Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
This is because /tmp/oe-saved-tests was created by user A, while user B tries
to write data in it, then the error will happen. This patch can fix the
problem.
Move the dumped data to ${LOG_DIR}/runtime-hostdump/ rather than
/tmp/oe-saved-tests/ to fix the problem.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
Aníbal Limón [Wed, 2 Jan 2019 16:08:13 +0000 (10:08 -0600)]
meta/classes/testimage.bbclass: Only validate IMAGE_FSTYPES when is QEMU
When use simpleremote target the flash/boot process is executed
manually, the IMAGE_FSTYPES validation is only needed when execute
testimage against qemu.
The supported_fstypes comes from oeqa.core.target.qemu module.
Boot parameter systemd.log_target=console affects command journalctl's
output and causes oe selftest case test_systemd_boot_time fail to pass.
| Error at obtaining the boot time from journalctl
| RESULTS:
| RESULTS - systemd.SystemdJournalTests.test_systemd_boot_time - Testcase -1: SKIPPED (0.74s)
systemd.log_target=console was introduced by oe-core commit a0bb649 and
work with parameter systemd.log_level to enable systemd debug.
systemd.log_level has been removed already, so remove systemd.log_target
too to make case test_systemd_boot_time pass.
Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
Erik Botö [Fri, 14 Dec 2018 18:53:42 +0000 (19:53 +0100)]
testimage: Add possibility to pass parmeters to qemu
Add a variable called TEST_QEMUPARAMS in testimage.bbclass to make it
possible to pass parameters to qemu. This can be useful for e.g.
increasing the amount of RAM available during testimage runs.
Richard Purdie [Thu, 8 Nov 2018 19:57:49 +0000 (19:57 +0000)]
testimage: Simplfy DEFAULT_TEST_SUITES logic
Now that the tests have correct markup to automatically determine which images
they can run against, clean up the default test suites logic to be simpler
and not image specific.
Some cleanup of the compiler tests still needs to be completed but this
is a good first step.
The only downside to this is more noise during testing as we now see
many skipped messages for simple images like core-image-minimal.
The auto type is being removed since it currently breaks badly due to the
socat mandatory inclusion from the meta-selftest layer which is a problem
which needs to be addressed seperately.
Add test cases to test “exclude” and “installroot“ options, also modify
the logic of filtering packages on the feed to have all the packages
needed by the tests.
Federico Sauter [Wed, 5 Dec 2018 14:22:32 +0000 (14:22 +0000)]
kernel: don't assign the build user/host
The KBUILD_BUILD_USER and KBUILD_BUILD_HOST variables were
assigned at the kernel class level, which made it impossible
to override them in the local configuration.
By setting only the default values of those variables in the
kernel class, it is now possible to override them as expected.
[snip]
File "/buildarea1/lyang1/poky/meta/lib/oe/types.py", line 122, in boolean
raise ValueError("Invalid boolean value '%s'" % value)
ValueError: Invalid boolean value 'qemux86'
Now QEMU_USE_KVM can only be boolean, can not contain MACHINE any more, kvm
will be enabled if target_arch == build_arch or both of them are x86 archs.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
Douglas Royds [Thu, 20 Dec 2018 23:10:22 +0000 (12:10 +1300)]
patch: reproducibility: Fix host umask leakage
Some patch files create entirely new files, so their permissions are subject to
the host umask. If such a file is later installed into a package with no change
in permissions, it breaks the reproducibility of the package.
This was observed on libpam, for instance: The patch file
pam-security-abstract-securetty-handling.patch creates a new file
(tty_secure.c). This file is later copied into the -dbg package with no change
in permissions.
Without installing gitpython package, oe-git-archive will face error
below, where it was referencing key that was non-existent inside
metadata object.
Traceback (most recent call last):
File "<poky_dir>/scripts/oe-git-archive", line 271, in <module>
sys.exit(main())
File "<poky_dir>/scripts/oe-git-archive", line 229, in main
'commit_count': metadata['layers']['meta']['commit_count'],
KeyError: 'commit_count'
Fix this error by adding exception catch when referencing
non-existent key (based on inputs provided by Richard Purdie).
Richard Purdie [Wed, 18 Jul 2018 12:54:05 +0000 (13:54 +0100)]
package: Rework PACKAGELOCK based upon sstate for do_packagedata
I think this lock dates from before we had sstate for do_packagedata.
Since WORKDIR is recipe specific and we write into WORKDIR, we no longer need
any write locks in the do_packagedata code itself, its handled by the sstate
task lock for the final copy in at the end. The final write lock can be simply
removed.
The only time we need read locking is when actually reading data from the
shared directory. We can therefore reduce the window the lock is held
significantly as well, hence improving the speed of packagedata tasks running
in parallel.
QEMU_USE_KVM can either be a boolean or a whitespace separated list
of kvm supported machines.
For the 'intel-corei7-64' machine, defined in meta-intel, kvm could not be
used as the 'x86' substring is not part of its machine name.
By changing the order of this 'or' statement and setting
the 'QEMU_USE_KVM' variable to 'intel-corei7-64', it is possible to run the
'testimage' task with kvm support successfully.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
Armin Kuster [Wed, 2 Jan 2019 16:36:10 +0000 (08:36 -0800)]
tzdata/tzcode-native: update to 2018i
2018i:
Briefly:
São Tomé and Príncipe switches from +01 to +00 on 2019-01-01.
Changes to future timestamps
Due to a change in government, São Tomé and Príncipe switches back
from +01 to +00 on 2019-01-01 at 02:00. (Thanks to Vadim
Nasardinov and Michael Deckers.)
2018h:
Briefly:
Qyzylorda, Kazakhstan moved from +06 to +05 on 2018-12-21.
New zone Asia/Qostanay because Qostanay, Kazakhstan didn't move.
Metlakatla, Alaska observes PST this winter only.
Guess Morocco will continue to adjust clocks around Ramadan.
Add predictions for Iran from 2038 through 2090.
Changes to future timestamps
Guess that Morocco will continue to fall back just before and
spring forward just after Ramadan, the practice since 2012.
(Thanks to Maamar Abdelkader.) This means Morocco will observe
negative DST during Ramadan in main and vanguard formats, and in
rearguard format it stays in the +00 timezone and observes
ordinary DST in all months other than Ramadan. As before, extend
this guesswork to the year 2037. As a consequence, Morocco is
scheduled to observe three DST transitions in some Gregorian years
(e.g., 2033) due to the mismatch between the Gregorian and Islamic
calendars.
The table of exact transitions for Iranian DST has been extended.
It formerly cut off before the year 2038 in a nod to 32-bit time_t.
It now cuts off before 2091 as there is doubt about how the Persian
calendar will treat 2091. This change predicts DST transitions in
2038-9, 2042-3, and 2046-7 to occur one day later than previously
predicted. As before, post-cutoff transitions are approximated.
Changes to past and future timestamps
Qyzylorda (aka Kyzylorda) oblast in Kazakhstan moved from +06 to
+05 on 2018-12-21. This is a zone split as Qostanay (aka
Kostanay) did not switch, so create a zone Asia/Qostanay.
Metlakatla moved from Alaska to Pacific standard time on 2018-11-04.
It did not change clocks that day and remains on -08 this winter.
(Thanks to Ryan Stanley.) It will revert to the usual Alaska
rules next spring, so this change affects only timestamps
from 2018-11-04 through 2019-03-10.
Change to past timestamps
Kwajalein's 1993-08-20 transition from -12 to +12 was at 24:00,
not 00:00. I transcribed the time incorrectly from Shanks.
(Thanks to Phake Nick.)
Nauru's 1979 transition was on 02-10 at 02:00, not 05-01 at 00:00.
(Thanks to Phake Nick.)
Guam observed DST irregularly from 1959 through 1977.
(Thanks to Phake Nick.)
Hong Kong observed DST in 1941 starting 06-15 (not 04-01), then on
10-01 changed standard time to +08:30 (not +08). Its transition
back to +08 after WWII was on 1945-09-15, not the previous day.
Its 1904-10-30 change took effect at 01:00 +08 (not 00:00 LMT).
(Thanks to Phake Nick, Steve Allen, and Joseph Myers.) Also,
its 1952 fallback was on 11-02 (not 10-25).
This release contains many changes to timestamps before 1946 due
to Japanese possession or occupation of Pacific/Chuuk,
Pacific/Guam, Pacific/Kosrae, Pacific/Kwajalein, Pacific/Majuro,
Pacific/Nauru, Pacific/Palau, and Pacific/Pohnpei.
(Thanks to Phake Nick.)
Assume that the Spanish East Indies was like the Philippines and
observed American time until the end of 1844. This affects
Pacific/Chuuk, Pacific/Kosrae, Pacific/Palau, and Pacific/Pohnpei.
Changes to past tm_isdst flags
For the recent Morocco change, the tm_isdst flag should be 1 from
2018-10-27 00:00 to 2018-10-28 03:00. (Thanks to Michael Deckers.)
Give a URL to the official decree. (Thanks to Matt Johnson.)
Armin Kuster [Sun, 28 Oct 2018 23:38:32 +0000 (23:38 +0000)]
tzcode-native: update to 2018g
Changes to code
When generating TZif files with leap seconds, zic no longer uses a
format that trips up older 32-bit clients, fixing a bug introduced
in 2018f. (Reported by Daniel Fischer.) Also, the zic workaround
for QTBUG-53071 now also works for TZif files with leap seconds.
The translator to rearguard format now rewrites the line
"Rule Japan 1948 1951 - Sep Sat>=8 25:00 0 S" to
"Rule Japan 1948 1951 - Sep Sun>=9 1:00 0 S".
This caters to zic before 2007 and to Oracle TZUpdater 2.2.0
and earlier. (Reported by Christos Zoulas.)
Changes to past time zone abbreviations
Change HDT to HWT/HPT for WWII-era abbreviations in Hawaii.
This reverts to 2011h, as the abbreviation change in 2011i was
likely inadvertent.
Changes to documentation
tzfile.5 has new sections on interoperability issues.
Armin Kuster [Mon, 29 Oct 2018 01:29:32 +0000 (01:29 +0000)]
tzdata: update to 2018g
Changes to code
When generating TZif files with leap seconds, zic no longer uses a
format that trips up older 32-bit clients, fixing a bug introduced
in 2018f. (Reported by Daniel Fischer.) Also, the zic workaround
for QTBUG-53071 now also works for TZif files with leap seconds.
The translator to rearguard format now rewrites the line
"Rule Japan 1948 1951 - Sep Sat>=8 25:00 0 S" to
"Rule Japan 1948 1951 - Sep Sun>=9 1:00 0 S".
This caters to zic before 2007 and to Oracle TZUpdater 2.2.0
and earlier. (Reported by Christos Zoulas.)
Changes to past time zone abbreviations
Change HDT to HWT/HPT for WWII-era abbreviations in Hawaii.
This reverts to 2011h, as the abbreviation change in 2011i was
likely inadvertent.
Changes to documentation
tzfile.5 has new sections on interoperability issues.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
Richard Purdie [Wed, 5 Sep 2018 16:39:31 +0000 (17:39 +0100)]
busybox: Put klogd/syslogd alternative links in syslog package
Currently these are in ${PN} and ${PN}-syslog may get replaced by
other packages but update-alternatives would error in the postinst
if other files were installed first. Avoid the problems by putting
the links in the correct package.
Richard Purdie [Mon, 29 Oct 2018 13:49:24 +0000 (13:49 +0000)]
testsdk: Improvements to the json logging
Tweak the preceeding commit to:
* Add STARTTIME to the identifier to make it unique
* Add MACHINE to the identifier
* Use LOG_DIR
* Store the layer config in a more natural json format
* Drop '_' function prefixes
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Mon, 29 Oct 2018 13:49:14 +0000 (13:49 +0000)]
testimage: Improvements to the json logging
Tweak the preceeding commit to:
* Add STARTTIME to the identifier to make it unique
* Log DISTRO
* Use LOG_DIR
* Store the layer config in a more natural json format
* Drop '_' function prefixes
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 6 Dec 2018 23:25:49 +0000 (23:25 +0000)]
oeqa/selftest/esdk: Fix typo causing test failure
2018-12-06 23:19:24,564 - oe-selftest - INFO - Traceback (most recent call last):
File "/media/build1/poky-sumo/meta/lib/oeqa/core/case.py", line 32, in _oeSetUpClass
clss.setUpClassMethod()
File "/media/build1/poky-sumo/meta/lib/oeqa/selftest/cases/eSDK.py", line 78, in setUpClass
cls.tmpdir_eSDKQA = cls.tempdirobj.name
AttributeError: type object 'oeSDKExtSelfTest' has no attribute 'tempdirobj'
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Stefan Lendl [Tue, 27 Nov 2018 13:19:45 +0000 (14:19 +0100)]
default-versions.inc: Make PREFERRED_VERSION_openssl* overwritable
defaultsetup.conf and therefore default-versions.inc is sourced pretty late in bitbake.conf.
default-versions.inc overwrites previous assignments of PREFERRED_VERSION_openssl.
Assigning it with ?= allows other .conf files to assign correctly.
in particular assignment in conf/local.conf and machine config is used instead of default.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
INFO - ======================================================================
INFO - ERROR: setUpClass (eSDK.oeSDKExtSelfTest)
INFO - ----------------------------------------------------------------------
INFO - Traceback (most recent call last):
File "/home/pokybuild/yocto-worker/oe-selftest-debian/build/meta/lib/oeqa/core/case.py", line 32, in _oeSetUpClass
clss.setUpClassMethod()
File "/home/pokybuild/yocto-worker/oe-selftest-debian/build/meta/lib/oeqa/selftest/cases/eSDK.py", line 76, in setUpClass
cls.tmpdirobj = tempfile.TemporaryDirectory(prefix="selftest-esdk-", dir=bb_vars["WORKDIR"])
File "/usr/lib/python3.5/tempfile.py", line 929, in __init__
self.name = mkdtemp(suffix, prefix, dir)
File "/usr/lib/python3.5/tempfile.py", line 507, in mkdtemp
_os.mkdir(file, 0o700)
FileNotFoundError: [Errno 2] No such file or directory: '/home/pokybuild/yocto-worker/oe-selftest-debian/build/build/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0-r0/selftest-esdk-q7ln84gc'
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Having image-buildinfo enabled causes containerimage.ContainerImageTests.test_expected_files
to fail due to the presence of an unexpected file:
['./',
'./etc/',
- './etc/build',
'./etc/default/',
'./etc/default/postinst',
Tweak the class to allow it to be disabled and disable it from the test just in
case it was enabled.
Richard Purdie [Mon, 29 Oct 2018 13:46:52 +0000 (13:46 +0000)]
oeqa/utils/metadata: Allow to function without the git module
The python git module may or may not be enabled, allow this code to
function without it, falling back to the same method as metadata_scm.bbclass
uses. This will be cleaned up in the next round of feature development.
Yeoh Ee Peng [Tue, 23 Oct 2018 05:57:22 +0000 (13:57 +0800)]
testsdk.bbclass: write testresult to json files
As part of the solution to replace Testopia to store testresult,
OEQA sdk and sdkext need to output testresult into json files, where
these json testresult files will be stored into git repository
by the future test-case-management tools.
By default, json testresult file will be written to "oeqa"
directory under the "WORKDIR" directory.
To configure multiple instances of bitbake to write json testresult
to a single testresult file at custom directory, user will define
the variable "OEQA_JSON_RESULT_DIR" with the custom directory for
json testresult.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Yeoh Ee Peng [Tue, 23 Oct 2018 05:57:21 +0000 (13:57 +0800)]
testimage.bbclass: write testresult to json files
As part of the solution to replace Testopia to store testresult,
OEQA testimage need to output testresult into json files, where
these json testresult files will be stored into git repository
by the future test-case-management tools.
By default, json testresult file will be written to "oeqa"
directory under the "WORKDIR" directory.
To configure multiple instances of bitbake to write json testresult
to a single testresult file at custom directory, user will define
the variable "OEQA_JSON_RESULT_DIR" with the custom directory for
json testresult.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Yeoh Ee Peng [Tue, 23 Oct 2018 05:57:20 +0000 (13:57 +0800)]
oeqa/selftest/context: write testresult to json files
As part of the solution to replace Testopia to store testresult,
OEQA selftest need to output testresult into json files, where
these json testresult files will be stored into git repository
by the future test-case-management tools.
By default, json testresult file will be written to "oeqa"
directory under the oe-selftest log directory.
To configure multiple instances of bitbake to write json testresult
to a single testresult file at custom directory, user will define
the variable "OEQA_JSON_RESULT_DIR" with the custom directory for
json testresult.
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Tue, 13 Nov 2018 21:11:50 +0000 (21:11 +0000)]
oeqa/runner: Sort the test result output by result class
We want to see failures/errors listed last since this is the most easily
visible part of the log on consoles or autobuilder output and makes
human processing easier rather than having to scroll up and scan for
a single failure.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 2 Nov 2018 13:13:43 +0000 (13:13 +0000)]
oeqa/runtime/ptest: Inject results+logs into stored json results file
This allows the ptest results from ptest-runner, run in an image to be
transferred over to the resulting json results output.
Each test is given a pass/skip/fail so individual results can be monitored
and the raw log output from the ptest-runner is also dumped into the
results json file as this means after the fact debugging becomes much easier.
Currently the log output is not split up per test but that would make a good
future enhancement.
I attempted to implement this as python subTests however it failed as the
output was too confusing, subTests don't support any kind of log
output handling, subTest successes aren't logged and it was making things
far more complex than they needed to be.
We mark ptest-runner as "EXPECTEDFAILURE" since its unlikely every ptest
will pass currently and we don't want that to fail the whole image test run.
Its assumed there would be later analysis of the json output to determine
regressions. We do have to change the test runner code so that
'unexpectedsuccess' is not a failure.
Also, the test names are manipuated to remove spaces and brackets with
"_" used as a replacement and any duplicate occurrences truncated.
Yeoh Ee Peng [Tue, 23 Oct 2018 05:57:19 +0000 (13:57 +0800)]
oeqa/core/runner: write testresult to json files
As part of the solution to replace Testopia to store testresult,
OEQA need to output testresult into single json file, where json
testresult file will be stored in git repository by the future
test-case-management tools.
The json testresult file will store more than one set of results,
where each set of results was uniquely identified by the result_id.
The result_id would be like "runtime-qemux86-core-image-sato", where
it was a runtime test with target machine equal to qemux86 and running
on core-image-sato image. The json testresult file will only store
the latest test content for a given result_id. The json testresult
file contains the configuration (eg. COMMIT, BRANCH, MACHINE, IMAGE),
result (eg. PASSED, FAILED, ERROR), test log, and result_id.
Based on the destination json testresult file directory provided,
it could have multiple instances of bitbake trying to write json
testresult to a single testresult file, using locking a lockfile
alongside the results file directory to prevent races.
Also the library class inside this patch will be reused by the future
test-case-management tools to write json testresult for manual test
case executed.
Yeoh Ee Peng [Thu, 18 Oct 2018 09:11:05 +0000 (17:11 +0800)]
oeqa/core/runner: refactor for OEQA to write json testresult
Refactor the original _getDetailsNotPassed method to return
testresult details (test status and log), which will be reused
by future OEQA code to write json testresult.
Take the opportunity to consolidate and simplify the logic used
to gather test status and log within the TestResult instance.
Richard Purdie [Fri, 13 Jul 2018 12:13:10 +0000 (13:13 +0100)]
oeqa: Remove xmlrunner
This isn't present on modern distros by default and doesn't work with
testtools, needing multiple code paths in the code. Remove it in favour
of finding a better replacement for results collection/analysis.
Richard Purdie [Thu, 12 Jul 2018 11:10:38 +0000 (11:10 +0000)]
oeqa/core/threaded: Remove in favour of using concurrenttests
We have several options for parallel processing in oeqa, parallel
execution of modules, threading and mulitple processes for the runners.
After much experimentation is appears the most scalable and least
invasive approach is multiple processes using concurrenttestsuite
from testtools. This means we can drop the current threading code
which is only used by the sdk test execution.
Richard Purdie [Wed, 11 Jul 2018 11:46:01 +0000 (11:46 +0000)]
oeqa/runner: Ensure we don't print misleading results output
The current code assumes if something isn't a failure of some
kind, it was a pass. When test case IDs weren't matching, this lead
to very confusing output where things would fail, then be listed as
passing.
This adds code to track successes, ensuring we don't end up in this
position again with unmatched entries being listed as UNKNOWN.
Richard Purdie [Wed, 11 Jul 2018 11:03:31 +0000 (11:03 +0000)]
oeqa/core/runner: Improve test case comparision
We can directly compare the test case IDs rather than representations,
then if we're using subunit to split the tests, the comparisions still
work as intended.
Richard Purdie [Thu, 29 Nov 2018 12:07:53 +0000 (12:07 +0000)]
oeqa/selftest/context: Improve log file handling
The existing logfile is simply placed in the current directory. Since the test
changes cwd to BUILDDIR, the symlink to the log can be placed in an invalid
directory. We also see trackbacks if the symlink is invalid.
Improve things by:
* Placing logs in LOG_DIR (or BUILDDIR if unset).
* Using a full path to the log meaning the log and link are placed in the same directory.
* Using lexists instead of exists so invalid symlinks are handled correctly.
meta/lib/oeqa/selftest/context.py:8: DeprecationWarning: the imp module is deprecated in favour of importlib; see the module's documentation for alternative uses
import imp
Richard Purdie [Tue, 13 Nov 2018 21:16:54 +0000 (21:16 +0000)]
oeqa/loader: Fix deprecation warning
Clean up the warning:
meta/lib/oeqa/core/loader.py:27: DeprecationWarning: inspect.getargspec() is deprecated, use inspect.signature() or inspect.getfullargspec()
_failed_test_args = inspect.getargspec(unittest.loader._make_failed_test).args
Ross Burton [Mon, 3 Dec 2018 20:35:14 +0000 (20:35 +0000)]
oeqa: don't litter /tmp with temporary directories
If we need to create a temporary directory in targetbuild or buildproject use
tempfile.TemporaryDirectory so that when the test case is finished, the
directory is deleted.
Also synchronise the logic and don't possibly store the temporary directory in
self.tmpdir as nothing uses that.
Richard Purdie [Sun, 2 Dec 2018 11:23:17 +0000 (11:23 +0000)]
oeqa/utils/qemurunner: Avoid tracebacks on closed files
Reorder the shutdown/teardown to avoid:
File "/home/pokybuild/yocto-worker/oe-selftest-ubuntu/build/meta/lib/oeqa/utils/qemurunner.py", line 224, in launch
op = self.getOutput(output)
File "/home/pokybuild/yocto-worker/oe-selftest-ubuntu/build/meta/lib/oeqa/utils/qemurunner.py", line 90, in getOutput
fl = fcntl.fcntl(o, fcntl.F_GETFL)
ValueError: I/O operation on closed file
assertTrue doesn't give good debug information when things fail. Update
several to use assertIn which gives information upon failure, for the
others print the log information upon failure.
Ross Burton [Mon, 3 Dec 2018 11:47:58 +0000 (11:47 +0000)]
oeqa/oelib/path: don't leak temporary directories
setUp() is used to populate a directory of temporary files, and deleted in
__del__. However setUp() is called once *per test* so __del__ would only be
able to remove the last directory created.
Fix the code by using the natural counterpart to setUp, tearDown(), to clean up.
Richard Purdie [Thu, 29 Nov 2018 10:40:58 +0000 (10:40 +0000)]
oeqa/selftest/buildoptions: Ensure diskmon tests run consistently
Heartbeat events default to once a second and we need to ensure we have
enough time in the task to see them.
Add a nostamp delay task 5s long so we can have a consistently timed
task which doesn't need cleanup or have unneeded dependencies. This
ensures we should deterministically see the disk moinitor events
regardless of the state of the build. This is done in a way which
doesn't corrupt build state or need cleanup and is efficient.
Richard Purdie [Tue, 27 Nov 2018 23:38:44 +0000 (23:38 +0000)]
oeqa/utils/commands: Add extra qemu failure logging
Rather than just referring the user to the logs containing the failure, print
them on the console. This aids debugging with oe-selftest with parallelisation
as the logs may otherwise be lost.
Richard Purdie [Tue, 27 Nov 2018 12:19:39 +0000 (12:19 +0000)]
oeqa/selftest/buildoptions: Improve ccache test failure output
The current failure mode doesn't show us what the logs actually looked like
and later cleans can lose them. Show the whole log in case of failure
to aid debugging intermittent problems on the autobuilder.
Richard Purdie [Tue, 27 Nov 2018 12:03:50 +0000 (12:03 +0000)]
oeqa/selftest/case: Use bb.utils.remove() instead of shutil.remove()
This avoids problems where shutil.remove will error with:
File "/usr/lib/python3.5/shutil.py", line 436, in _rmtree_safe_fd
os.unlink(name, dir_fd=topfd)
FileNotFoundError: [Errno 2] No such file or directory: 'S.gpg-agent.extra'
when there are races over file deletion (gpg agent may be slow to exit).
We already worked around speed and race issues in bb.utils.
Richard Purdie [Sat, 24 Nov 2018 17:56:06 +0000 (17:56 +0000)]
oeqa/selftest/signing: Skip tests if gpg isn't found
Raising an assertionError in the class setup isn't a particuarly good way to
indicate gpg isn't installed. Instead skip the tests if the required binary
isn't present. For the signing tests we do require it to be present and can't
use a prebuilt one.
Richard Purdie [Wed, 28 Nov 2018 17:31:39 +0000 (17:31 +0000)]
scripts/runqemu: Improve lockfile handling for python with close_fd=True
On python versions with close_fds=True (python 3.2 onwards), the tap
device lockfile isn't passed to the child process.
Since this guards against use of an active interface, we really want this
here, so pass it in pass_fds. This means if the parent exits early, the child
still holds the lock, avoiding messages like:
runqemu - ERROR - Failed to run qemu: qemu-system-x86_64: could not configure /dev/net/tun (tap0): Device or resource busy
Richard Purdie [Wed, 28 Nov 2018 17:30:10 +0000 (17:30 +0000)]
scripts/runqemu: Tidy up lock handling code
Various tweaks:
- Balance up the aquire/release functions
- Use debug messge for both acquiring and release message for consistency in logs
- Use None instead of an empty string
- Reset the value of the field if we don't have the lock any more
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
scripts/runqemu: Replace subprocess.run() for compatibilty
subprocess.run() was introduced in Python 3.5. We currently support down to
Python 3.4 so I've replaced it with subprocess.check_call() which is available
in that version.
Signed-off-by: Michael Halstead <mhalstead@linuxfoundation.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Hundebøll [Thu, 15 Nov 2018 09:12:49 +0000 (10:12 +0100)]
busybox: make busybox.links.{suid, nosuid} reproducible
The busybox.link.* files are generated from autoconf.h and applets.h,
which are both auto-generated by the build system. The contents of the
two files might be in different order, and so the link files are not
reproducble as is.
Martin Hundebøll [Thu, 15 Nov 2018 09:12:48 +0000 (10:12 +0100)]
shadow: improve reproducibility by hard-coding shell path
The shadow configure script tries really hard to detect the running
shell to make sure it doesn't do unsupported calls.
On my system the shell is detected as /bin/sh, while a build in an
ubuntu docker it resolves to /bin/bash. And since the shell path is
baked into the target binaries through config.h, the build becomes
inreproducible.
Fix reproducibility by hard-coding the shell to be /bin/sh
Paul Eggleton [Thu, 22 Nov 2018 21:55:50 +0000 (10:55 +1300)]
socat: fix LICENSE
According to both the README and source headers, the LICENSE value for
socat is explicitly GPLv2, not v2 or later, so adjust LICENSE
accordingly (leaving aside whether "GPL-2.0+-with-OpenSSL-exception"
should actually be considered a valid LICENSE string or not).
Ross Burton [Wed, 19 Sep 2018 13:44:40 +0000 (14:44 +0100)]
gnupg: patch gnupg-native to allow path relocation
GnuPG hard-codes $bindir etc and uses them to find the helper binaries, such as
gpg-agent. This breaks if gnupg-native is reused from sstate for a different
build directory and GPG signing of packages is required.
Patch in getenv() checks for gnupg-native when returning the hardcoded paths,
and create a wrapper script which overrides GNUPG_BINDIR. There are more paths
that can be overridden, but this one is sufficient to make GnuPG work.
Armin Kuster [Tue, 13 Nov 2018 21:19:42 +0000 (13:19 -0800)]
dhcp: allow for excluding the external bind
There is a known issue when using ISC DHCP alongside bind 9.10. DHCP uses libraries
provided by bind and there is a bug which results in dhcpd/dhclient not
running in the background and not responding to sigterm.
The issue was first reported in 02/2015 by the fedora team here:
Signed-off-by: Mohamad Noor Alim Hussin <mohamad.noor.alim.hussin@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com>
Due to a bug in find [1], -ignore_readdir_race does not work correctly with
-delete. This can lead to spurious build failures when files disappear
while such a command is running; specifically this was seen in the case of
do_configure and do_populate_lic running concurrently for packages
with ${B} == ${WORKDIR}:
find: '.../sstate-build-populate_lic': No such file or directory
While the issue is fixed in the findutils git master, the find command of
the host system is called here, so we can't ensure that the used version
contains the fix. Many common distros have not updated to a recent enough
findutils version yet (Ubuntu 18.10 contains the fix, while 18.04 is still
affected).
Work around the issue by passing the output of find to 'rm -f' instead of
using -delete.
Fabien Lahoudere [Mon, 29 Oct 2018 11:02:29 +0000 (12:02 +0100)]
archiver: Drop unwanted directories
In sources directory we can find patches/ and temp/.
The first one is filled with symbolic link unusable on another
machines.
The second contains yocto logs to create this archives and are
typically copied when 'S = "${WORKDIR}"'
Kosta Zertsekel [Sun, 4 Nov 2018 19:24:46 +0000 (21:24 +0200)]
meta: Use double colon for chown OWNER:GROUP
Rationale - excerp from `info chown`
====================================
OWNER‘:’GROUP
If the OWNER is followed by a colon and a GROUP (a group name or
numeric group ID), with no spaces between them, the group ownership
of the files is changed as well (to GROUP).
Some older scripts may still use ‘.’ in place of the ‘:’ separator.
POSIX 1003.1-2001 (*note Standards conformance::) does not require
support for that, but for backward compatibility GNU ‘chown’ supports
‘.’ so long as no ambiguity results. New scripts should avoid the use
of ‘.’ because it is not portable, and because it has undesirable
results if the entire OWNER‘.’GROUP happens to identify a user whose
name contains ‘.’.
gcc-crosssdk buils leaks config.log's through "gcc-stashed-builddir" and
TARGET_* flags to libgcc cross-build through "gcc/libgcc.mvars" file
on "gcc-stashed-builddir". This means that if BUILD_CFLAGS contains
host-specific flags like "-isystem/usr/include" libgcc build will
fail "do_qa_configure" and "do_package_qa" checks.
Remove host-related flags from TARGET_* flags for gcc-crosssdk builds.
It's really good that OE supports multiple EFI_PROVIDERs and that
commit 9a1709278de87 ("wic: isoimage-isohybrid: use grub-efi from
deploy dir") makes re-use of the grub-efi built image, but we should
still respect the standard otherwise the ISO will not boot, so install
grub images as boot[x64|ia32].efi not ${PN}-boot[x64|ia32].efi.
Richard Purdie [Sat, 14 Jul 2018 11:02:07 +0000 (11:02 +0000)]
oeqa/selftest/wic: Ensure initramfs exists for test_iso_image
AssertionError: Command 'wic create mkhybridiso --image-name core-image-minimal -o /var/tmp/wic.oe-selftest/' returned non-zero exit status 1:
ERROR: _exec_cmd: gzip -f -9 -c /var/tmp/wic.oe-selftest/tmp.wic.drhn6edm/initrd.cpio > /var/tmp/wic.oe-selftest/tmp.wic.drhn6edm/initrd.cpio.gz returned '1' instead of 0
output: gzip: /var/tmp/wic.oe-selftest/tmp.wic.drhn6edm/initrd.cpio: No such file or directory
This is because in a clean build directory, the initramfs may not be rebuilt.
Add a call to ensure it is built to avoid the error.
For some reason, the copyright part was left out of the license
information included in LIC_FILES_CHKSUM, preventing it from being
used in, e.g., documentation to satisfy the requirements of the
license.
Zhixiong Chi [Tue, 18 Sep 2018 08:46:17 +0000 (01:46 -0700)]
curl: CVE-2018-14618
Backport the CVE patch from the upstream
https://github.com/curl/curl/commit/57d299a499155d4b327e341c6024e293b0418243.patch
https://curl.haxx.se/docs/CVE-2018-14618.html
https://nvd.nist.gov/vuln/detail/CVE-2018-14618
