License-Update: added MIT license to README; overall license remains as it was Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
License-Update: copyright years Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
vulkan-samples is the official collection, and vulkan-demos
author has stated that he will be mostly contributing there:
https://github.com/SaschaWillems/Vulkan#Khronossamples
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sun, 1 Nov 2020 11:54:20 +0000 (11:54 +0000)]
sstatesig: Remove workaround for bitbake taskhash bug
When trying to lock an individual signature, we see the checksum calculations
of dependent tasks failing. The fix is to remove a bad optimisation within
bitbake but with the removed, we need to remove some bogus code with
OE-Core's sstatesig code too.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sun, 1 Nov 2020 11:47:29 +0000 (11:47 +0000)]
libxcb: Fix install file owner/group
The makefile uses cp -P behind the scenes for installing the tutorial files
and this preserves the build user identity. Fix this to the correct
owner/group. Usually do_package fixes and hides this but it can be seen
in do_install.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem Raj [Sat, 31 Oct 2020 05:20:58 +0000 (22:20 -0700)]
gdb: Update to 10.x release
here is full announcement [1]
Do not add --disable-static, without adding --enable-shared
because certain libraries e.g. libctf expects the default
to be static which is only disabled if --enable-shared is specified
Do not limit make subdirs, this is only needed when building in a
unified tree, here builds are happening from a release tarball so it is
redundant
Khem Raj [Sun, 1 Nov 2020 05:21:40 +0000 (22:21 -0700)]
rpm: Fix error.h handing properly on musl
Ignoring configure fragments when error.h does not exist on system
leaves eflutils half configured, which is seen when gold linker is
enabled because librpm does not have proper dependencies added,
therefore add error.h for non-glibc case and include it when glibc is
not used.
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Sat, 31 Oct 2020 23:31:30 +0000 (00:31 +0100)]
gnutls: explicitly set --with-librt-prefix
* it will try to link with librt from host and if you have it on host (libc6-dev-i386 in ubuntu)
it fails with:
/usr/lib32/librt.so: error: undefined reference to '__clock_settime', version 'GLIBC_PRIVATE'
/usr/lib32/librt.so: error: undefined reference to '__clock_getcpuclockid', version 'GLIBC_PRIVATE'
/usr/lib32/librt.so: error: undefined reference to '__clock_getres', version 'GLIBC_PRIVATE'
/usr/lib32/librt.so: error: undefined reference to '__clock_nanosleep', version 'GLIBC_PRIVATE'
collect2: error: ld returned 1 exit status
in older 3.6.14 it was using /usr/lib32/librt.so from host as well, but without do_compile
failing
Khem Raj [Fri, 30 Oct 2020 19:03:59 +0000 (12:03 -0700)]
musl: Update to latest
Fixes pthread_condvars add support for SIGEV_THREAD_ID times
* 27b2fc9d fix missing-wake regression in pthread_cond_wait
* 7c71792e add support for SIGEV_THREAD_ID timers
* f70375df fix sem_close unmapping of still-referenced semaphore
* 613ccabe refactor setxid return path to use __syscall_ret
* ccba2345 ldso: notify the debugger when we're doing a dlopen
* 4209a7b1 fix setgroups behavior in multithreaded process
* 6ce91ef0 avoid __synccall for setrlimit on kernels with prlimit syscall
* 3437e478 fix reintroduction of errno clobbering by atfork handlers
* 2d0bbe6c fix pthread_cond_wait paired with with priority-inheritance mutex
Richard Leitner [Thu, 29 Oct 2020 18:20:14 +0000 (19:20 +0100)]
deb: export INTERCEPT_DIR for remove actions
During the do_populate_sdk task apt-get purge is called by deb's remove
function. This fails with error messages similiar to the following one
if any of the included packages uses intercepts as the INTERCEPT_DIR
isn't exported:
.../*.postinst: line 4: /postinst_intercept: No such file or directory
Therefore fix it by exporting the INTERCEPT_DIR variable within the
remove function.
Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When install both udev-hwdb and lib32-udev-hwdb as above,
there comes below do_populate_sdk error:
$ bitbake core-image-sato -c populate_sdk
ERROR: Task (/path/core-image-sato.bb:do_populate_sdk) failed with exit code '134'
NOTE: Tasks Summary: Attempted 5554 tasks of which 0 didn't need to be rerun and 1 failed.
$ cat /path/tmp/work/qemux86_64-poky-linux/core-image-sato/1.0-r5/pseudo/pseudo.log
[snip]
inode mismatch: '/path/tmp/work/qemux86_64-poky-linux/core-image-sato/1.0-r5/sdk/image/usr/local/oecore-x86_64/sysroots/core2-64-poky-linux/lib/udev/hwdb.bin' ino 427383040 in db, 427383042 in request.
[snip]
It is because both udev-hwdb and lib32-udev-hwdb will generate
${SDK_OUTPUT}/${SDKTARGETSYSROOT}/lib/udev/hwdb.bin during do_populate_sdk
and it triggers pseudo error.
So clean hwdb.bin before generate hwdb.bin to avoid conflict to
fix the above do_populate_sdk error.
Signed-off-by: Mingli Yu <mingli.yu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Fri, 30 Oct 2020 14:36:44 +0000 (15:36 +0100)]
tune-arm9tdmi.inc: include arm9tdmi in PACKAGE_ARCHS
* when ARM_INSTRUCTION_SET isn't set to thumb, the tune-arm9tdmi.inc isn't
usable and fails with:
ERROR: OE-core's config sanity checker detected a potential misconfiguration.
Either fix the cause of this error or at your own risk disable the checker (see sanity.conf).
Following is the list of potential problems / advisories:
Error, the PACKAGE_ARCHS variable (all any noarch arm armv4 armv4t arm9tdmit fake_arm9tdmi) for DEFAULTTUNE (arm9tdmi) does not contain TUNE_PKGARCH (arm9tdmi).
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jose Quaresma [Thu, 29 Oct 2020 14:28:05 +0000 (14:28 +0000)]
gstreamer1.0-plugins-good: on wayland qt5 needs qtwayland
The code in ext/qt/meson.build looks for the Qt5WaylandClient pkg-config file.
Without this module, qmlglsink will not work with Wayland.
This can be tested by checking whether or not HAVE_QT_WAYLAND has
been added to the cflags in the autogenerated ninja file.
Writen by:
Carlos Rafael Giani
https://lists.openembedded.org/g/openembedded-core/message/143574
Signed-off-by: Jose Quaresma <quaresma.jose@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jose Quaresma [Thu, 29 Oct 2020 14:28:02 +0000 (14:28 +0000)]
gstreamer1.0-libav: upgrade to version 1.18.0
License-Update: All code is now LGPL-2.1+
Starting with 1.17, we will not ship a copy of FFmpeg in our release
tarballs, and all the remaining code is LGPL2.
https://gitlab.freedesktop.org/gstreamer/gst-libav/-/commit/c437e175ad9c82732ac46e36ccc398ad041bf13b
Signed-off-by: Jose Quaresma <quaresma.jose@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jose Quaresma [Thu, 29 Oct 2020 14:27:59 +0000 (14:27 +0000)]
gstreamer1.0-vaapi: upgrade to version 1.18.0
* 0001-vaapsink-downgrade-to-marginal.patch
Removed since these are included in 1.18.0
https://gitlab.freedesktop.org/gstreamer/gstreamer-vaapi/-/commit/13d090b5660a2e2e2c997db44ba9a391101e8bd6
API and plugin documentation are no longer built with gtk_doc.
The gtk_doc documentation has been removed in favour of a new unified
documentation module built with hotdoc.
Distributors should use the documentation release tarball instead of trying
to package hotdoc and building the documentation from scratch.
Signed-off-by: Jose Quaresma <quaresma.jose@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jose Quaresma [Thu, 29 Oct 2020 14:27:47 +0000 (14:27 +0000)]
gstreamer1.0-plugins-base: upgrade to version 1.18.0
* 0001-meson-build-gir-even-when-cross-compiling-if-introsp.patch
* 0002-meson-Add-variables-for-gir-files.patch
Removed since these are included in 1.18.0
License-Update: remove file://common/coverage/coverage-report.pl
Upstream dont have it any more.
API and plugin documentation are no longer built with gtk_doc.
The gtk_doc documentation has been removed in favour of a new unified
documentation module built with hotdoc.
Distributors should use the documentation release tarball instead of trying
to package hotdoc and building the documentation from scratch.
Signed-off-by: Jose Quaresma <quaresma.jose@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
API and plugin documentation are no longer built with gtk_doc.
The gtk_doc documentation has been removed in favour of a new unified
documentation module built with hotdoc.
Distributors should use the documentation release tarball instead of trying
to package hotdoc and building the documentation from scratch.
Signed-off-by: Jose Quaresma <quaresma.jose@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Drop 0001-Do-not-hardcode-lib-as-location-for-site-packages-an.patch,
0001-configure.ac-fix-LIBPL.patch and 0001-python3-Do-not-hardcode-lib-for-distutils.patch
as they are all replaced by the new --platlibdir option to ./configure
Rename 0001-Lib-sysconfig.py-fix-another-place-where-lib-is-hard.patch to
0001-Lib-sysconfig.py-use-libdir-values-from-configuratio.patch
and describe the changes better.
License-Update: documentation now dual license under PSF & BSD
(not relevant for the recipe. Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
