Laurentiu Palcu [Thu, 17 Jan 2013 14:58:43 +0000 (16:58 +0200)]
modutils-initscripts: improve modutils.sh
modutils.sh reads /etc/modules to load the listed modules at boot time.
/etc/modules is generated by update-modules which scans
/etc/modules-load.d directory. However, update-modules became obsolete
because the files it generates are not used by modprobe anymore.
Hence, change modutils.sh to scan also /etc/modules-load.d/*.conf and
load the modules listed there.
Basically, the behavior is this:
* if /etc/modules exists, load those modules;
* if the directory /etc/modules-load.d exists, load the modules listed
in the .conf files but ignore those already loaded (from
/etc/modules);
[YOCTO #3598]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
udevd isn't on $PATH and is in different places depending on what version of
udev is being used. Copy the code from initramfs-framework to search for the
right udevd at boot time instead of hard-coding a location.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Constantin Musca [Thu, 17 Jan 2013 15:53:39 +0000 (17:53 +0200)]
pango: use qemu_run_binary instead of pango-native
- use qemu_run_binary from qemu.bbclass to run pango-querymodules
- remove pango-native from DEPENDS in order to do not create
unbuildable dependency chains (e.g. ['gtk+', 'pango', 'pango-native',
'cairo-native', 'directfb-native'])
[YOCTO #3642]
Signed-off-by: Constantin Musca <constantinx.musca@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
base.bbclass: improve the incompatible license logic a bit
Handle the potential case where the recipe level LICENSE contains an
incompatible license, but all of its emitted packages are in fact compatible.
Without this adjustment, it would skip such a recipe.
Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
base.bbclass: use debug messages for INCOMPATIBLE_LICENSE
Spamming potentially over a screenful of messages due to their
INCOMPATIBLE_LICENSE selection seems a bit unnecessary. If the distro was
configured that way, the user likely won't care, and if the user set it, they
likely know the implications, so make the messages debug instead.
Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Wed, 16 Jan 2013 17:00:12 +0000 (17:00 +0000)]
classes/image: improve debug-tweaks ssh server configuration
Create a single postprocessing function that enables no-password logins
for both openssh and dropbear when debug-tweaks is in IMAGE_FEATURES,
changing its behaviour slightly:
* Run it regardless of whether ssh-server-* are in IMAGE_FEATURES so
that it still takes effect if these are installed by adding
dropbear/openssh to IMAGE_INSTALL.
* Enable it to be run from image.bbclass rather than core-image.bbclass
so that it works for images that are using the former.
Second half of the fix for [YOCTO #2578].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Paul Eggleton [Wed, 16 Jan 2013 17:00:11 +0000 (17:00 +0000)]
dropbear: allow configuring blank password option at runtime
Instead of using IMAGE_FEATURES to control something within a recipe,
allow this to be set at runtime, avoiding the need to rebuild dropbear
when we want to change this option.
First half of the fix for [YOCTO #2578].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Paul Eggleton [Wed, 16 Jan 2013 18:09:27 +0000 (18:09 +0000)]
classes/rootfs_*: error out if postinstalls exist with read-only rootfs
If there are postinstall scripts to be run on first boot and
IMAGE_FEATURES contains "read-only-rootfs", we know this will fail on
the target device so just error out during do_rootfs. This check was
already implemented for ipk, so add it to the deb and rpm backends. Also
make all backends use bberror rather than just echo to display the
error.
Fixes [YOCTO #3407].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Without this, we have excessive dependencies leaking into the build. In
particular, glib-2.0 was sucking in python modules even if ptest wasn't in
DISTRO_FEATURES.
Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Wayland is a protocol for a client application to display user interface windows
through the use of a compositing window manager. This package include the
specific set of server-side and client-side C libraries that implement the
protocol.
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Thu, 17 Jan 2013 15:24:58 +0000 (16:24 +0100)]
kernel.bbclass: don't depend on DATETIME
* http://cgit.openembedded.org/openembedded-core/commit/?id=67e77cd948c69798695d5d5f34163ef89339b35a
moved DATETIME dependency from MODULE_TARBALL_BASE_NAME to MODULE_IMAGE_BASE_NAME
but without copying that vardepsexclude
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tom Zanussi [Wed, 16 Jan 2013 15:37:22 +0000 (09:37 -0600)]
lttng-ust: bump PE
The previous lttng-ust had a PE of "1" - that recipe was removed and
replaced with the lttng2-ust recipe, which was renamed back to
lttng-ust. The new recipe had didn't define a PE so got the default
PE of 0 - this adds the PE back and gives it a value of "2", which
reflects the history and fixes the following error:
ERROR: Package version for package lttng-ust went backwards which
would break package feeds from (1:0.16-r1 to 0:2.1.0-r0)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
at do_rootfs time in package postinstall stage, when
/path/to/target/rootfs/etc/init.d/basename is a symlink and points to some path
on target (for example: /etc/init.d/basename.some_package), would fail and the
postinstall execution would be postponed for first boot, on target.
This patch adds the posibility to verify whether the file the symlink
points to actually exists in the target rootfs.
[YOCTO #3716]
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Marko Lindqvist [Tue, 15 Jan 2013 19:36:46 +0000 (21:36 +0200)]
apmd: fix license segment md5sum boundary
Replaced incorrect "firstline" with correct "beginline" for telling
where license segment in file begins. Old md5sum was calculated from
the beginning of the file, not from beginning of the license segment.
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Marko Lindqvist [Tue, 15 Jan 2013 19:36:23 +0000 (21:36 +0200)]
dbus: fix license segment md5sum boundary
Replaced incorrect "firstline" with correct "beginline" for telling
where license segment in file begins. Old md5sum was calculated from
the beginning of the file, not from beginning of the license segment.
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Marko Lindqvist [Tue, 15 Jan 2013 19:35:59 +0000 (21:35 +0200)]
libidn: fix license segment md5sum boundary
Replaced incorrect "firstline" with correct "beginline" for telling
where license segment in file begins. Old md5sum was calculated from
the beginning of the file, not from beginning of the license segment.
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Marko Lindqvist [Tue, 15 Jan 2013 19:35:36 +0000 (21:35 +0200)]
gperf: fix license segment md5sum boundary
Replaced incorrect "firstline" with correct "beginline" for telling
where license segment in file begins. Old md5sum was calculated from
the beginning of the file, not from beginning of the license segment.
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Marko Lindqvist [Tue, 15 Jan 2013 19:35:14 +0000 (21:35 +0200)]
ethtool: fix license segment md5sum boundary
Replaced incorrect "firstline" with correct "beginline" for telling
where license segment in file begins. Old md5sum was calculated from
the beginning of the file, not from beginning of the license segment.
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Marko Lindqvist [Tue, 15 Jan 2013 19:34:49 +0000 (21:34 +0200)]
shadow: fix license segment md5sum boundary
Replaced incorrect "firstline" with correct "beginline" for telling
where license segment in file begins. Old md5sum was calculated from
the beginning of the file, not from beginning of the license segment.
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Marko Lindqvist [Tue, 15 Jan 2013 19:34:29 +0000 (21:34 +0200)]
iptables: fix license segment md5sum boundary
Replaced incorrect "firstline" with correct "beginline" for telling
where license segment in file begins. Old md5sum was calculated from
the beginning of the file, not from beginning of the license segment.
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Marko Lindqvist [Tue, 15 Jan 2013 19:34:04 +0000 (21:34 +0200)]
gzip: fix license segment md5sum boundary
Replaced incorrect "firstline" with correct "beginline" for telling
where license segment in file begins. Old md5sum was calculated from
the beginning of the file, not from beginning of the license segment.
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Marko Lindqvist [Tue, 15 Jan 2013 11:52:11 +0000 (13:52 +0200)]
curl: fix build with automake-1.13
Add obsolete_automake_macros.patch that replaces automake macros
no longer supported by automake-1.13 with modern constructs.
Remove AC_CONFIG_MACRO_DIR override that caused aclocal to fail
since it didn't get m4-directory information.
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Cristian Iorga [Tue, 15 Jan 2013 20:08:46 +0000 (22:08 +0200)]
connman-conf: configures connman in qemu machines
For qemu machines, connman should not configure
virtual wired interfaces. Wired interfaces (eth0)
are assigned static IP addresses by the virtual machine
manager (qemu). This packages places the eth0 interface in
a list of blacklisted interfaces, forbiding connman
administering wired interfaces for qemu machines.
Andrei Dinu [Tue, 15 Jan 2013 09:58:55 +0000 (11:58 +0200)]
Removed undisplayed picture from connman-gnome
- removed the picture that doesn't display in the
connman-gnome "about" section.
- updated the recipe to use the patch when running bitbake
- created a folder with patches named "connman-gnome",
the same as for connman.
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Tom Zanussi [Fri, 11 Jan 2013 23:28:48 +0000 (17:28 -0600)]
recipes-kernel/lttng-2.0: rename to recipes-kernel/lttng
recipes-kernel/lttng was removed by a previous patch, which also
removed the naming conflict that caused the lttng-2.0 version of lttng
to be named recipes-kernel/lttng-2.0. Since the naming conflict has
disappeared, we can go back to the simpler naming.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Tom Zanussi [Fri, 11 Jan 2013 23:28:47 +0000 (17:28 -0600)]
lttng2-ust: rename to lttng-ust
recipes-kernel/lttng/lttng-ust was removed by a previous patch, which
also removed the naming conflict that caused the lttng-2.0 version of
lttng-ust to be named lttng2-ust. lttng2-ust was the only lttng-2.0
recipe to be named in this way and since that was entirely due to the
conflict, we can go back to the consistent naming for it.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Tom Zanussi [Fri, 11 Jan 2013 23:28:46 +0000 (17:28 -0600)]
lttng: remove 'legacy' lttng
This removes 'legacy' lttng - it hasn't actually worked for awhile
now, and has been replaced by equivalent functionality in
recipes-kernel/lttng-2.0 (which will be renamed to lttng in a
follow-up patch).
Fixes [YOCTO #3303].
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Saul Wold [Fri, 11 Jan 2013 23:03:54 +0000 (15:03 -0800)]
xz: LICENSE field is wrong
xz contains a GPLv3 m4 macro which is used at build time, this does not make
the installed or runtime items GPLv3, which is what the LICESNE field pertains
to, therefor remove it from the LICENSE field.
Emilia Ciobanu [Mon, 14 Jan 2013 09:04:33 +0000 (11:04 +0200)]
distrodata: Updated checkpkg task
bitbake -c checkpkg fetches the latest version for all packages,
including the ones from sourceforge and those that have
ununsual package naming.
Also removed all pn-native/nativesdk-pn entries from the resulting
checkpkg.csv file if the system already reported the latest version
for pn.
Eric Bénard [Fri, 11 Jan 2013 13:51:25 +0000 (14:51 +0100)]
add meta-toolchain-qt
- this allows the creation of a SDK containing all the needed
libraries to develop QT4 for X applications
- the recipes were factorized to share as much code as possible
- binaries generated using the toolchain were run tested on an
ARMv7 target
- both qt & qte toolchains were build tested for qemuarm target
and for an ARMv7 target
Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Marko Lindqvist [Thu, 10 Jan 2013 09:59:55 +0000 (11:59 +0200)]
python: replace obsolete automake macros with working ones
Add obsolete_automake_macros.patch for both python-dbus and
python-pygobject that replace automake macros no longer supported
by automake-1.13 with modern constructs.
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Marko Lindqvist [Thu, 10 Jan 2013 18:58:01 +0000 (20:58 +0200)]
coreutils: fix license segment md5sum boundary
Replace incorrect "startline" with correct "beginline" for telling
where license segment in file begins. Old md5sum was calculated
from the beginning of the file, not beginning of the license segment.
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Bruce Ashfield [Thu, 10 Jan 2013 20:49:16 +0000 (15:49 -0500)]
linux-libc-headers: fix headers install in long path name environments
If a build is started in a deep directory structure, or in a path with
long directory names the installation of linux-libc-headers will fail
with:
| make[2]: execvp: /bin/sh: Argument list too long
| make[2]: ***
>From within the kernel Makefiles themselves.
The solution is to patch the kernel build rules with the following
change:
[
scripts/Makefile.headersinst: install headers from scratch file
If headers_install is executed from a deep/long directory structure, the
shell's maximum argument length can be execeeded, which breaks the operation
with:
| make[2]: execvp: /bin/sh: Argument list too long
| make[2]: ***
By dumping the input files to a scratch file and using xargs to read the
input list from the scratch file, we can avoid blowing out the maximum
argument size and install headers in a long path name environment.
]
Until this change, or a similar one, is merged into the mainline kernel, this
change should be applied to any 3.7 or greater libc-headers build.
Upstream-status: Pending
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Wed, 9 Jan 2013 16:48:08 +0000 (16:48 +0000)]
gtk+3: add 3.4.4
Mostly taken from meta-gnome, with some changes.
Instead of depending on gtk+-native, depend on just gdk-pixbuf-native and build
the tool required for the host directly. This saves building the entire GTK+
stack natively just for one tool.
Append a version suffix and use update-alternatives on gtk-update-icon-cache as
with GTK+ 2.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Wed, 9 Jan 2013 16:48:06 +0000 (16:48 +0000)]
gtk+: version installed gtk-update-icon-cache and use alternatives
With GTK+ 3 being added soon we'll have potentially two providers of
gtk-update-icon-cache. Append a version to the binary and use
update-alternatives to ensure that the unversioned name works.
For gtk+-native the alternatives won't take effect, so install a symlink
explicitly. This will break if we have a gtk+3-native but we can fix that if
and when that happens.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Samuel Stirtzel [Thu, 10 Jan 2013 10:35:47 +0000 (11:35 +0100)]
boost: Use PARALLEL_MAKE for bjam
Like make, bjam accepts the parameter -jX for multithreaded execution
do_install also profits from this setting
Tested with a quad core 64bit intel cpu (with hyperthreading) PARALLEL_MAKE="j16"
$ time bitbake boost
before:
real 14m37.433s
user 7m40.785s
sys 4m30.109s
after:
real 7m11.979s
user 12m10.694s
sys 2m47.078s
Also fixes tab indention
Signed-off-by: Samuel Stirtzel <s.stirtzel@googlemail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Florin Sarbu [Thu, 10 Jan 2013 07:01:09 +0000 (09:01 +0200)]
alsa-utils: add bash as a dependency of the alsa-utils-alsaconf rpm.
alsa-utils-alsaconf rpm contains the bash script alsaconf. In order
to have the do_rootfs not error when bash is not brought along in
the rootfs as an explicit dependency, we add it as a dependency
of alsa-utils.
Signed-off-by: Florin Sarbu <florin.sarbu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Hongxu Jia [Thu, 10 Jan 2013 07:58:10 +0000 (15:58 +0800)]
apt-native: fix the creation of apt.conf.sample
1.The file of "apt.conf.sample" is in the outdir, and outdir is assigned
by "os.path.join" with the params of ${D}, ${sysconfdir} and "apt". But
${sysconfdir} is an absolute dir and that let ${D} be discarded.
The following is the help on function os.path.join(a, *p):
Join two or more pathname components, inserting '/' as needed.
If any component is an absolute path, all previous path components
will be discarded.
Use oe.path.join instead which don't have this problem.
2. Create apt.conf.sample if it doesn't exist.
[YOCTO #3677]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Marko Lindqvist [Wed, 9 Jan 2013 12:13:53 +0000 (14:13 +0200)]
harfbuzz: add recipe, version 0.9.10
OpenType text shaping engine HarfBuzz is dependency of pango >= 1.32
This depends on all of glib-2.0, cairo, and freetype to consistently
provide all backends. Otherwise it would, in typical case, depend
on build order of these packages. HarfBuzz configure would pick those
backends for which dependencies happen to be built before it.
Similarly graphite is consistenly disabled if there ever happens
to be recipe for it.
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
Khem Raj [Sat, 5 Jan 2013 03:19:22 +0000 (19:19 -0800)]
udev: Fix build with eglibc 2.17
Link with librt to get definitions of mq_* functions
Fixes errors like below
/home/kraj/work/angstrom/sources/openembedded-core/build/tmp-eglibc/work/armv5te-oe-linux-gnueabi/udev/182-r3/udev-182/src/sd-daemon.c:394:
undefined reference to `mq_getattr'
| collect2: error: ld returned 1 exit status
