Robert Yang [Wed, 11 Feb 2015 02:06:22 +0000 (18:06 -0800)]
libtool: don't execute automake and autoconf on every invocation
From the origin commit message:
Regression from 2.4.2 was causing noticable slow-down in builds
that call libtool many times.
* build-aux/ltmain.in (func_help): Override func_help() from
gl/build-aux/options-parser to only run automake --version and
autoconf --version when libtool --help is executed on the command
line.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Peter A. Bigot [Sun, 8 Feb 2015 18:42:13 +0000 (12:42 -0600)]
bluez5: upgrade to 5.28
- Fixes to GATT service discovery & probing
- Fix for bearer selection with dual-mode devices
- Fix potential crash when removing devices
- Fix issue with incomplete names in EIR data
- Fix parsing GATT name characteristics
- Fix AVCTP long press & key repetition handling
- Fixes for GATT notification handling
hex2hcd graduated to installed tool; two new noinst tools
See: http://www.bluez.org/release-of-bluez-5-28/ Signed-off-by: Peter A. Bigot <pab@pabigot.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Cristian Iorga [Thu, 12 Feb 2015 08:19:59 +0000 (10:19 +0200)]
ofono: upgrade to 1.16
- Fix issue with PIN retry handling;
- Fix issue with HFP and multiple calls;
- Add support for Distracted Driving Reduction;
- Add support for available technologies property;
- Add support for Telit location reporting driver;
- Add support for u-blox SARA-U270 modems;
- Add support for Quectel UC15 modems.
Saul Wold [Wed, 11 Feb 2015 18:12:14 +0000 (10:12 -0800)]
image: add new items to IMAGE_FEATURES[validitems] list
Add the new items to the validitems list, this is fully tested, initial testing
had been done with a local change that did not make the original commit request
[YOCTO #7308]
Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Wed, 11 Feb 2015 18:06:29 +0000 (18:06 +0000)]
gstreamer-plugins: don't ship files in ${PN}
${PN} generally should be empty as every file the GStreamer packages ship is
owned by a particular plugin or library, so enforce this behaviour by unsetting
FILES_${PN}.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Cristian Iorga [Wed, 11 Feb 2015 16:22:29 +0000 (18:22 +0200)]
gst-plugins-*, gstreamer1.0-plugins-*: fix main package binary components
Users often install the main package thinking it will bring in
all of the individual plugin packages, not realising that the
-meta package exists. Since the main package isn't currently
used for anything else, it would make more sense to just make
installing the main package install all of the plugins.
To do this in a manner that doesn't break any upgrade paths,
just add a dependency from the main package on the -meta
package for all of the gstreamer plugin recipes.
Fixes [YOCTO #5589].
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Paul Eggleton [Thu, 5 Feb 2015 15:08:22 +0000 (15:08 +0000)]
oe-pkgdata-util: improve command-line usage
* Use argparse instead of optparse for standardised help output, options
and a much cleaner code structure
* Look up pkgdata directory automatically so the user doesn't have to
specify it
* Use standard logging
NOTE: this does mean a slight change in syntax - if you do want to
specify the pkgdata directory (usually only necessary if you're calling
it from within the build process) you need to use the parameter -p (or
--pkgdata-dir) and specify this before the command, not after it.
Paul Gortmaker [Tue, 10 Feb 2015 19:17:38 +0000 (14:17 -0500)]
git: add basic tab completion support
Trying to use git w/o tab completion is especially annoying if
you are used to using it elsewhere -- "whatchanged" is simply
too annoying to type out in full more than once.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Paul Gortmaker [Tue, 10 Feb 2015 19:17:37 +0000 (14:17 -0500)]
git: expand recipe to take advantage of pre-gen'd manpages
These could be created from scratch from git itself, but it
requires asciidoc, xsltproc, python bits and too much other
baggage. Since the git folks issue a tarball with the manpages
for each release, it is simpler to just go get that.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Aníbal Limón [Tue, 10 Feb 2015 18:32:14 +0000 (12:32 -0600)]
xserver-xorg: Improvments in systemd-logind disable
Add packageconfig for systemd-logind instead of hard disable in
EXTRA_OECONF this allows users to use packageconfig also add
dependency of dbus because systemd-logind require it for communicate
with systemd.
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Paul Gortmaker [Wed, 21 Jan 2015 18:25:06 +0000 (13:25 -0500)]
base-files/profile: change EDITOR to not be busybox specific
Setting "EDITOR=/bin/vi" breaks on non-busybox systems, as
vim will populate /usr/bin/vi instead, and you get stuff like:
op3:~/poky/meta-builder$ git commit -s
error: cannot run /bin/vi: No such file or directory
error: unable to start editor '/bin/vi'
Please supply the message using either -m or -F option.
op3:~/poky/meta-builder$ which vi
/usr/bin/vi
op3:~/poky/meta-builder$
Since we've already specified a proper path above in the profile,
we've no need to call out where in the path vi lives, and hence
this will work with busybox and a full vim install w/o busybox.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Cristian Iorga [Tue, 10 Feb 2015 12:54:23 +0000 (14:54 +0200)]
connman: upgrade to 1.28
- Fixes an issue with DHCPv6 retransmission timer
calculation that causes system load to jump to 100%;
- All WiFi P2P issues encountered with Miracast have been addressed;
- ConnMan no longer hands off foreground autoscanning to
wpa_supplicant as it causes issues when finding hidden WiFi networks;
Other changes and fixes include:
- Several fixes for handling IPv6 contexts via oFono;
- Fix memory deallocation in exit code paths;
- Use OPEN auth_alg for wpa_supplicant open WiFi networks;
- A WiFi Access Point with unknown strength now has a proper
minimum value which translates to a service 'Strenght' property of 30;
- Fix byte order in DHCP server identifier;
- Properly cancel an ongoing service connect if the Agent exits.
btrfs emtpy partition creation is currently not working because of the
usage of the non existant variables rootfs ans extra_imagecmd. It also
as an incorrect size.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Introduce a new option --extra-space instead of using IMAGE_EXTRA_SPACE.
This is useful for boot partitions where the extra space is often
useless or for huge partition where 10MiB may not be enough.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
For some architectures it is necessary to reserve space on disk without
it being present in the partition table.
For example, u-boot on i.mx is placed at an offset of 1kB on the sdcard.
While it would be possible to create a partition at that offset and
place u-boot there, it would then be necessary to update the default
u-boot environment to use partition 2 on the mmc instead of partition 1.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Updating the SRCREV to import the following kern-tools patch:
kgit-meta: always clear series file on branch transitions
This was triggered by the patch optimization changes, that no longer
run do_patch if a leaf/final branch is not being processed.
Without this change, invalid patches, or already applied patches in
an existig series file will be re-used which leads to missing files,
or patch errors.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ricardo Neri [Fri, 6 Feb 2015 20:59:58 +0000 (12:59 -0800)]
runqemu: Add option for BIOS binary filename
If we intend to use a custom BIOS binary file, it would be good to be
able to specify the name of the binary via the -bios option of qemu. The
name of the custom binary could be different from the default name used
by qemu. For instance, it was bios.bin in qemu 1.5.0 and changed to
bios-256k.bin for 2.1.0.
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Tomas Novotny [Mon, 9 Feb 2015 14:14:45 +0000 (15:14 +0100)]
qmake_base.bbclass: fix hardcoded paths in a generated qt.conf
The qmake_base class generates internal qt.conf for build with hardcoded
qt4 target paths. This is ok for qt4-x11 as this is the default
$QT_DIR_NAME, but it is wrong for qt4-embedded, because qtopia is its
default directory.
Signed-off-by: Tomas Novotny <tomas.novotny@tbs-biometrics.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ricardo Neri [Fri, 6 Feb 2015 20:59:57 +0000 (12:59 -0800)]
rootfs.py: ignore "NOTE:" when catching warnings
The script looks for any warn|Warn pattern in the log. However,
it may happen that the warn|Warn pattern appears as part of the name
of the objects described in the NOTE lines of the log. Thus, to avoid
false positives, ignore the line if it contains the word "NOTE:"
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Rob Woolley [Fri, 30 Jan 2015 21:55:09 +0000 (16:55 -0500)]
dhcp-client: Ignore partial checksums
dhclient will fail to get an IP address if run inside a guest when traffic is
flowing over a virtual network interface. The user will see the error
message:
5 bad udp checksums in 5 packets
No DHCPOFFERS received.
Unable to obtain a lease on first try. Exiting.
Failed to bring up eth0.
This is because Linux only uses partial checksums for packets that go over
virtual network interfaces and dhclient does not like this.
An extra parameter is added to decode_udp_ip_header() in dhclient to indicate
whether or not dhclient should ignore partial checksums. This is used
when the TP_STATUS_CSUMNOTREADY bit is set by the guest kernel.
This fix has been included in Fedora and Ubuntu, however it has not yet been
accepted by ISC upstream. Likely because it is specific to behaviour in Linux
and other UNIX variants do not seem to be affected.
The patch was imported from the dhcp source RPM in Fedora 21
(http://pkgs.fedoraproject.org/cgit/dhcp.git/tree/dhcp-xen-checksum.patch?h=f21)
Originally contributed to fedora-cvs-commit by David Cantrell on Jan 30 2007
(https://www.redhat.com/archives/fedora-cvs-commits/2007-January/msg01442.html)
Submitted to dhcp-bugs@isc.org - [ISC-Bugs #22806] - by Michael S. Tsirkin
(http://comments.gmane.org/gmane.comp.emulators.kvm.devel/65236)
(https://lists.isc.org/pipermail/dhcp-hackers/2010-April/001835.html)
Upstream-Status: Submitted [dhcp-bugs@isc.org] Signed-off-by: Rob Woolley <rob.woolley@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Richard Purdie [Fri, 13 Feb 2015 13:05:59 +0000 (13:05 +0000)]
gcc-target: Don't install target gcc libdir files
Installing /usr/lib/gcc/* means we'd have two copies, one from gcc-cross
and one from here. These can confuse gcc cross where includes use #include_next
and builds track file dependencies (e.g. perl and its makedepends code).
For determinism we don't install this to the sysroot, ever and rely on the
copy from gcc-cross.
[YOCTO #7287]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Thu, 12 Feb 2015 14:50:11 +0000 (14:50 +0000)]
autotools/siteinfo: Avoid races over siteinfo files
If a siteinfo enabled tasks re-executes at the wrong moment whilst something else is
in do_configure, the _config files can be removed which upsets autoconf and
causes build failures.
Use the same approach as we do for dealing with the aclocal files. We already
parse the manifests so look out any *_config files and if so, copy them, then
reference the copy from siteinfo instead. This has the advantage of also being
more deterministic.
[YOCTO #7101]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cut and paste the pieces of build-aux/options-parser inline into the main
ltmain.sh code. This removes a performance degradation caused by the
repeated calls to func_quote_for_eval, the mechanism funclib uses
to construct the functions used for option parsing.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Mon, 26 Jan 2015 18:19:10 +0000 (13:19 -0500)]
linux-yocto: basic octeon III support
Importing the following commits to add basic octeon III support to the
3.14 linux-yocto kernel:
1e0bbd1dd68e MIPS:OCTEON: More OCTEONIII support f51a5843ee2d MIPS: Octeon: CVMSEG LM loads may cause dcache parity errors 58bcba842781 MIPS: Octeon: Implement the core-16057 workaround ba5a219685e8 MIPS Override assembler ISA for kernel FPU instruction. 7759a0511965 MIPS donot build fast TLB refill handler with 32-bit kernels. 3f51e46ff641 MIPS Add minimal support for OCTEON3 to c-r4k.c bbde024d903a MIPS Add function get ebase cpunum 9f18310679cb MIPS OCTEON Enable use of FPU d24496ee8fc8 MIPS OCTEON Add OCTEON3 to get cpu type
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Robert Yang [Tue, 27 Jan 2015 06:53:55 +0000 (22:53 -0800)]
m4-native 1.4.9: remove it
Its do_compile would be failed once our autoconf-naitve is built:
| /path/to/m4-native/1.4.9-r2/m4-1.4.9/missing: line 54: aclocal-1.10: command not found
| WARNING: `aclocal-1.10' is missing on your system. You should only need it if
| you modified `acinclude.m4' or `configure.ac'. You might want
| to install the `Automake' and `Perl' packages. Grab them from
Also:
| /path/to/m4-native/1.4.9-r2/m4-1.4.9/missing: line 54: automake-1.10: command not found
We don't need keep a native GPLv2 recipe, so remove it.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Robert Yang [Sat, 31 Jan 2015 08:54:07 +0000 (00:54 -0800)]
coreutils 6.9: disable native
ERROR: The recipe coreutils-native is trying to install files into a shared area when those files already exist. Those files and their manifest location are:
tmp/sysroots/x86_64-linux/bin/kill
Matched in manifest-x86_64-util-linux-native.populate_sysroot
We have 8.23, so disable it rather than fix.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Robert Yang [Tue, 27 Jan 2015 08:18:55 +0000 (00:18 -0800)]
gzip 1.3.12: a few fixes
* Let gzip_1.3.12.bb and gzip_1.6.bb use gzip.inc to remove duplicated
code.
* Fixed for gzip_1.3.12.bb:
WARNING: QA Issue: gzip requires /bin/bash, but no providers in its RDEPENDS [file-rdeps]
* Remove native extend from gzip_1.3.12.bb, keep gzip_1.6.bb's.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
The patch 2.5.9 doesn't support --disable-xattr, there are already
PACKAGECONFIG and PACKAGECONFIG[attr] in patch_2.7.1.bb, so remove them from
patch.inc to fix the problem.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Robert Yang [Tue, 27 Jan 2015 06:19:33 +0000 (22:19 -0800)]
matchbox-desktop: remove 0.9.1 and 2.0 version
For 0.9.1:
ERROR: matchbox-wm: Recipe file does not have license file information (LIC_FILES_CHKSUM)
ERROR: Licensing Error: LIC_FILES_CHKSUM does not match, please fix
For 2.0:
| /path/to/matchbox-desktop-2.0/configure: line 2488: syntax error near unexpected token `build_old_libs,'
| /path/to/matchbox-desktop-2.0/configure: line 2488: ` _LT_DECL(build_old_libs, enable_static, 0,'
And there is a matchbox-desktop_git.bb which is "GPLv2+ & LGPLv2+", so remove them.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Robert Yang [Tue, 27 Jan 2015 06:05:43 +0000 (22:05 -0800)]
matchbox-wm 1.2: remove it
It doesn't work:
ERROR: matchbox-wm: Recipe file does not have license file information (LIC_FILES_CHKSUM)
ERROR: Licensing Error: LIC_FILES_CHKSUM does not match, please fix
And there is a matchbox-wm_git.bb, they have the same GPLv2+ license.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Ash Charles [Thu, 29 Jan 2015 21:34:40 +0000 (13:34 -0800)]
busybox: Include 'mesg' utility
The 'dot.profile' supplied by base-files calls 'mesg'. For simple
images using busybox e.g. core-image-minimal, this utility should be
available to avoid errors on login:
-sh: mesg: command not found
Provide mesg with busybox.
Signed-off-by: Ash Charles <ashcharles@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Use kB instead of MB for the partition size to get a better granularity.
This is needed on some SoC (i.mx, omap) where it is necessary to create
partitions as small as 64kB.
Keep the backward compatibility by assuming MB when no unit is provided.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Tested-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl> Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Dan McGregor [Wed, 4 Feb 2015 16:09:12 +0000 (10:09 -0600)]
terminal.py: add tmux new window option
Add a new terminal type that makes a new window in the running tmux
session instead of splitting the window. 80x25 is not enough to run
menuconfig inside a split window, so add the option to create a new
window instead.
Use the new window option by default when the split window would be
less than 19 lines high.
Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca> Signed-off-by: Ross Burton <ross.burton@intel.com>
