image feature "debug-tweaks" enabled, save output of postinstall
scripts to log file /var/log/postinstall.log when image first boot. And
the log file can be configured.
It also needs image feature "package-management" enabled. If not,
package run-postinsts will be installed and then all packages will be
configured by it. Command 'dpkg --configure' outputs nothing.
[YOCTO #3223]
Signed-off-by: Kang Kai <kai.kang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Kang Kai [Sun, 24 Feb 2013 12:06:25 +0000 (20:06 +0800)]
opkg: save output of postinst scripts when image first boot
When image feature "debug-tweaks" enabled, save output of postinstall
scripts to log file /var/log/postinstall.log when image first boot. And the
log file can be configured.
It also needs image feature "package-management" enabled. If not,
package run-postinsts will be installed and then all packages will be
configured by it. Command 'opkg configure' outputs nothing.
[YOCTO #3223]
Signed-off-by: Kang Kai <kai.kang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Olivier Guiter [Mon, 4 Mar 2013 18:06:13 +0000 (19:06 +0100)]
Near Field communication recipe for neard 0.9
The Linux NFC project aims to provide a full NFC support for Linux.
It is based on the neard NFC user space stack running on top of the
Linux kernel NFC subsystem.
The code generated using this recipe was tested on a ARM11 device, with
a kernel 3.6, using, for the NFC hardware, a USB dongle with the PN533
chipset (SCL3711)
* Summary:
This is used for printing what is about to happen between the current and last
builds, for example:
$ bitbake core-image-sato
# Edit some recipes
$ bitbake-whatchanged core-image-sato
The changes will be printed.
* Usage:
bitbake-whatchanged [[opts] recipe]
* Implementation summary:
- Use the "STAMPS_DIR=<path> bitbake -S recipe" to generate the new
stamps, compare these stamps to the one in the old stamps dir (tmp/stamps),
so we will get what are changed.
- When the "-v" (verbose) is not specified:
> Figure out the newly added tasks
> Figure out the PV (including PE) and PR changed tasks
> The left tasks are the ones that the "Dependencies" changed tasks
- When "-v" is specified:
> Figure out the newly added tasks
> Use bb.siggen.compare_sigfiles to figure out the details
* Output, for example (core-image-sato with different git tags)
and with recipes upgraded):
- without "-v":
Figuring out the STAMPS_DIR ...
Generating the new stamps ... (need several minutes)
=== Newly added tasks: (5 tasks)
core-image-sato: do_configure do_populate_lic do_install do_rootfs do_compile
# Note: This is because the "bitbake -S" always generate the sigdata for
# do_compile, do_rootfs and other task, we may need fix this from "bitbake -S"
We can only change the TMPDIR if we want to change the STAMP's location,
but the bb_cache.dat would be regenerated if TMPDIR changes, so add
STAMPS_DIR for constructing it, and add it to the BB_ENV_EXTRAWHITE,
this is very usefull for the "bitbake -S", since then it can be run by:
STAMPS_DIR=<path> bitbake -S <recipe>
which will avoid putting the stamps to ${TMPDIR}/stamps.
BTW, break the too long BB_ENV_EXTRAWHITE into several lines.
[YOCTO #1659]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Cristian Iorga [Mon, 4 Mar 2013 17:17:50 +0000 (19:17 +0200)]
connman: Wired inteface provisioned via qemu
- connman-conf package re-implemented
- connman 1.12 introduces provisioning for
wired interfaces also;
- wired interface settings are read from
kernel cmdline if present;
- after that are passed to connman as a
config file
- for BA, this is not needed, as BA will
have a network infrastructure to work with.
Hongxu Jia [Tue, 5 Mar 2013 02:50:15 +0000 (10:50 +0800)]
sanity.bbclass:check if necessary to add march to BUILD_CFLAGS
1, There are a set of GCC built-in functions for atomic memory access. The
definition given in the Intel documentation allows only for the use of the
types int, long, long long as well as their unsigned counterparts. GCC will
allow any integral scalar or pointer type that is 1, 2, 4, 8 or 16 bytes in
length, suffix `_n' where n is the size of the data type.Such as:
__sync_fetch_and_add_n
__sync_fetch_and_sub_n
__sync_fetch_and_or_n
__sync_fetch_and_and_n
__sync_fetch_and_xor_n
__sync_fetch_and_nand_n
The above builtins are intended to be compatible with those described in the
Intel Itanium Processor-specific Application Binary Interface, section 7.4.
2, The glib-2.0-native and qemu-native invoke the above builtin function with
suffix `_4', and glib-2.0-native uses __GCC_HAVE_SYNC_COMPARE_AND_SWAP_4 to
test the existance.
3, Not all above builtin functions are supported by all target processors.Such
as i386 does not support the functions with suffix `_4', but i486 or later
support.
4, Prior to GCC 4.5, on the Intel's processor, the default arch is i386 unless
GCC is built with the --with-arch switch. Since GCC 4.5 the default arch is
implied by the target.
5, If your host GCC is older than 4.5 and it is built without the --with-arch
switch, when you use the GCC to compile target, you should specify -march to
tell GCC what the target's arch is, otherwise i386 is used as default.
Above all, when use older GCC to compile glib-2.0-native or glib-2.0-native,
and the GCC incorrectly uses i386 as default, the above builtin function
with suffix `_4' is not referenced. We should have a check in sanity.bbclass
to tell the user if necessary to add march to BUILD_CFLAGS in this situation.
Ting Liu [Tue, 5 Mar 2013 14:33:32 +0000 (08:33 -0600)]
iproute2: Fix build failure on ppc64
Backport three patches from upstream for ppc64:
http://git.kernel.org/cgit/linux/kernel/git/shemminger/iproute2.git ae70d96 ipntable: more fixes for ppc64 a55a8fd fix dependency on sizeof(__u64) == sizeof(unsigned long long) a7c2882 ip: fix ipv6 ntable on ppc64
Signed-off-by: Ting Liu <b28495@freescale.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Chen Qi [Wed, 20 Feb 2013 03:28:37 +0000 (11:28 +0800)]
populate-volatile.sh: improve the handling of link config items
Previously, if there's a link config item in the config file like
l root root 1777 /tmp /var/tmp
and /tmp has existed, the symlink will not be created correctly.
Another example is the /run directory. If /run directory has been
created by some recipe or script before populate-volatile.sh runs,
the symlink of /run to /var/run will not be created correctly.
This patch ensures that the system creates symlinks exactly as the
config file tells it.
Chen Qi [Mon, 18 Feb 2013 09:14:49 +0000 (17:14 +0800)]
populate-volatile.sh: add ROOT_DIR variable to support running at rootfs time
For populate-volatile.sh script to run correctly both at rootfs time and
at system boot time, it needs to be aware of which situation it is now in.
We use the ROOT_DIR variable to indicate whether it is run at rootfs time or
not. ROOT_DIR being "/" indicates that this script is run at system boot time,
otherwise, it is run at rootfs time.
Also, we ignore failures when running this script at rootfs time.
For example, if ${ROOT_DIR}/var/dir1 is symlink to /var/volatile/dir1, it's
possible that the link is a dead link. So if we're going to create some file
under ${ROOT_DIR}/var/dir1, it will fail. But the failure does no harm,
because this script will always run at system boot time to set up the correct
files and directories.
* Fixes the following packaging error, if compiled with
-plugin-kbd-linuxinput:
| WARNING: For recipe qt4-embedded, the following files/directories were installed but not shipped in any package:
| WARNING: /usr/lib/qtopia/plugins/kbddrivers/.debug
| WARNING: /usr/lib/qtopia/plugins/kbddrivers/.debug/libqlinuxinputkbddriver.so
* No PR bump, because -plugin-kbd-linuxinput is not enabled
by default.
Signed-off-by: Andreas Oberritter <obi@opendreambox.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Tue, 5 Mar 2013 13:10:22 +0000 (13:10 +0000)]
package.bbclass: Ensure all .so files get stripped
It was realised that .so files which were not marked as executable were not
gettings stripped. This was wasting space in images. This patch ensures
they do get processed by the code correctly.
[YOCTO #3973]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Tue, 5 Mar 2013 12:42:35 +0000 (20:42 +0800)]
avahi: fix installed but not shipped warning
The avahi recipe has a warning when build without systemd feature:
WARNING: QA Issue: avahi: Files/directories were installed but not shipped
/usr/share/dbus-1
The /usr/share/dbus-1 is empty without systemd feature, there would be
/usr/share/dbus-1/system-services with systemd. Use rmdir to fix the
problem, and remove the ${datadir}/dbus-1/interfaces from the FILES list
which had been removed clearly by the do_install.
[YOCTO #3939]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tom Zanussi [Tue, 5 Mar 2013 05:20:27 +0000 (05:20 +0000)]
perf: disable PARALLEL_MAKE
Autobuilder builds periodically and now more frequently have been
failing because of a race between the perf build and the newly
separated libtraceevent - perf tries to link libtraceevent.a, which
hasn't finished building yet in those cases.
This disables the parallel build to prevent that.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When the do_package function was split into different sections, the vardeps
were not updated to match meaning some function changes weren't reflected
in the sstate checksums. Fix this.
[YOCTO #3980]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Mon, 4 Mar 2013 17:43:41 +0000 (17:43 +0000)]
populate_sdk_base/image: Fix races for variable mappings
When using the -c populate_sdk option, images are not generated quite as
they should be under certain circumstances. For example the dropbear
feature may not get replaced with openssh, leading to both being installed
with an appropriate rootfs failure.
This patch moves the remapping logic to later points in the code, ensuring
there is no conflict. The result is slightly simpler too as an added bonus.
[YOCTO #3749]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bb files: remove invalid config.sub/config.guess files (autotools will
generate the correct files)
allocate-larger-memory.patch: not needed anymore
fix-gcc-4.6-null-not-defined.patch: added
- include header that defines NULL
includes-fix.patch: not needed anymore
localefixes.patch: removed
- not necessary anymore (no compiling errors)
makerace.patch: adapted to the new version
no-ko-translation.patch: adapted to the new version
no-nls-dpkg.patch: added
- fix build without nls
noconfigure.patch: adapted to the new version
nodoc.patch: adapted to the new version (apply patch on all cases
because the doc generation needs docbook-xsl)
remove-redeclaration.patch: not needed anymore
truncate-filename.patch: moved
use-host.patch: adapted to the new version
no-curl.patch: adapted to the new version
disable-configure-in-makefile.patch: added
- do not run configure at do_compile
Signed-off-by: Constantin Musca <constantinx.musca@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Ross Burton [Mon, 4 Mar 2013 12:52:45 +0000 (12:52 +0000)]
default-providers: add default virtual provider for gtk-update-icon-cache
Use a virtual provider instead of a hard dependency so that if gtk+-native is
required in some configuration, this provider can be changed and then
gtk+-native and gtk-update-icon-cache-native won't be both built and conflict in
the sysroot.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Mon, 4 Mar 2013 12:52:44 +0000 (12:52 +0000)]
gtk-update-icon-cache-native: add
This recipe builds natively just the gtk-update-icon-cache binary that is
required to run the gtk-icon-cache.bbclass postinstall scripts.
The advantage of doing this is it means running 400 less tasks which takes four
minutes on my machine, as the alternative is building GTK+ natively (and so
libX11, freetype, fontconfig...).
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jackie Huang [Mon, 4 Mar 2013 01:34:30 +0000 (20:34 -0500)]
apr: add libtool to SSTATE_SCAN_FILES
The hardcoded paths in libtool will cause apache2 compile fail at
link stage when the package apr is installed from sstate cache, so
add libtool to SSTATE_SCAN_FILES.
[ CQID: WIND00405372 ]
Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Randy MacLeod <Randy.MacLeod@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sun, 3 Mar 2013 13:07:18 +0000 (13:07 +0000)]
buildhistory: Allow the version backwards check to be disabled
When the PR service is not enabled, the versions can go backwards and there
are cases we don't want to know about this. This patch adds a variable
allowing these checks to be turned off whilst still using buildhistory.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sun, 3 Mar 2013 15:54:29 +0000 (15:54 +0000)]
recipes: Fix ALLOW_EMPTY with no package specified
There are various usages of ALLOW_EMPTY with no packages specified. This
is not recommended syntax, nor is it likely to be supported in the future.
This patch improves the references in OE-Core, either removing them if they're
pointless (e.g. when PACKAGES="") or specifying which package it applies to.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
kernel-arch.bbclass: don't pass extra args to KERNEL_{CC, LD, AR}
Commit a3ca06c3b45c791dd38dbf154ad0fc62b4063475 added extra args to
KERNEL_CC, these revert that bit while maintaining machine additions
in TARGET_??_KERNEL_ARCH
Producing incorrect instructions and generating the following errors:
CC arch/powerpc/kernel/init_task.o
| {standard input}: Assembler messages:
| {standard input}:384: Error: junk at end of line: `1'
| {standard input}:949: Error: junk at end of line: `1'
| {standard input}:1428: Error: junk at end of line: `1'
| {standard input}:1526: Error: junk at end of line: `1'
| {standard input}:1626: Error: junk at end of line: `1'
| {standard input}:1685: Error: junk at end of line: `1'
| {standard input}:1973: Error: junk at end of line: `1'
| {standard input}:2001: Error: junk at end of line: `1'
| {standard input}:2100: Error: junk at end of line: `1'
| {standard input}:2168: Error: junk at end of line: `1'
| {standard input}:2520: Error: junk at end of line: `1'
| CC arch/powerpc/lib/locks.o
Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a more appropriate follow up patch from upstream. Also,
only powerpc64 requires libpfm4 currently for this specific
version of oprofile (x86, sparc can make use of libpfm but
don't make use of it here)
Additionally, this patch from upstream requires some more
patches to be pulled into oprofile
Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
