Michel Thebeau [Mon, 8 Apr 2013 20:15:51 +0000 (16:15 -0400)]
kernel.bbclass: do_sizecheck: update path to build image and do not delete
do_sizecheck has a few issues especially with vmlinux image type.
It breaks because KERNEL_OUTPUT is a path relative to ${B}. When
do_sizecheck runs it does not find the file (because the working
directory is elsewhere) and does not fail.
Also, the image file referenced by KERNEL_OUTPUT may be a link.
Finally, when do_sizecheck deletes the oversized kernel image it leaves
the previously run do_compile task with inaccurate status.
So, do the following:
- specify that the working directory should be ${B}
- use ls -L to reference to the real file, and ensure that the link
file is created
- keep the oversized image file so the status of do_compile is valid
[YOCTO #3514]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Michel Thebeau <michel.thebeau@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Mon, 8 Apr 2013 16:18:44 +0000 (17:18 +0100)]
scripts/oe-pkgdata-util: find complementary packages for split packages
Check after getting the original package name (e.g. undoing Debian
renaming) if there is a complementary package for that name, e.g. if
the glob is *-dev, then libudev0 -> libudev -> libudev-dev.
Fixes [YOCTO #4136].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
systemd: Set the default firmware path to enable firmware loading in udev
After some breakage in udev the kernel gained direct firmware loading.
For older kernels (e.g. 3.2 in my case) udev still needs to load the
firmware. Firmware loading is enabled once a default firmware path is
set. Apply a compile fix from the upstream project.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
tcf-agent: Use kill instead of killproc to stop agent
When shutting down a core-image-lsb-sdk image, there is a lot of time spend stopping tcf-agent,
which slows down the whole process. The reason for this slowdown is the fact that it tries in a
loop to kill tcf-agent service by using killproc with the path of the executable and killproc
does not seem to available in lsb images. This patch fixes the issue by using "kill" instead of
"killproc".
When using the sstate from another build machine, the path to the pixbuf
loader's cache points to a path on the remote machine. Hence, the update
of the icon cache fails on host.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
which means that the following test in configure always fails and
--disable-yasm never gets passed to the embedded ffmpeg build:
'if test "x$disable_yasm" = "xyes"; then'
embffmpeg_configure_args="$embffmpeg_configure_args --disable-yasm"
commit 4d309730 ['gst-ffmpeg: configure-fix patch used wrong test']
actually fixed the obviously backwards syntax by reversing the test -
prior to that, --disable-yasm would always unconditionally be passed
into the embedded ffmpeg config.
This fixes things so that the variable actually exists and makes the
test meaningful.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Removed existing definition with machine 47787, this
definition is outdated, a sanity error should occur if an ELF uses this
value.
* Added new definition with machine 189. This value replaces the existing
value since August 2009. See binutils thread for more information.
(http://sourceware.org/ml/binutils/2009-08/msg00127.html)
Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sat, 6 Apr 2013 16:19:05 +0000 (17:19 +0100)]
qemuimage-tests/sanity/boot: Increase timeout
As we've increased the parallelisation on the build servers, we've started to see
core-image-minimal sanity test boot failures where the network never comes up. We
don't see those failures for core-image-sato, its always minimal.
Looking at the results, it can take ~100 seconds for the network to come up,
even on the sato images if the machine has a high load. The timeout for the boot
test is only 120 seconds compared to 400 on every other test.
This change makes the timeout equal for all the tests at 400 seconds in the hope
that the load on the autobuilder is causing the sanity tests to run slowly and
hence triggering the false negatives.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch came from Slackware and address a change in crypt()'s handling
of an invalid seed, which in the past returned an encrypted string and now
returns a NULL.
[YOCTO #4097] related to tinylogin segfault
Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In glibc 2.17, crypt() now expects 2 valid chars for the seed or
it will error out and return a NULL. The tinylogin code took the
result from crypt directly into a strcmp() which caused a segfault
Tinylogin has been deperacted, busybox now has login support, I will
investigate using busybox login support for 1.5.
[YOCTO #4097]
Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Fri, 5 Apr 2013 15:35:29 +0000 (16:35 +0100)]
qemuimage-testlib: silence some key warnings
Set StrictHostKeyChecking to no to silence the fingerprint warnings, and instead
of creating a temporary file for the known hosts and then deleting it just use
/dev/null.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Fri, 5 Apr 2013 15:35:30 +0000 (16:35 +0100)]
connman_test.sh: show all processes when dumping ps
We know the grep failed because the error case is being executed, so don't do
the grep again when attempting to help diagnose the problem, as seeing the full
process list might be useful.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Fri, 5 Apr 2013 15:55:52 +0000 (16:55 +0100)]
lib/oe/classextend.py: avoid extending any kernel package
For multilib and other uses of classextend, we don't want any
dependencies on kernel packages to be extended since there should only
be one kernel variant.
Fixes [YOCTO #2918] (where kernel-dev was being extended.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
postinst-intercepts, qemu.bbclass: fix issue on 32 bit hosts
The intercept scripts fail to run on 32 bit hosts. Apparently, the
current approach worked on 64 bit hosts due to the larger virtual address
space (probably). On 32 bit hosts, however, calling the target binary like:
arm_binary: error while loading shared libraries: arm_binary: failed to
map segment from shared object: Operation not permitted
When run like this, qemu-arm fails to map the arm_binary executable in
memory because it's hitting the lower limit of
/proc/sys/vm/mmap_min_addr. That's because it loads the
ld-linux.so binary successfully, taking into account mmap_min_addr, runs
it, and then ld-linux.so will map the arm_binary at a fixed address but this
will fail because it is below mmap_min_addr. The qemu's guest base probing,
apparently, doesn't work fine when a program runs inside other.
One way around this would be to set mmap_min_addr to 0 (on recent
distributions is set to 65536 to avoid "kernel NULL pointer dereference"
defects) but this approach is not safe.
The other way is to call the binary directly but providing qemu with a
prefix (-L option) in order to find the elf interpreter correctly. This
way, both the target binary and dynamic loader are mapped into memory
under qemu's control and, only after, the dynamic loader is started.
[YOCTO #4179]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 5 Apr 2013 10:00:25 +0000 (10:00 +0000)]
qemuimage-testlib-pythonhelper: Fix process mixups
runqemu-internal runs "ldd qemu-system xxx" and the detection code was returning this
as the PID of qemu. This patch improves the detection code to avoid this problem,
fixing certain race type failures on the autobuilder.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Thu, 4 Apr 2013 16:42:13 +0000 (18:42 +0200)]
dbus: set INHIBIT_UPDATERCD_BBCLASS without sysvinit in features
* fixes udev configure in run-postinsts failing with:
update-rc.d: /etc/init.d/dbus-1: file does not exist
because dbus-udev is installed only with sysvinit in features
but update-rc.d was always called from PN postinst
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Thu, 4 Apr 2013 16:42:12 +0000 (18:42 +0200)]
systemd: set INHIBIT_UPDATERCD_BBCLASS without sysvinit in features
* fixes udev configure in run-postinsts failing with:
update-rc.d: /etc/init.d/systemd-udev: file does not exist
because systemd-udev is installed only with sysvinit in features
but update-rc.d was always called from PN postinst
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This adds two new Terminal classes. It's separated into two, so that opening
a split inside a tmux window is preferred to the other terminal types, but
opening a tmux session is prioritized only slightly higher than screen.
- tmuxrunning: Open a new pane in the current running tmux window. Requires
that the TMUX variable be added to the env whitelist to use it.
- tmux: Open a new tmux session
Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* This is similar to the symlinks provided for the kernel image
in the /boot directory of a file system. The goal is to have
simply named symlinks in /boot that mirror the device tree
name in the kernel sources. This is so that programs like
U-Boot can easily find the default device tree binary in the
/boot directory and use that when booting the kernel.
* Use update-alternatives to handle proper creation and removal
of the symlinks.
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
python: adding missing runtime dependency python-io to python-pprint
When trying to import python-pprint on a minimal image, it reports that
the cStringIO python module is missing.
This is provided with python-io, so we add python-io as runtime
dependency.
The complete observed trace was:
Python 2.7.3 (default, Apr 4 2013, 07:45:36)
[GCC 4.7.2] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import pprint
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib/python2.7/pprint.py", line 40, in <module>
from cStringIO import StringIO as _StringIO
ImportError: No module named cStringIO
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@oss.bmw-carit.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Wed, 3 Apr 2013 18:27:24 +0000 (19:27 +0100)]
icon-naming-utils: import version 0.8.90 from meta-oe
* Use newer version 0.8.90
* Updates to a BBCLASSEXTENDed recipe instead of just a native recipe
* Use PV in SRC_URI instead of hardcoded version number
In copying over the recipe from meta-oe, some minor changes were made:
* Preserve the existing OE-Core nativeperl wrapper usage
* Drop setting of S which is effectively the default value
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Martin Jansa [Wed, 3 Apr 2013 08:49:36 +0000 (10:49 +0200)]
buildhistory: record tag names and show warning when the same tag corresponds to different revision
* persistent cache records tag-srcrev mappings, but is not shared between builders
* when tag is moved in remote repo, all builders should rebuild the component to
use the same source, show warning when revision is different than what was used
in last build
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Qemu update from 1.2 to 1.4 now allows for 16bit depth in guests,
whereby previously only 32bit depth was supported. However,
the new support is broken, so we force 32bit depth in all cases.
MUST_REVERT: on qemu update, if 16bit depth support is working ok
Fixes [YOCTO #3828]
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gst-plugins-bad: disable librsvg when x11 is disabled
librsvg depends on gtk+, which in turn does not support framebuffer
as backend in current version (2.15.24). This patch disables librsvg
when x11 is not in the distro.
The 'armel' override for DKPG_ARCH was causing the meta-toolchain
build to fail. The assignment was moved to an anonymous fragment
of Python code, so it doesn't affect the assignments in
cross-canadian.bbclass anymore, thus fixing the issue.
Martin Jansa [Wed, 20 Mar 2013 15:09:10 +0000 (16:09 +0100)]
util-linux: Use u-a for getopt
* when enable busybox installs getopt to ${base_bindir} and
util-linux to ${bindir}, so there is no file conflict, but
because busybox implementation does not support --long used
by lsb_release (which RDEPENDS on util-linux) we need to use
util-linux getopt even when busybox defconfig has it enabled
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Kevin Strasser [Fri, 22 Mar 2013 20:19:22 +0000 (13:19 -0700)]
archiver: fix srpm archiving build errors
srpm archiving doesn't need to be handled as a different case
when deciding what archive tasks to add.
When srpm is selected as the archiving type, the scripts and logs
archive staging directory ${WORKDIR}/script-logs is cleaned, and
its contents moved out to ${WORKDIR}.
Now that we are including ${WORKDIR}/script-logs in sstate-inputdirs,
the directory must be preserved.
[YOCTO #4032]
Signed-off-by: Kevin Strasser <kevin.strasser@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
during the multilib processing of PREFERRED_VERSION and PREFERRED_PROVIDER,
the code was changed to rename the variable key, to the final key. This along
with the existing code avoids the problems.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Martin Jansa [Thu, 28 Mar 2013 13:54:09 +0000 (14:54 +0100)]
openssh: don't add update-rc.d to RDEPENDS
* sysvinit/systemd assumes that update-rc.d can be inhibited
* with systemd enabled, sysvinit scripts are missing in packages
and update-rc.d needs to be put in BAD_RECOMMENDATIONS to prevent
update-rc.d trying to install them in postinst
* update-rd.c shouldn't be in DEPENDS
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Otavio Salvador [Thu, 28 Mar 2013 16:58:14 +0000 (13:58 -0300)]
linux-firmware: Package Reaktek and Broadcom licenses
The licenses need to be included onto rootfs so we have a new package
for license file when we have multiple packages for same vendor. This
patch does this change for current packages in this specific case.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Thu, 28 Mar 2013 21:54:27 +0000 (22:54 +0100)]
tcf-agent: Don't download epl-v10.html just for LIC_FILES_CHKSUM validation
* it's not part of sources, downloading some html from web is not better
check then using meta/files/common-licenses/EPL-1.0
* http://www.eclipse.org/org/documents/epl-v10.html was changed, plain
text looks the same, but html formating was changed (from MS Word
export to valid XHTML 1.0, changing checksums for this new html
would cause issues for people with old epl-v10.html already on
PREMIRROR, so lets just remove it.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Andreas Müller [Fri, 29 Mar 2013 21:19:57 +0000 (22:19 +0100)]
gtk+: don't provide native build
The only part required from native build is gtk-update-icon-cache. This is
provided by gtk-update-icon-cache-native_3.4.4. This version works properly
with gtk+. The patch was tested for gnome-icon-theme and hicolor-icon-theme by:
1. building xfce/gtk+ (gtk3-less) image
2. checking for existing icon-theme.cache in rootfs
3. running image / open menus + test applications
4. executing 'gtk-update-icon-cache-2.0 --validate <both icon-themes-dirs>'
5. executing 'gtk-update-icon-cache-2.0 -f <both icon-themes-dirs>' + exact size checking
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Poky distro codename info added to /etc/lsb-release file.
lsb_release script will not complain anymore about
the incompleteness of /etc/lsb-release file by
returning an error code.
Increases LSB compliance.
Partial fix for [YOCTO #4071].
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jeff Polk [Mon, 1 Apr 2013 15:52:04 +0000 (09:52 -0600)]
sstate: add -f to mv when moving sstate files into place
Under some conditions (ACLs enabled, NFS) mv can interactively prompt
before overwriting files. Avoid hanging builds in that case by using
-f which should be harmless in other cases.
Signed-off-by: Jeff Polk <jeff.polk@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Mon, 1 Apr 2013 17:09:35 +0000 (10:09 -0700)]
linux-yocto-rt: integrate 3.8.4-rt2
Updating to 3.8.4-rt2 to fix the minor issues found with -rt1.
>From the upstream commit log:
changes since v3.8.4-rt1:
- build fix for i915 (reported by "Luis Claudio R. Goncalves")
- build fix for fscache (reported by tglx)
- build fix for !RT (kernel/softirq.c did not compile)
- per-cpu rwsem fixed for RT (required only by uprobes so far)
- slub: delay the execution of the ->ctor() hook for newly created
objects. This lowers the worst case latencies.
Known issues:
- SLxB is broken on PowerPC.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Mon, 1 Apr 2013 17:09:34 +0000 (10:09 -0700)]
kernel-yocto: use KBRANCH as default build branch
commit 61001aa [kernel-yocto: respect SRC_URI modified branch selection]
changed branch processing such that a branch specified in the SRC_URI
would set the branch forced as the build branch.
This change broke compatibility with the yocto-bsp, linux-yocto-custom
based recipes. These recipes specify the branch to be built via KBRANCH,
but allow the fetcher to use master for keeping the repository up to
date. This means that no explicit branch is set in the SRC_URI and the
routines return the default branch of 'master', which is not what is
set in KBRANCH.
To support this case, we simply pass a default branch into the routine
returning the branch to build, and ensure that the default is KBRANCH
so if no branch is passed in the SRC_URI, KBRANCH is always built.
[YOCTO #4145]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Mon, 1 Apr 2013 17:09:33 +0000 (10:09 -0700)]
linux-yocto/3.8: update mips SA_RESTORER fix
During the 3.8.4 integration there was a build issue on MIPS due to
SA_RESTORER changes. A solution was put in place for mips, but it
didn't cover other impacted architectures.
This is a backport of the proposed fix for the next 3.8-stable,
since the full -stable might not be available in the right timeframe.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Tue, 2 Apr 2013 16:53:14 +0000 (17:53 +0100)]
rpm: Ensure rpm depends on rpm-postinsts
If package-management isn't in IMAGE_FEATURES, the postinstall handler
wasn't being installed. rpm needs to depend on this to ensure it does
get installed.
[YOCTO #4160]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sat, 30 Mar 2013 09:02:35 +0000 (09:02 +0000)]
qemuimage-testlib: Increase qemu startup timeouts
We are seeing timeouts on the autobuilder where qemu does start but the script
doesn't appear to be able to detect it in time. This patch increases the
timeouts since there seems little harm in doing so.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cristian Iorga [Fri, 29 Mar 2013 14:10:51 +0000 (16:10 +0200)]
meta/lib/oe/lsb.py: extract only the needed info from lsb-release
Instead of running lsb_release -a, a lsb_release -ir will be run.
This will prevent issue with distros that don't have all the needed
info in /etc/lsb-release file, in which case lsb_release won't generate
an error code.
Partial fix for [YOCTO #4071]
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Fri, 29 Mar 2013 15:10:22 +0000 (17:10 +0200)]
scripts/contrib/build-perf-test.sh: add option to allow cherry-picking of fix revisions
Adds a -p option to allow cherry-picking of fix revisions.
Removes the final build/sstate directories to stop running out of space.
Runs subsequent tasks even if one test fails.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Stefan Stanacar [Fri, 29 Mar 2013 15:10:20 +0000 (17:10 +0200)]
scripts/contrib/build-perf-test.sh: add a script for build performance tracking
This script runs a series of builds (core-image-sato by default) with
and without sstate cache and collects some metrics (time and size currently).
It takes a commit as argument (-c <rev>) and measures wall clock for
bitbake core-image-sato and virtual/kernel.
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since we provide those files manually (i386_gendis, which is needed for
generating those files, has to be run on host and would fail when
compiling for other architectures), the mentioned compilation targets
in libcpu/ are not needed anymore.
This change will avoid a nasty race condition when running "make -jX
install" resulting in a zero size libebl_i386.so file. The issue happens
because, at "make install" time, the *_dis.h prerequisites will be newer
than the target itself, triggering a chain of recompilations while, in
the same time, the binary files are copied to the destination directory.
Hence, the zero sized file...
[YOCTO #4131]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Andrei Dinu [Thu, 28 Mar 2013 08:23:19 +0000 (10:23 +0200)]
packageinfo.bbclass : extended functionality
Extended the functionality of packageinfo.bbclass
so that the sistem retrieves information about the
files brought in by each package. This is done
(without activating buildhistory) by parsing
the packages-split directory for each package.
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
