From 2f0458ffd2bad4b582666a57c474d0a2c78dd02f Mon Sep 17 00:00:00 2001 From: Lauren Post Date: Thu, 4 Sep 2014 08:12:54 -0500 Subject: [PATCH] imx6slevk.conf: Add the imx6slevk-pf200 device tree Add support for pfuze200 on imx6slevk Move pmic device node from imx6sl-evk.dtsi to upper-level, and add another layer on imx6sl-evk to diff pfuze100 or pfuze200. Meanwhile only works in ldo-enable mode if using pfuze200, since 'SW1C' switch regulator is cut for cost-down which means VDDARM_IN and VDDSOC_IN have to share the same switch regulator Signed-off-by: Lauren Post Signed-off-by: Otavio Salvador --- meta-fsl-arm/conf/machine/imx6slevk.conf | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/meta-fsl-arm/conf/machine/imx6slevk.conf b/meta-fsl-arm/conf/machine/imx6slevk.conf index cffbd0b0..533f85a8 100644 --- a/meta-fsl-arm/conf/machine/imx6slevk.conf +++ b/meta-fsl-arm/conf/machine/imx6slevk.conf @@ -9,7 +9,8 @@ include conf/machine/include/tune-cortexa9.inc SOC_FAMILY = "mx6:mx6sl" -KERNEL_DEVICETREE = "imx6sl-evk.dtb imx6sl-evk-csi.dtb imx6sl-evk-ldo.dtb" +KERNEL_DEVICETREE = "imx6sl-evk.dtb imx6sl-evk-csi.dtb imx6sl-evk-ldo.dtb \ + imx6sl-evk-pf200.dtb" UBOOT_CONFIG ??= "sd" UBOOT_CONFIG[sd] = "mx6slevk_config,sdcard" -- 2.40.1