Paul Eggleton [Mon, 26 Oct 2015 13:28:26 +0000 (13:28 +0000)]
oeqa/utils/decorators: fix missing keyword arguments on decorators
We need to handle keyword arguments here or sending a keyword argument
to a decorated function that accepts keyword arguments will trigger an
error. (This showed up when testcase decorators were added to the
recipetool.RecipetoolTests.test_recipetool_appendsrcfiles_basic_subdir
test).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Tue, 20 Oct 2015 19:17:58 +0000 (20:17 +0100)]
intercepts/update_icon_cache: use STAGING_DIR_NATIVE from environment
Instead of expecting that the calling postinst has exported
STAGING_LIBDIR_NATIVE (which will get set to the sysroot at package build time
and may not be correct if sstate is used), use the new STAGING_DIR_NATIVE that
is exported by rootfs.py.
[ YOCTO #8547 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Tue, 20 Oct 2015 19:14:12 +0000 (20:14 +0100)]
lib/oe/rootfs: tell intercepts where the native sysroot is
Some intercepts may want to access files in the native sysroot that are not on
$PATH (such as something in $libexecdir) but any use of STAGING_DIR_NATIVE in
the postinst that calls the intercept will be "baked" into the package, so if
sstate is reused it will use paths that may not exist.
Solve this by exporting the location of the native sysroot in the environment so
the postinst and intercept can use an environment variable instead of a bitbake
variable.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Fri, 16 Oct 2015 22:02:26 +0000 (23:02 +0100)]
file: don't replace host file when built natively
To avoid races over the file binaries being replaced mid-build we made
file-native an assume-provided binary and check for it at startup, but target
file still needs a native file binary of the same version to compile the magic
data.
The least invasive way of doing this is to build a native file don't put it on
PATH, and tell the target build where to find the native binary. We do however
want the native libmagic to be installed normally (as for example rpm and
subversion need it) so we can't use NATIVE_PACKAGE_PATH_SUFFIX as that change
libdir.
[ YOCTO #8144 ]
Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Fri, 16 Oct 2015 21:49:26 +0000 (22:49 +0100)]
bitbake: add file-native to ASSUME_PROVIDED
Various key parts of the core classes (for example, do_package and
do_populate_sysroot) currently require file. As it's not possible to build a
file-native without invoking do_populate_sysroot mark file-native as
ASSUME_PROVIDED and expect to use the host's binary.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Richard Purdie [Fri, 23 Oct 2015 03:30:36 +0000 (20:30 -0700)]
populate_sdk_base: Ensure PKGDATA_DIR exists
The code assumes that PKG_DATADIR exists and will fail if an image has not been
generated which creates it. This occurs when something like buildtools-tarball
is built which doesn't have target packages, only nativesdk ones.
Since this shouldn't be fatal, workaround this by creating the missing
directory.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jeremy Puhlman [Fri, 23 Oct 2015 17:18:07 +0000 (10:18 -0700)]
Perl: Use CC version not $Config(gccversion)
Get version data from querying $CC rather then
$Config(gccversion) which comes from running version of
perl. Since perl-native is not likely compiled by gcc
5 at this point, it will never trigger the required
fixes for gcc 5.
[YOCTO #8367]
Signed-off-by: Jeremy Puhlman <jpuhlman@mvista.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Randy Witt [Fri, 23 Oct 2015 02:53:56 +0000 (19:53 -0700)]
wic/utils/oe/misc.py: Preserve PATH when running native tools
Previously exec_native_cmd() would remove all items from PATH except for
the native sysroot. This can cause issues for the tools that are created
using create_wrapper().
Now instead of wiping out the PATH, run a sanity check to check if the
command is in the native sysroot.
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Randy Witt [Fri, 23 Oct 2015 02:46:11 +0000 (19:46 -0700)]
mtools_4.0.18.bb: Use create_wrapper() for mcopy
mcopy uses the IBM850 codepage from gconv. The default install location
for gconv will not match the actual install location since it can be
pulled from sstate. This patch overrides the default location when
running by adding GCONV_PATH to the environment for mcopy.
[YOCTO #7629]
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Robert Yang [Fri, 23 Oct 2015 11:22:04 +0000 (04:22 -0700)]
e2fsprogs: backport a patch to fix filetype for hardlink
Backport a patch to fix hardlinks filetype:
IMAGE_INSTALL_append = " e2fsprogs"
$ ./tmp/sysroots/x86_64-linux/sbin/fsck.ext4 tmp/deploy/images/qemux86/core-image-minimal-qemux86.ext4 -f
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Setting filetype for entry 'fsck.ext2' in /sbin (80) to 1.
Setting filetype for entry 'mkfs.ext4' in /sbin (80) to 1.
Setting filetype for entry 'fsck.ext4' in /sbin (80) to 1.
Setting filetype for entry 'mkfs.ext4dev' in /sbin (80) to 1.
Setting filetype for entry 'fsck.ext3' in /sbin (80) to 1.
Setting filetype for entry 'mkfs.ext2' in /sbin (80) to 1.
Setting filetype for entry 'mkfs.ext3' in /sbin (80) to 1.
Setting filetype for entry 'e2fsck' in /sbin (80) to 1.
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
test.img: ***** FILE SYSTEM WAS MODIFIED *****
test.img: 799/65536 files (0.1% non-contiguous), 14652/262144 blocks
Now when run it again, we may get:
[snip]
Pass 3A: Optimizing directories
[snip]
test.img: ***** FILE SYSTEM WAS MODIFIED *****
test.img: 799/65536 files (0.1% non-contiguous), 14652/262144 blocks
This is fine since it is optimizing, from "man e2fsck":
e2fsck may sometimes optimize a few directories --- for example, if
directory indexing is enabled and a directory is not indexed and would
benefit from being indexed, or if the index structures are corrupted
and need to be rebuilt.
[YOCTO #8544]
Signed-off-by: Ross Burton <ross.burton@intel.com>
Mariano Lopez [Thu, 22 Oct 2015 13:39:20 +0000 (13:39 +0000)]
runqemu-ifup: Check if the tap interface is set up correctly
The process to set up a tap interface is as follows:
- tap interface is created
- An IP address is assigned to the tap interface
- The interface is bring up
- A route is added to the target using the tap
interface
Of all the previous steps, only the first one is
check if it was sucessful. The status of the others
are ignored and all of them are required to have
basic connectivity in the target.
This patch adds the checks for the rest of the stpes
needed to set up the tap interface.
[YOCTO #8550]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Mike Looijmans [Tue, 20 Oct 2015 06:43:47 +0000 (08:43 +0200)]
initscripts/sysfs.sh: Mount devtmpfs on /dev/ if needed
When booting from an initrd disk, or when the kernel config option
DEVTMPFS_MOUNT isn't provided, /dev/ will not be mounted at boot.
This small addition will check if /dev/ is "useful", and if not, will
mount devtmpfs if the kernel provides it.
With this change, it is possible to set an initscripts style image type
to "cpio.gz" and boot it as initrd. Without this change, the image won't
work properly because of the missing devices.
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Ross Burton <ross.burton@intel.com>
Jian Liu [Thu, 8 Oct 2015 06:47:51 +0000 (14:47 +0800)]
base.bbclass: considering multilib when setting LICENSE_EXCLUSION
The PACKAGES is not mapped with MLPREFIX when setting LICENSE_EXCLUSION
in base.bbclass. For example,
For libgcc-dev,
LICENSE_EXCLUSION-libgcc-dev=1
but for lib32-libgcc-dev,
LICENSE_EXCLUSION-libgcc-dev=1
Obviously it is wrong for lib32-libgcc-dev.
Add MLPREFIX before the package name during setting LICENSE_EXCLUSION
Signed-off-by: Jian Liu <jian.liu@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Mark Hatle [Tue, 20 Oct 2015 16:29:37 +0000 (11:29 -0500)]
gcc-target.inc: Add support for executable thats may have a suffix
In the past GCC has used a wildcard to permit generating executables
that may have a suffix, such as .exe. This wild card was lost in one
of the updates. Adding the wild card back in fixes a number of issues
when generating a mingw gcc.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Andre McCurdy [Wed, 21 Oct 2015 03:20:35 +0000 (20:20 -0700)]
cairo: backport fix for compatibility with OpenGL ES 2.0
To maintain compatibility with OpenGL ES 2.0, the matrix in
_cairo_gl_shader_bind_matrix() should be manually transposed,
and GL_FALSE passed as the transpose argument to the
glUniformMatrix3fv() call as it is the only valid value for
that parameter in OpenGL ES 2.0.
Wenzong Fan [Wed, 14 Oct 2015 02:55:17 +0000 (22:55 -0400)]
bzip2: fix bunzip2 -qt returns 0 for corrupt archives
"bzip2 -t FILE" returns 2 if FILE exists, but is not a valid bzip2 file.
"bzip2 -qt FILE" returns 0 when this happens, although it does print out
an error message as is does so.
This has been fix by Debian, just port changes from Debian patch file
"20-legacy.patch".
Jussi Kukkonen [Wed, 21 Oct 2015 13:25:31 +0000 (16:25 +0300)]
gtk+3: Do not try to initialize GL without libgl
Gdk initialization ends up calling epoxy GLX api, which calls exit()
if libGL.so.1 is not present. In practice this prevents all GTK+
applications from starting if GLX is not present.
If opengl and x11 distro features are set, make gtk+3 RDEPEND on libgl.
If opengl and x11 distro features are not set, use #ifdef to prevent
the GL initialization.
Remove libgl dependency from gtk3-demo: it can now run without
libgl (although trying to run the glarea demo will exit in that case).
[YOCTO #8529]
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Khem Raj [Thu, 15 Oct 2015 00:43:12 +0000 (17:43 -0700)]
uclibc: Fix build with gcc5
An agressive optimization in gcc5 meant that we get linking errors
with uclibc build, this patch fixes the issue by letting gcc know
that these funcitons are used.
Change-Id: I8ecf3999a0855b3bbf4bc2df576be5351f9be5b0 Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
scripts/oe-publish-sdk: create directory before making git repo
This patch fixes a small bug that prevents seting a git repo in exported SDK
layers dir. Before setting a git repo, that directory needs to be created.
[ YOCTO #6659 ]
Signed-off-by: Costin Constantin <costin.c.constantin@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ed Bartosh [Wed, 21 Oct 2015 16:18:08 +0000 (16:18 +0000)]
rootfs.py: add more info to the warning message
Since the log_check_regex can potentially be false positive it
makes sense to print the whole line where error is found.
This way user will be able to see the error and understand
if it's valid or not.
[YOCTO: #7789]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Markus Lehtonen [Fri, 16 Oct 2015 10:37:32 +0000 (13:37 +0300)]
package signing: automatically export public keys
Automatically export public key(s) of the signing key(s) from the gpg
keyring. Adds a new simple recipe that does the actual task of exporting
the keys. This patch makes the RPM_GPG_PUBKEY and PACKAGE_FEED_GPG
PUBKEY settings obsolete.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Markus Lehtonen [Thu, 15 Oct 2015 11:35:20 +0000 (14:35 +0300)]
sign_rpm.bbclass: make RPM_GPG_NAME a mandatory setting
Simplifies the configuration. Makes way for the removal of
RPM_GPG_PUBKEY setting and possible future implementation of a separate
signing server support. Also, moves the configuration sanity checking
into a separate function.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Markus Lehtonen [Wed, 14 Oct 2015 13:54:42 +0000 (16:54 +0300)]
package_manager: support GPG_PATH variable
If defined, use GPG_PATH as the gpg home directory when signing package
feeds. This setting is only used by package_manager if package feed
singning has been enabled, i.e. PACKAGE_FEED_SIGN="1".
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
If ccache is enabled, compiling apr-utils fails with the following error
messages because libtool is confused by the "ccache gcc" appearing on
the command line. Disable ccache for apr, so that ccache don't get
enabled in all software using apr's rules.mk.
The error message from apr-utils-native:
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Bruce Ashfield [Fri, 23 Oct 2015 20:18:32 +0000 (16:18 -0400)]
linux-yocto: skip kernel meta data branches when finding machine branch
Before the fetcher validated the specified SRCREV was reachable on a
specified branch, linux-yocto style kernel's were comparing the value
of KBRANCH and branch on the SRC_URI and then allowing a SRC_URI
specified branch to override KBRANCH.
With the introduction of kernel meta data on the SRC_URI, this routine
is incorrectly picking up a kernel-cache repository and then attempting
to apply that branch information to the kernel repository.
The rationalization of the branch specification is largely no longer
required, and will may be removed in the future. But for now, to keep
changes minimal, we can simply not return branch information that comes
from kernel meta data by checking the 'type' parameter and skipping
if it is of type 'kmeta'.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Fri, 23 Oct 2015 20:18:29 +0000 (16:18 -0400)]
linux-yocto/4.1: drm/i915: Fix the VBT child device parsing for BSW
Updating the 4.1 SRCREVs to integrate the following fix:
[
drm/i915: Fix the VBT child device parsing for BSW
Recent BSW VBT has a VBT child device size 37 bytes instead of the 33
bytes our code assumes. This means we fail to parse the VBT and thus
fail to detect eDP ports properly and just register them as DP ports
instead.
Fix it up by using the reported child device size from the VBT instead
of assuming it matches out struct defintions.
The latest spec I have shows that the child device size should be 36
bytes for rev >= 195, however on my BSW the size is actually 37 bytes.
And our current struct definition is 33 bytes.
Feels like the entire VBT parses would need to be rewritten to handle
changes in the layout better, but for now I've decided to do just the
bare minimum to get my eDP port back.
Cc: Vijay Purushothaman <vijay.a.purushothaman@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit 90e4f1592bb6e82f6690f0e05a8aadcf04d7bce7) Signed-off-by: abdul arif abdul muttalib
<abdul.arif.b.abdul.muttalib@intel.com> Signed-off-by: Tan Jui Nee <jui.nee.tan@intel.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
archiver.bbclass: Fixes and improves archiver class for kernel and gcc packages
gcc packages use a shared source directory, this causes an issue since the archiver will
try to patch the same source several times (one for each gcc package), producing an error,
the archiver class used stamp-base to check this, nonetheless our gcc packages no longer
use stamp-base, they use gcc-shared instead, which is what broke this functionality.
This patch adds a check to see whether or not the source should be patched,
avoiding patching the source when it shouldn't.
Also, we dont need to create multiple identical tarballs for all gcc packages,
this patch fixes this and creates a single source tarball for gcc.
When requesting patched sources, a race condition is created for linux-yocto tasks,
unpack_and_patch is executed along with kernel_configme, which most of the time
causes errors during configure, since kernel_configme task is specific to the kernel,
simply modifying the tasks order by creating a dependency to kernel_configme was impossible,
causing errors on all other packages that didnt use kernel_configme, this is fixed by
creating a special case for the kernel, adding tasks with correct dependencies,
avoiding the race condition and behaving the way it should for all other packages as well.
[YOCTO #8378]
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Fri, 16 Oct 2015 10:44:49 +0000 (11:44 +0100)]
oeqa/selftest: clean up selftest.inc in teardown
Test cases may want to do call bitbake in setUpClass() but at that point the
previous selftest.inc is still present which could change the build
configuration and result in any built artifacts being removed in the next
bitbake invocation as part of the sysroot clean up.
Resolve this by cleaning selftest.inc in the tearDown, the clean in setUp should
be considered a safety net.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Thu, 15 Oct 2015 15:53:47 +0000 (16:53 +0100)]
oeqa/selftest/wic: fix cleaning
In some situations the native tools built in setUpClass() are wiped from the
sysroot by the time the tests are executed, likely due to the cleanup performed
in the base setUp() method.
Avoid this by doing all of the preparatory building in setUpLocal.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Mon, 12 Oct 2015 11:55:04 +0000 (12:55 +0100)]
oeqa/selftest: verify that devtool can use plugins in other layers
In selftest we want to exercise devtool's ability to use plugins from other
layers, so add a basic command to reverse a string to meta-selftest and a test
in oe-selftest to call it.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Tue, 20 Oct 2015 12:49:04 +0000 (13:49 +0100)]
oeqa/selftest/bbtests: clean up local DL_DIR/SSTATE_DIR safely
Now that the selftests clean selftest.inc in the tearDown using bitbake in a
function passed to addCleanup (which happens after teardown) will use the
default configuration and not the customised one.
As the intention was to clean away the temporary DL_DIR and SSTATE_DIR, simple
use track_for_cleanup to delete the entire directory instead.
Signed-off-by: Ross Burton <ross.burton@intel.com>
oeqa/utils/ftools: Ignore the exception if file does not exist
There may be cases where the configuration file (path) does not exist,
thus the remove_from_file should catch this exception. In case the exception
is not the latter (errno.ENOENT), then re-raise it.
[YOCTO #8540]
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
oeqa/selftest/manifest.py: Test support for manifests
adding support for tests to verify that manifest contents
contain entries that exist in an specified pkgdata dir
tests added:
- manifest.VerifyManifest.test_image_manifest_entries
- manifest.VerifyManifest.test_SDK_manifest_entries
test support written for future tests:
-adding a setUpClass that supports other manifest tests
-a get dir from bb var function that verifies if the dir exists
-a ManifestEntry class defined with missing items list
-check for the paths and fail gracefully if not there
-debug prints for failure analysis
[YOCTO#8028]
Signed-off-by: Benjamin Esquivel <benjamin.esquivel@linux.intel.com> Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
useradd_base.bbclass: Do not warn without a reason
In c0da4270c76375a7a8cbcc09319fe4570ebbc5bd two bbwarn were changed to
bbnote for the case where an added user or group already exists. The
same should have been done for groupmems, groupdel and userdel as well
since the warnings that are currently generated are superflouous.
The two remaining similar bbwarn for groupmod and usermod are left as
is since there they actually make sense.
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Tue, 20 Oct 2015 21:19:08 +0000 (22:19 +0100)]
qemu: disable Valgrind
Qemu has an automatic dependency on valgrind which cannot be disabled, which
causes non-deterministic builds and build failures. As Valgrind wasn't enabled
previously make this deterministic by forcibly disabling it.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Matt Madison [Tue, 20 Oct 2015 14:28:05 +0000 (07:28 -0700)]
i2c-tools: fix inverted RDEPENDS
The runtime dependency between i2c-tools and i2c-tools-misc was
backwards when the packages were split. With this change,
including i2c-tools in an image no longer drags in perl.
Signed-off-by: Matt Madison <matt@madison.systems> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Mon, 19 Oct 2015 21:42:47 +0000 (22:42 +0100)]
rpm: remove spurious build dependencies
make, patch and binutils are assumed to exist on the host, so there's no need to
have them in DEPENDS and can result in the building of make-native for no good
reason.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Mark Hatle [Mon, 19 Oct 2015 15:29:49 +0000 (10:29 -0500)]
gcc-5.2: Fix various _FOR_BUILD and related variables
When doing a FOR_BUILD thing, you have to override CFLAGS with
CFLAGS_FOR_BUILD. And if you use C++, you also have to override
CXXFLAGS with CXXFLAGS_FOR_BUILD.
Without this, when building for mingw, you end up trying to use
the mingw headers for a host build.
The same goes for other variables as well, such as CPPFLAGS,
CPP, and GMPINC.
Signed-off-by: Peter Seebach <peter.seebach@windriver.com> Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
populate SDK: prepare calling of bb.utils for exceptions
bb.utils.remove, bb.utils.movefile and bb.utils.mkdirhier can throw
exceptions that need handling and proper error messages
more work is required for these methods to handle properly the
exceptions that can be raised within the various OS calls they make
but this is a start to at least not hide the errors in the requested
operations
[YOCTO#8213]
Signed-off-by: Benjamin Esquivel <benjamin.esquivel@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Paul Eggleton [Wed, 14 Oct 2015 18:19:23 +0000 (19:19 +0100)]
devtool: handle virtual providers
For modify / extract / upgrade, if the specified "recipe" is not
actually a recipe but a virtual target such as virtual/kernel, map it
correctly to the actual recipe and make sure we use that name within the
workspace. Thanks to Chris Larson for reminding me this was still broken
and for a hint on how to fix it.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Paul Eggleton [Mon, 19 Oct 2015 16:33:11 +0000 (17:33 +0100)]
classes/populate_sdk_ext: detect and warn if running in OE environment
If you run the extensible SDK environment setup script in a shell
session where oe-init-build-env has been run already, and attempt to use
the two together, strange things happen - you may not even be running
devtool from the extensible SDK, but the OE tree. This isn't a supported
use case anyway, so show a warning recommending starting a new shell
session.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Mon, 19 Oct 2015 16:33:09 +0000 (17:33 +0100)]
classes/populate_sdk_ext: prevent image construction from executing on install
In order to prepare the build system within the extensible SDK, we
actually go ahead and build the targets specified by SDK_TARGETS (by
default the image the SDK was built for). Assuming that's an image, we
don't actually need to build the image itself - we just need to have
everything done up to the point before building the image, so that we
have everything needed in the sysroot.
In order to do this, create temporary bbappends for each of the targets
in the workspace layer that stub out do_rootfs and related tasks if they
exist. This is a little bit of a hack but is the least intrusive fix at
this point. To make things a bit tidier, I have split out the
preparation commands into a separate script so we can run that in the
appropriate environment rather than all the commands separately.
Fixes [YOCTO #7590].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mariano Lopez [Thu, 15 Oct 2015 06:29:38 +0000 (06:29 +0000)]
oeqa/runtime: Fix setUp and tearDown methods
Currently some of the runtime test overwrites
the setUp and tearDown methods provided by
oeRuntimeTest, this will avoid some checks
required when running the test suit.
This patch changes the setUp and tearDown methods
for their local counterparts, so when these
tests are called, it will run the parent setUp
and tearDown and also the local ones.
[YOCTO #8465]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Mariano Lopez [Thu, 15 Oct 2015 06:29:37 +0000 (06:29 +0000)]
oetest: Add tearDownLocal class
In the current state there are some runtime test that
don't run the tearDown method fromm oeRuntimeTest class
because the tearDown class is overwritten in the child
class.
This change adds tearDownLocal method in oeRuntimeTest
class that will run after tearDown. This method can be
overwritten in the child classes to implement specific
test functionality.
[YOCTO #8465]
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Paul Eggleton [Fri, 16 Oct 2015 10:34:39 +0000 (11:34 +0100)]
scripts/gen-lockedsig-cache: fix race with temp file creation
As part of populating the sstate-cache with an artifact (.tgz file) we
create a temp file and then atomically move it to the final name. Due to
the glob used in this script such temp files were being matched, and
between the time they were matched and the time the script started
copying files, the temp file may have vanished.
This fixes random "No such file or directory" failures building the
extensible SDK on build setups where the sstate-cache directory is shared
amongst multiple build machines.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Maxin B. John [Thu, 15 Oct 2015 07:00:40 +0000 (10:00 +0300)]
toolchain-shar-extract.sh: provide proper path for env_setup_script
The toolchain install script suggest the user to source env_setup_script
from wrong path now. eg:
" Each time you wish to use the SDK in a new shell session, you need to
source the environment setup script e.g.
$ . /opt/poky/2.0//opt/poky/2.0/environment-setup-armv5e-poky-linux-gnueabi
"
fix it.
Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Joe MacDonald [Wed, 14 Oct 2015 19:27:53 +0000 (15:27 -0400)]
classes/base: provide hints on PACKAGECONFIG error
Commit 771f89498c introduces an error message that is very rarely hit and
when it is, it is usually easy to trace the root cause very quickly. The
information provided in the error message isn't enough to lead you back to
the actual failure, however, so expand upon it a bit, pinpointing the
specific package and flag that fails.
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ross Burton [Tue, 13 Oct 2015 14:52:20 +0000 (15:52 +0100)]
metadata_scm: rewrite git hash logic
The code to get the git and branch hash for the current commit in a specific
repository was quite complex and prone to breakage, replace it with subprocess
and git rev-parse.
Signed-off-by: Ross Burton <ross.burton@intel.com>
