Mihai Lindner [Fri, 10 Aug 2012 09:07:38 +0000 (12:07 +0300)]
sysklogd: removed tabs from syslog.conf
Yocto #2926: syslog.conf should not have tabs within the selector field.
Removed tabs from the selector field of syslog rules. Tabs or spaces
should be used, in syslog.conf, only when separating selectors from
actions.
gettext,m4,augeas,gnutls: Account for removal of gets in eglibc 2.16
These recipes use gnulib which needs this change to use gets
when its defined and not otherwise. Until that change goes into
gnulib and then all these package upgrade gnulib in their sourcebase
we patch them
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Resolved merge conflicts with denzil branch and backported gnutls
patch.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Fix potential stack overflow in get_component() where an individual
pathname component in an extract file (specified on the command line
or in an extract file) could exceed the 1024 byte sized targname
allocated on the stack.
Fix by dynamically allocating targname rather than storing it as
a fixed size on the stack.
Phil Blundell [Mon, 29 Oct 2012 15:20:19 +0000 (15:20 +0000)]
openssl: Use ${CFLAGS} not ${FULL_OPTIMIZATION}
The latter variable is only applicable for target builds and could
result in passing incompatible options (and/or failing to pass
required options) to ${BUILD_CC} for a virtclass-native build.
Signed-off-by: Phil Blundell <philb@gnu.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Stack-based buffer overflow in the url::get_pac function in url.cpp
in libproxy 0.4.x before 0.4.9 allows remote servers to have an
unspecified impact via a large proxy.pac file.
Robert Yang [Tue, 13 Nov 2012 12:56:37 +0000 (20:56 +0800)]
rootfs_rpm.bbclass: save rpmlib rather than remove it
The rpmlib was removed when images that add
"remove_packaging_data_files" to ROOTFS_POSTPROCESS_COMMAND, which would
make the increment rpm image generation doesn't work in the second
build, since list_installed_packages would get incorrect value in the
second build, move the rpmlib to ${T} rather than remove it, and move it
back when INC_RPM_IMAGE_GEN =1.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Roy.Li [Tue, 6 Nov 2012 16:20:48 +0000 (10:20 -0600)]
bitbake: compile tar-replacement firstly
Compiling tar-replacement or not is decided by version of host tar,
if the host tar version is lower than 1.23, Compiling tar-replacement
is needed.
When doing popoluate tar-replacement sysroot to write the tar to
sysroot, but writing is not finished. other packages probably
use the being written tar to unzip file, which will lead to failure
and report the below error:
"bitbake_build/tmp/sysroots/x86_64-linux/usr/bin/tar: Text file busy"
Now we compile tar-replacement firstly to ensure that a being written
tar command will not be used.
Signed-off-by: Joe Slater <jslater@windriver.com> Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Wed, 5 Sep 2012 15:42:15 +0000 (16:42 +0100)]
classes/qmake_base: support linux-gnuspe/linux-uclibcspe TARGET_OS
Fix borrowed from OE-Classic. This should fix build failures during
do_configure of Qt applications with the p1022ds machine from
meta-fsl-ppc, for example.
Martin Jansa [Wed, 3 Oct 2012 03:24:10 +0000 (23:24 -0400)]
openssl: add deprecated and unmaintained find.pl from perl-5.14 to fix perlpath.pl
* openembedded-core/meta/recipes-connectivity/openssl/openssl.inc
*
* is using perlpath.pl:
*
* do_configure () {
* cd util
* perl perlpath.pl ${STAGING_BINDIR_NATIVE}
* ...
*
* and perlpath.pl is using find.pl:
* openssl-1.0.0i/util/perlpath.pl:
* #!/usr/local/bin/perl
* #
* # modify the '#!/usr/local/bin/perl'
* # line in all scripts that rely on perl.
* #
*
* require "find.pl";
* ...
*
* which was removed in perl-5.16.0 and marked as deprecated and
* unmaintained in 5.14 and older:
* /tmp/usr/lib/perl5/5.14.2/find.pl:
* warn "Legacy library @{[(caller(0))[6]]} will be removed from the Perl
* core distribution in the next major release. Please install it from the
* CPAN distribution Perl4::CoreLibs. It is being used at @{[(caller)[1]]},
* line @{[(caller)[2]]}.\n";
*
* # This library is deprecated and unmaintained. It is included for
* # compatibility with Perl 4 scripts which may use it, but it will be
* # removed in a future version of Perl. Please use the File::Find module
* # instead.
Paul Eggleton [Mon, 18 Jun 2012 15:50:50 +0000 (16:50 +0100)]
classes/cml1: ensure -c menuconfig forces a rebuild next time
Ensure the following results in the kernel being rebuilt, repackaged and
re-deployed in the final step:
bitbake virtual/kernel
bitbake -c menuconfig virtual/kernel
[ make changes to the kernel configuration and save ]
bitbake virtual/kernel
If there are no changes to the configuration saved, the rebuild will not
be triggered.
Note that this relies on a function recently added to BitBake and
requires full hashing (i.e. BB_SIGNATURE_HANDLER must be set to a
signature handler that inherits from BasicHash) - if this is not the
case or the function is not available in the version of BitBake being
used this change will do nothing.
Signed-off-by: Darren Hart <dvhart@linux.intel.com> Tested-by: Tom Zanussi <tom.zanussi@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Mon, 17 Sep 2012 12:07:36 +0000 (14:07 +0200)]
pulseaudio: fix pulseaudio-server RDEPENDS
* module-cork-music-on-phone was renamed to module-role-cork
http://cgit.freedesktop.org/pulseaudio/pulseaudio/commit/?id=3c5cc345472302b9511c19244b3eceb4a3674d8c
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
WARNING: QA Issue: bluez4: Files/directories were installed but not shipped
/usr/share/dbus-1
/usr/share/dbus-1/system-services
/usr/share/dbus-1/system-services/org.bluez.service
Paul Eggleton [Mon, 17 Sep 2012 01:05:15 +0000 (22:05 -0300)]
dhcp: remove dependency of dev/staticdev packages on main package
The main package is empty and is not produced, which leaves the dev
and staticdev packages broken. Remove the dependencies (added in
bitbake.conf by default) to fix this.
Paul Eggleton [Fri, 14 Sep 2012 15:04:43 +0000 (16:04 +0100)]
classes/mirrors: remove bogus gnutls mirror
This mirror entry which maps to itself plus a slash, if matched, put the
fetcher into a circular loop until the stack space is exhausted. A patch
has been sent to fix this issue in BitBake, but we should remove the
bogus entry as well.
(Note that this entry does not actually trigger the issue with current
master because the gnutls recipe now uses GNU_MIRROR instead of
ftp.gnutls.org, thus the bogus mirror entry is not matched.)
sysvinit-inittab_2.88dsf.bb: only run serial checks at boot if we have items to check
Right now, we delay running the serial console checks to we boot up. This causes
issues for read only file systems. So, if have not configured any serial ports to
check via SERIAL_CONSOLES_CHECK we can skip the check at boot. This fixes any
issues with read only file systems and ipk packaging.
Signed-off-by: Matthew McClintock <msm@freescale.com>
Remove /etc since it is empty, when creating a machine that does not
deliver any module config files, the /etc is empty and is then warned
about not being shipped, so we remove it.
This occurs in the routerstationpro with the following warning:
WARNING: For recipe linux-yocto, the following files/directories were installed but not shipped in any package:
WARNING: /etc
Richard Purdie [Tue, 11 Sep 2012 14:22:29 +0000 (15:22 +0100)]
autotools.bbclass: Add functionality to force a clean of ${B} when reconfiguring (and ${S} != ${B})
Unfortunately whilst rerunning configure and make against a project will mostly
work there are situations where it does not correctly do the right thing.
In particular, eglibc and gcc will fail out with errors where settings
do not match a previously built configuration. It could be argued they are
broken but the situation is what it is. There is the possibility of more subtle
errors too.
This patch adds removal of the build directory (${B}) when configure is
rerunning, the sstate checksum for do_configure has changed and ${S} != ${B}.
We could simply use a stamp but saving out the previous configuration checksum
adds some data at no real overhead.
If we find there are things where we want to disable this behaviour with
CONFIGURESTAMPFILE = "" in the recipe, or users could disable it globally.
[YOCTO #2774]
[YOCTO #2848]
This is particularly helpful for eglibc and gcc which use split builds by default and
are a particular source of reconfigure type problems.
eglibc_2.15: make patch only for Freescale machines
It's only Freescale machines that don't imlpement fsqrt, we don't want
this to effect others.
This patch was only added after the last release of denzil, so it's not
present in the release yet. Also, 2.15 is removed from master so it
should only apply to denzil branch
Signed-off-by: Matthew McClintock <msm@freescale.com>
Zhenhua Luo [Wed, 12 Sep 2012 08:20:46 +0000 (16:20 +0800)]
valgrind: fix debug info reading error when do memcheck on ppc targets
following is the error message:
--2263-- WARNING: Serious error when reading debug info
--2263-- When reading debug info from /lib/ld-2.13.so:
--2263-- Can't make sense of .got section mapping
--2263-- WARNING: Serious error when reading debug info
--2263-- When reading debug info from /home/root/lzh:
--2263-- Can't make sense of .data section mapping
--2263-- WARNING: Serious error when reading debug info
--2263-- When reading debug info from /usr/lib/valgrind/vgpreload_core-ppc32-linux.so:
--2263-- Can't make sense of .data section mapping
--2263-- WARNING: Serious error when reading debug info
--2263-- When reading debug info from /usr/lib/valgrind/vgpreload_memcheck-ppc32-linux.so:
--2263-- Can't make sense of .data section mapping
--2263-- WARNING: Serious error when reading debug info
--2263-- When reading debug info from /lib/libc-2.13.so:
--2263-- Can't make sense of .data section mapping
This fixes a case when RPATH embedded in program have one of
its path already relative to ORIGIN. We were losing that path
if such a path existed. This patch appends it to the new edited
rpath being created when we see it.
Khem Raj [Tue, 28 Aug 2012 06:41:48 +0000 (08:41 +0200)]
kernel.bbclass: Dont package kxgettext.o
kxgettext.o is generated when building ppc kernels
so we end up with packaging errors like
> ERROR: QA Issue: Architecture did not match (20 to 62) on
> /work/virtex5-poky-linux/linux-xilinx-2.6.38-r00/packages-split/kernel-dev/usr/src/kernel/scripts/kconfig/kxgettext.o
Bruce Ashfield [Tue, 28 Aug 2012 06:41:47 +0000 (08:41 +0200)]
kernel.bbclass: add non-santized kernel provides
If the kernel version string uses characters or symbols that
need to be santized for the package name, we can end up with a
mismatch between module requirements and what the kernel
provides.
The kernel version is pulled from utsrelease.h, which contains
the exact string that was passed to the kernel build, not
one that is santized, this can result in:
At rootfs assembly time, we'll have a dependency issue with the kernel
providing the santizied string and the modules requiring the utsrelease.h
string.
To not break existing use cases, we can add a second provides to the
kernel packaging with the unsantized version string, and allowing the
kernel module packaging to be unchanged.
Darren Hart [Tue, 28 Aug 2012 06:41:46 +0000 (08:41 +0200)]
kernel: Add kernel headers to kernel-dev package
[YOCTO #1614]
Add the kernel headers to the kernel-dev package. This packages what was
already built and kept in sysroots for building modules with bitbake.
Making this available on the target requires removing some additional
host binaries.
Move the location to /usr/src/kernel
Before use on the target, the user will need to:
# cd /usr/src/kernel
# make scripts
This renders the kernel-misc recipe empty, so remove it.
As we use /usr/src/kernel in several places (and I missed one in the
previous version), add a KERNEL_SRC_DIR variable and use that throughout
the class to avoid update errors in the future.
Now that we package the kernel headers, drop the
kernel_package_preprocess function which removed them from PKGD.
All *-sdk image recipes include dev-pkgs, so the kernel-dev package will
be installed by default on all such images.
Signed-off-by: Darren Hart <dvhart@linux.intel.com> CC: Bruce Ashfield <bruce.ashfield@windriver.com> CC: Tom Zanussi <tom.zanussi@intel.com> CC: Khem Raj <raj.khem@gmail.com>
Bruce Ashfield [Tue, 28 Aug 2012 06:41:45 +0000 (08:41 +0200)]
kernel: save $kerndir/tools and $kerndir/lib from pruning
The kernel source tree in the sysroot has all unecessary source
code removed. The existing use case is to support module building
out of the sysroot, but as more toolsa are moved into the kernel
tree itself there are new use cases for the kernel sysroot source.
To avoid putting dependencies on the kernel, and to be able to
individually build and package these tools out of the source tree,
we can save $kerndir/tools and $kernddir/lib from being removed.
This enables tools like perf to be built our of the kernel source
in the sysroot, without significantly increasing the amount of
source in the sysroot.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Tue, 28 Aug 2012 06:41:44 +0000 (08:41 +0200)]
kernel.bbclass: pass KERNEL_VERSION to depmod calls in postinst
* without this, kernel upgrades where KERNEL_VERSION is changed
e.g. 3.4.2 -> 3.4.3 generate .dep for running 3.4.2 and after reboot user ends
up without any module loaded to make it worse after reboot nothing is upgraded
to trigger another kernel(-module) postinst to generate .dep for now running 3.4.3
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Koen Kooi [Tue, 28 Aug 2012 06:41:43 +0000 (08:41 +0200)]
man: make man actually work by installing custom man.config
The default man.conf is named wrong and doesn't work. It references gtbl, while groff installs tbl and other things. This man.conf is imported from OE classic and runtime tested on angstrom.
Before:
root@beaglebone:~# man man
sh: /usr/bin/gtbl: No such file or directory
sh: line 0: echo: write error: Broken pipe
gunzip: write: Broken pipe
gunzip: error inflating
sh: line 0: echo: write error: Broken pipe
sh: line 0: echo: write error: Broken pipe
After:
root@beaglebone:~# man man
MAN(1) Manual pager utils MAN(1)
NAME
man - an interface to the on-line reference manuals
Martin Jansa [Tue, 31 Jul 2012 02:00:01 +0000 (04:00 +0200)]
package.bbclass: fix TypeError in runstrip
* some packages have .ko files which are not elf, without this change
it fails with TypeError, with this change only runstip fails and
reports where:
ERROR: runstrip: ''arm-oe-linux-gnueabi-strip' '/OE/shr-core/tmp-eglibc/work/armv4t-oe-linux-gnueabi/emacs-23.4-r0/package/usr/share/emacs/23.4/etc/tutorials/TUTORIAL.ko'' strip command failed
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 24 Aug 2012 16:12:39 +0000 (16:12 +0000)]
distutils/steuptools: Fix files layout and unbreak builds
The last two distutils changes progressivly broke the builds. Firstly they
moved things from the site_packages directory to being higher up the tree
which introduced package QA warnings as a side effect. Secondly, it interacts
badly with setuptools which passes in --root=${D} itself.
This patch restores the original directory layout, hence fixing the QA
warnings and also passes extra options to setuptools to deal with the
--root option it passes.
distutils.bblass: change order of args to install step
This let's the user override install-lib argument again if it needs
to be something else, otherwise things like python-setuptools
won't be able to modify the install-lib dir
This fixes a new issue exposed by my previous distutils patch
that fixed the python modules default install location
Signed-off-by: Matthew McClintock <msm@freescale.com>
Bruce Ashfield [Wed, 22 Aug 2012 05:18:05 +0000 (01:18 -0400)]
kernel-yocto: set master branch to a defined SRCREV
To support custom repositories that set a SRCREV and that only have
a single master branch, do_validate_branches needs a special case
for 'master'. We can't delete and recreate the branch, since you
cannot delete the current branch, instead we must reset the branch
to the proper SRCREV.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Bruce Ashfield [Thu, 2 Aug 2012 18:12:33 +0000 (14:12 -0400)]
linux-yocto: allow do_validate_branches to handle all branches
Branch validation will not restrict a branch that doesn't exist
in the tree at the time of validation (since you can't reset a
SRCREV on a non-existent branch). This restriction can be removed
by looking for all branches that contain the specified SRCREV
and forcing them to that value.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Jeff Polk [Wed, 27 Jun 2012 16:57:50 +0000 (10:57 -0600)]
recipes-core/eglibc-2.13: Patch for locale-base-tt-ru packaging
The eglibc-2.13 build can fail because locale-base-tt-ru is in
PACKAGES twice. This is because the SUPPORTED list and the i18n
directories are out of sync with each other; the SUPPORTED list
expects a directory named "tt_RU.UTF8", but the directory is
actually named "tt_RU", and likewise for the @iqtelif variants.
Signed-off-by: Peter Seebach <peter.seebach@windriver.com> Signed-off-by: Jeff Polk <jeff.polk@windriver.com> Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
This drops one patch against eglibc for 2.15 and adds two new ones,
also it adds a gcc patch. We use all of these internally and they
are tested quite well.
Signed-off-by: Matthew McClintock <msm@freescale.com>
libpam: disable NIS to not link with libtirpc when it is available
I was checking ways to make incremental builds faster so I started using
sstate-cache and SSTATE_MIRRORS. But this gave me some nasty bug:
| Collected errors:
| * satisfy_dependencies_for: Cannot satisfy the following dependencies
for php-cgi:
| * libtirpc1 (>= 0.2.2) *
| * opkg_install_cmd: Cannot install package php-cgi.
I checked details:
In my previous build libtirpc got built before libpam so libpam found it
and linked. As a result packages depend on libtirpc1 but as there is no
such build dependency sstate handling code did not used libtirpc copy...
Paul Eggleton [Thu, 5 Jul 2012 14:48:23 +0000 (15:48 +0100)]
classes/license: fix manifest to work with deb
Prepend the license manifest creation call to ROOTFS_POSTPROCESS_COMMAND
instead of appending to ROOTFS_POSTINSTALL_COMMAND. The latter is not
implemented for the deb backend (and probably ought to just be removed
completely), and by using _prepend we can still ensure it occurs before
package info is removed (and before buildhistory in case it is needed
there in future).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
If a + character appears in a version specification within the list of
package dependencies, the version will not be removed from the list in
list_package_depends/recommends leading to garbage appearing in the
dependency graphs generated by buildhistory. To avoid any future
problems due to unusual characters appearing in versions, change the
regex to match almost any character.
Fixes [YOCTO #2451].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Saul Wold [Wed, 8 Aug 2012 08:56:24 +0000 (11:56 +0300)]
foomatic: fix perl path for target
This problem appears on F17 when configure finds /bin/perl, since the beh
script is a target side script, we need to set PERL in the do_configure_prepend
in order for the correct perl to be used
Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reworked commit to fix merge conflicts with denzil branch.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Otavio Salvador [Mon, 23 Jul 2012 17:37:17 +0000 (14:37 -0300)]
shadow: use 'users' group by default
The rootfs has 'users' group at number 100 and without this fix it
would assign to a non-existent group and if a group with gid as 1000
is created later it would own all files for users created.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Reworked commit to fix merge conflicts with denzil branch.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Otavio Salvador [Mon, 23 Jul 2012 17:37:16 +0000 (14:37 -0300)]
shadow-native: use 'users' group by default
The rootfs has 'users' group at number 100 and without this fix it
would assign to a non-existent group and if a group with gid as 1000
is created later it would own all files for users created.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Reworked commit to fix merge conflicts with denzil branch.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
u-boot.inc: update linker arguments to pass --sysroot arg
If we are building from sstate-cache it's possible to be building
from another folder on another machine, therefore the linker requires
that a proper --sysroot is passed too it so it can find things like
libgcc.a and avoid errors such as:
